X. Leroy.
Lessons learned from the translation of documentation
from LATEX to html.
ERCIM/W4G Int. Workshop on WWW Authoring and Integration
Tools, 1995.
Available on the web at
http://cristal.inria.fr/~xleroy/w4g.html
Bert Bos,
Tantek Çelik,
Ian Hickson
and
Håkon Wium Lie.
Cascading Style Sheets, Level 2 Revision 2 Specification. Available on
the web at
http://www.w3.org/TR/REC-CSS2/, 2011.
LATEX comments that start with “%” and end at end of line are ignored and produce no output.
Usually, HEVEA ignore such comments. However, HEVEA processes
text that follows “%HEVEA” and some other comments have a specific meaning to it (see
section 5.3).
Command names follow strict LATEX syntax. That is, apart from
#, $, ~, _ and ^, they either are
“\” followed by a single non-letter character or
“\” followed by a sequence of letters.
Additionally, the letter sequence may be preceded by “@”
(and this is the case of many of HEVEA internal commands), or
terminated by “*” (starred variants are implemented as plain
commands).
Users are strongly advised to follow strict LATEX syntax for
arguments. That is, mandatory arguments are enclosed in curly braces
{… } and braces inside arguments must be properly
balanced.
Optional arguments are enclosed in square brackets […
].
However, HEVEA does its best to read arguments even when they are
not enclosed in curly braces.
Such arguments are a single, different from “\”, “{”
and “”, character or
a command name.
Thus, constructs such as \'ecole,
$a_1$ or $a_\Gamma$ are
recognized and processed as école a1 and aΓ.
By contrast, a^\mbox{...} is not recognized
and must be written a^{\mbox{...}}.
Also note that, by contrast with LATEX, comments are parsed during
argument scanning, as an important consequence brace nesting is also
checked inside comments.
With respect to previous versions,
HEVEA has been improved as regards emulation of complicated
argument passing. That is,
commands and their arguments can now appear in
different static text bodies. As a consequence,
HEVEA correctly processes the following source:
\newcommand{\boite}{\textbf}
\boite{In bold}
The definition of \boite makes it reduces as
\textbf and HEVEA succeeds in fetching the argument
“{In bold}”. We get
In bold
The above example arguably is no “legal” LATEX,
but HEVEA handles it.
Of course, there remains
numerous “clever” LATEX tricks that exploits TEX internal
behaviour, which HEVEA does not handle.
For instance consider the following source:
\newcommand{\boite}[1]{\textbf#1}
\boite{{In bold}, Not in Bold.}
LATEX typesets the text “In bold” using bold font, leaving
the rest of the text alone. While HEVEA typesets everything using
bold font. Here is HEVEA output:
In bold, Not in Bold.
Note that, in most similar situations, HEVEA will likely crash.
As a conclusion of this important section,
Users are strongly advised to use ordinary command names and
curly braces and not to think too much the TEX way.
B.1.2 Environments
Environment opening and closing is performed like in LATEX, with
\begin{env} and
\end{env}.
The *-form of an environment is a plain environment.
It is not advised to use \env and
\endenv in place of \begin{env} and
\end{env}.
B.1.3 Fragile Commands
Fragile commands are not relevant to HEVEA and \protect is
defined as a null command.
B.1.4 Declarations
Scope rules are the same as in LATEX.
B.1.5 Invisible Commands
I am a bit lost here. However spaces in the output should correspond
to users expectations. Note that, to HEVEA being
invisible commands is a static property attached to command name.
B.1.6 The \\ Command
The \\ and \\* commands are the same, they perform a
line break, except inside arrays where they end the current row.
Optional arguments to \\ and \\* are ignored.
hevea-2.23-manual/manual031.html 0000644 0043171 0051216 00000007570 12477067073 016446 0 ustar maranget cristal
Figures and Other Floating Bodies
B.9 Figures and Other Floating Bodies
Figures and tables are put where they appear in source, regardless of
their placement arguments.
They are outputted inside a BLOCKQUOTE element and they are
separated from enclosing text by two
horizontal rules.
Captions and cross referencing are handled.
However captions are not moved at end of figures: instead, they appear
where the \caption commands occur in source code.
The \suppressfloats command does nothing and the
figure related counters (such as topnumber) exist but are useless.
Marginal notes go in the right margin by default.
To get marginal notes in the left margin, use
\reversemaginpar.
Marginal notes are handled in an HEVEA specific way.
By default, all notes go in the right margin.
Issuing \reversemarginpar causes the notes to go in the left
margin. Unsurprisingly, issuing \normalmarginpar reverts to
default behaviour.
The \marginpar command has an optional argument.
\marginpar[left_text]{right_text}
If optional argument left_text is present and that notes
go in the left margin, then left_text is the text of the
note. Otherwise, right_text is the text of the note.
As a conclusion, marginal notes in HEVEA always go to a fixed side
of the page, which side being controlled by the commands
\normalmarginpar (right side) and \reversemarginpar
(left side). This departs form LATEX that selects a default side
depending on the parity of the page counter.
Marginal notes are styled by the means of two environment style
classes (see Section 9.3) :
marginpar and marginparside.
The latter marginparside takes care of margins and placement as
a float, its value is marginparright for notes in the right
margin and marginparleft for notes in the left margin.
Users are not expected to alter those.
The marginpar environment style class governs the general
aspect of all marginal notes.
Users can control the aspect of all marginal notes by defining a new
style class and assigning the marginpar environment style
class.
For instance, to get all marginal notes in red font,
and taking 10% of the page width (in place of the default
20%),
one can issue the following commands in the document preamble.
The three ways to use math mode ($…$,
\(…\) and
\begin{math}…\end{math}) are supported.
The three ways to use display math mode ($$…$$,
\[…\] and
\begin{displaymath}… \end{displaymath}) are also
supported.
Furthermore, \ensuremath behaves as expected.
The equation, eqnarray, eqnarray* environments
are supported.
Equation labelling and numbering is performed in the first two
environments, using the equation counter.
Additionally, numbering can be suppressed in one row of an
eqnarray, using the \nonumber command.
Math mode is not as powerful in HEVEA as in LATEX. The
limitations of math mode can often be surpassed by using math display
mode. As a matter of fact, math mode is for in-text formulas. From
the html point of view, this means that math mode does not close
the current flow of text and that formulas in math mode must be
rendered using text-level elements only. By contrast, displayed
formulas can be rendered using block-level elements. This means that
HEVEA have much more possibilities in display context than inside
normal flow of text. In particular, stacking text elements one above
the over is possible only in display context.
For instance compare how HEVEA renders
$\frac{1}{\sum_{i=1}^{\infty} i$
as: 1/∑i=1∞i, and
$$\frac{1}{\sum_{i=1}^{\infty} i$$ as:
1
∞
∑
i=1
i
B.7.2 Common Structures
HEVEA admits, subscript (_), superscripts (^) and
fractions (\frac{numer}{denom}).
The best effect is obtained in display mode, where html
table element is extensively used.
By contrast, when not in display mode, HEVEA uses only
SUB and SUP text-level elements to render superscrits
and subscript, and the result may not be very satisfying.
However,
simple subscripts and superscripts, such as x_i or x^2,
are always rendered using the SUB
and SUP text-level elements and their appearance should be correct
even in in-text formulas.
When occurring outside math mode, characters _ and ^ act as
ordinary characters and get echoed to the output. However, a warning
is issued.
An attempt is made to render all ellipsis constructs (\ldots,
\cdots, \vdots and \ddots). The effect may be
strange for the latter two.
B.7.3 Square Root
The nth root command \sqrt is supported only for n=3,4, thanks to the existence of Unicode characters for the same. For the others, we shift to fractional exponents, in which case, the \sqrt command is
defined as follows:
\newcommand{\sqrt}[3][2]{\left(#2\right)^{1/#1}}
Then, the source
fragment: $$\sqrt[5]{\frac{1}{n!}} + \sqrt[3]{\pi} + \sqrt{\pi}$$ gets rendered
as follows:
⎛
⎜
⎜
⎝
1
n!
⎞
⎟
⎟
⎠
1
5
+
∛
π
+
√
π
B.7.4 Unicode and mathematical symbols
The support for unicode symbols offered by modern browsers allows to
translate almost all math symbols correctly.
Log-like functions and variable sized-symbols are recognized and their
subscripts and superscripts are put where they should in display mode.
Subscript and superscript placement can be changed using the
\limits and \nolimits commands.
Big delimiters are also handled.
B.7.5 Putting one thing above/below/inside
The commands \stackrel, \underline and \overline
are recognized.
They produce sensible output in display mode.
In text mode, these macros call the \textstackrel,
\textunderline and \textoverline macros.
These macros perform the following default actions
\textstackrel
Performs ordinary superscripting.
\textunderline
Underlines its argument, using the
U text-level element.
\textoverline
Overlines using style-sheets (used <SPAN> with a top border).
The command \boxed works well both in display and normal math mode. Input of the form \boxed{\frac{\pi}{2}} produces π/2 in normal math, and
π
2
in display-math mode. The commands \bigl,\bigr etc. are also rendered well. Some examples can be found here.
B.7.6 Math accents
Math accents that have coresponding text accents
(\hat, \tilde, etc.) are
handled by default. They in fact act as the
corresponding text-mode accents (Section B.3.4).
As a consequence, they work properly only on ascii letters.
This may be quite cumbersome, but at least some warnings draw user’s
attention on the problem.
If accents are critical to your document and that HEVEA issues
a lot of warnings, a solution is to redefine the math accent command.
A suggested replacement is using limit superscripts.
That way accents are positioned above symbols in display mode and
after symbols in text mode.
Whereas, with the default of \hat being \^,
you get “µ = δ”, with the following warnings:
./tmp.tex:4652: Warning: Application of '\^' on '\mu' failed
./tmp.tex:4652: Warning: Application of '\^' on '\delta' failed
The \vec
command is rendered differently in display and non-display mode. In
display mode, the arrow appears in normal position, while in
non-display the arrow appears as an ordinary superscript.
\vec{u} in text mode: u→,
\vec{u} in display mode:
→
u
Most “extensible accents” (\widetilde, \widehat, etc.)
are not even defined.
There are a few exceptions: line “accents”:
abc
\underline
abc
\overline
Brace “accents”:
1 × 2 × ⋯ × n
◥
▼
◤
\underbrace
◢
▲
◣
1 × 2 × ⋯ × n
\overbrace
And arrow “accents”:
◂
1 × 2 × ⋯ × n
\overleftarrow
▸
1 × 2 × ⋯ × n
\overrightarrow
B.7.7 Spacing
By contrast with LATEX, space in the input matters in math mode.
One or more spaces are translated to one space.
Furthermore,
spaces after commands (such as \alpha) are echoed
except for invisible commands (such as \tt).
This allows users to control space in their formulas, output being
near to what can be expected.
Explicit spacing commands (\,, \!, \: and
\;) are recognized, the first two commands do nothing, while
the others two output one space.
B.7.8 Changing Style
Letters are italicized inside math mode and this cannot be
changed. The appearance of
other symbols can be changed using
LATEX 2є style changing commands (\mathbf, etc.).
The commands \boldmath and \unboldmath are not
recognized. Whether symbols belonging to the symbol font are affected
by style changes or not is browser dependent.
The \cal declaration and the \mathcal command (that
yield calligraphic letters in LATEX) exist. They yield red letters by
default.
Observe that this does not corresponds directly to how LATEX manage style
in math mode and that, in fact, style cannot really change in math mode.
Math style changing declarations \displaystyle and
\textstyle do nothing when HEVEA is already in the requested
mode,
otherwise they issue a warning.
This is so because HEVEA implements displayed maths as tables,
which require to be both opened and closed and introduce line breaks
in the output.
As a consequence, warnings on \displaystyle are to be taken seriously.
The commands \scriptstyle and \scriptscriptstyle
perform type size changes.
Starting with version 1.08, HEVEA offers support for style sheets
(of the CSS variant see [CSS-2]).
Style sheets provide enhanced expressiveness. For instance, it is now possible
to get “real” (whatever real means here) small caps in html, and in a
relatively standard manner. There are other, discrete, maybe
unnoticeable, similar enhancements.
However, style sheets mostly offer an additional mechanism to
customise their documents to HEVEA users. To do so, users should
probably get familiar with how HEVEA uses style sheets in the first
place.
HEVEA interest for style sheets is at the moment confined to
block-level elements (div, table, H<n>,
etc.).
The general principle is as follows: when a command or an
environment gets translated into a block-level element,
the opening tag of the block level element has a
class="name" attribute, where name is the
command or environment name.
As an example the LATEX command \subsection
is implemented with the element h3, resulting in
html output of the form:
<h3 class="subsection">
...
</h3>
By default, most styles are undefined, and default rendering of
block-level elements applies. However, some packages (such as, for
instance fancysection, see Section B.16.4) may
define them.
If you wish to change the style of section headers, loading the
fancysection package may prove appropriate (see B.16.4).
However, one can also proceed more directly, by appending new
definitions to the document style
sheet, with the command \newstyle.
For instance, here is a \newstyle to add style for subsections.
This declaration adds some style element to the
subsection class (notice the dot!):
blocks that declare to belong to the class
will show dark-blue text, some padding
(space inside the box) is added and a border will be drawn around the block.
These specification will normally affect all subsections in the document.
Given the previous style definition, the sectioning command
\subsection*{A styled subsection heading}
should yield:
A styled subsection heading
The following points are worth noticing:
To yield some effect, \newstyle commands must appear
in the document preamble, i.e. before \begin{document}.
Arguments to \newstyle commands are processed.
The hevea package defines all style sheet related
commands as no-ops. Thus, these commands do not affect
document processing by LATEX.
9.2 Changing
the style of all instances of an environment
In this very document, all verbatim environments appear over
a light green background, with small left and right margins.
This has been performed by simply issuing the following command in
the document preamble.
Observe that, in the explicit numerical color argument above, the
hash character “#” has to be escaped.
9.3 Changing the style of some instances of an environment
One can also change the style class attached to a given instance of
an environment and thus control styling of environments more precisely.
As a matter of fact, the name of the class attribute of
environment env is referred to through an indirection, by
using the command \getenvclass{env}.
The class attribute can be changed with the command
\setenvclass{env}{class}.
The \setenvclass command internally defines a command
\env@class, whose content is read
by the \getenvclass command. As a consequence, the class
attribute of environments follows normal scoping rules.
For instance, here is how to change the style of oneverbatim
environment.
{\setenvclass{verbatim}{myverbatim}
\begin{verbatim}
This will be styled through class 'myverbatim', introduced by:
\newstyle{.myverbatim}
{margin:1ex 3x;padding:1ex;
color:maroon;
background:\@getstylecolor[named]{Apricot}}
\end{verbatim}}
Observe how the class of environment verbatim is changed from
its default value to the
new value myverbatim. The change remains active until the
end of the current group (here, the “}” at the end). Then, the class
of environment verbatim is restored to its default value
— which happen to be verbatim.
This example also shows two new ways to specify colours in style
definition, with a
conventional html color name (here maroon) or as
a high-level color (see Section B.14.2), given as an argument to
the \@getstylecolor internal command
(here Apricot from the named color model).
A good way of specifying style class changes probably is by defining
new environments.
Then, we can use \begin{flashyverbatim}…
\end{flashyverbatim} to get verbatim environments style with
the intended myverbatim style class.
This text is typeset inside the environment
\emph{flashyverbatim}, and hence with the \emph{myverbatim}
style.
9.4 Which class affects what
Generally, the styling of environment env is performed through
the commands
\getenvclass{env}
and \setenvclass{env}{…},
with \getenvclass{env} producing the
default value of env.
Concretely, this means that most of the environments are styled through
an homonymous style class. Here is a non-exhaustive list of such
environments
All sectioning commands (\part, \section etc.)
output H<n> block-level elements, which are styled
through style classes named part, section, etc.
List making-environment introduce extra style classes for items.
More specifically, for list-making environments
itemize and enumerate,
li elements are styled as follows:
That is, li elements are styled as environments, the key name
being li-env.
The description, trivlist and list environments
(which all get translated into DL elements) are styled in
a similar way, internal DT and DD elements being
styles through names dt-env and
dd-env respectively.
9.5 A few examples
9.5.1 The title of the document
The command \maketitle formats the document
title within a table element, with
class title, for display. The name of the title is displayed
inside block h1, with class titlemain, while all other
information (author, date) are displayed inside block h3, with class
titlerest.
will normally produce a title in dark blue, centered in a box, with
author and date in small-caps.
Title
Date
Author
9.5.2 Enclosing things in a styled div
At the moment, due to the complexity of the task, environments
tabular and array cannot be styled as others
environments can be,
by defining an appropriate class in the preamble.
However, even for such constructs,
limited styling can be performed, by using
the divstyle environment.
The opening command \begin{divstyle}{class}
takes the name of a class as
an argument, and translates to <div class="class">.
Of course the closing command \end{divstyle} translates to
</div>.
The limitation is that the enclosed part may generate more html
blocks, and that not all style attribute defined in class class
class will apply to those inner blocks.
As an example consider the style class definition below.
The intended behaviour is to add a black border around the inner block
(with some padding), and to have maroon text over
a light brown background.
If we, for instance, enclose an itemize environment, the
resulting effect is more or less what we have expected:
\begin{divstyle}{ruled}
\begin{itemize}
\item A ruled itemize
\item With two items.
\end{itemize}
\end{divstyle}
A ruled itemize
With two items.
However, enclosing a centered
tabular environment in a divstyle{ruled} one
is less satisfactory.
\begin{divstyle}{ruled}
\begin{center}\begin{tabular}{|c|c|}
\hline \bf English & \bf French\\ \hline
Good Morning & Bonjour\\ Thank You & Merci\\ Good Bye & Au Revoir\\ \hline
\end{tabular}\end{center}
\end{divstyle}
English
French
Good Morning
Bonjour
Thank You
Merci
Good Bye
Au Revoir
In the html version of this document,
one sees that the brown background extend on all the width
of the displayed page.
This problem can be solved by introducing an extra table.
We first open an extra centered table and then only open the
divstyle environment.
\begin{center}\begin{tabular}{c}
\begin{divstyle}{ruled}
\begin{tabular}{|c|c|}
\hline \bf English & \bf French\\ \hline
Good Morning & Bonjour\\ Thank You & Merci\\ Good Bye & Au Revoir\\
\hline
\end{tabular}
\end{divstyle}
\end{tabular}\end{center}
This works because of the rules that
govern the width of html table elements, which yield
minimal width. This trick is used in
numerous places by HEVEA, for instance in document titles, and looks
quite safe.
English
French
Good Morning
Bonjour
Thank You
Merci
Good Bye
Au Revoir
Another solution is to specify the display property
of the styling div block as being inline-block:
Our idea is highlight lists with a left border whose color fades
while lists are nested.
Such a design may be appropriate for tables of content, as
the one of this document.
Part A
Chapter I
Section I.1
Section I.2
Chapter II
Section II.1
Section II.2
Chapter III
Part B
Chapter IV
Section IV.1
Section IV.1.a
Section IV.1.b
Section IV.2
Chapter V
The text above is typeset from the following LATEX source.
For simplicity, we assume a limit of four over the nesting depth of
toc environment.
We first define four style classes toc1, toc2,
toc3 and toc4 in the document preamble.
Since those classes are similar, a command \newtocstyle is
designed.
HACHA now produces an additional file: a style sheet, which is
shared by all the html files produced by HACHA.
Please refer to section 7.1 for details.
9.6.2 Producing an external style sheet
By default, style declarations defined with
\newstyle go into the header of the html document
doc.html.
However, one can send those declaration into an external style file,
whose name is doc.css.
Then, HEVEA automatically relates doc.html to
its style sheet doc.css.
To achieve this behaviour, it suffices to set the value of the boolean
register externalcss to true, by issuing the command
\externalcsstrue in the preamble of the source document.
Notice that HEVEA output still can be processed by HACHA, with
correct behaviour.
9.6.3 Linking to external style sheets
The HEVEA command \loadcssfile{url} allows the
user to link to an external style sheet (like the link option for
HTML). The command takes an url of the external
sheet as argument and emits the HTML text to
link to the given external style sheet. As an example, the command
\loadcssfile{../abc.css}
produces the following html text in the head of the document.
To yield some effect, \loadcssfile must appear in the document
preamble. Several \loadcssfile commands can be issued. Then
the given external style sheets appear in the output, following source
order.
Notice that the argument to \loadcssfile is processed. Thus, if it
contains special characters such as “#” or “$”, those must be specified
as \# and \$ respectively.
A viable alternative would be to quote
the argument using the \url command from the url
package (see Section B.17.11).
9.6.4 Limitations
At the moment, style class definitions cumulate, and appear
in the style element in the order they are given in the
document source. There is no way to cancel the default class
definitions performed by HEVEA before it starts to process the
user’s document.
Additionally, external style sheets specified with \loadcssfile
appear before style classes defined with \newstyle.
As a consequence (if I am right), styles
declared by \newstyle take precedence over those contained in
external style sheets. Thus, using external style-sheets, especially
if they alter the styling of elements, may produce awkward results.
Those limitations do not apply of course to style classes whose
names are new, since there cannot be default definitions for them.
Then, linking with external style sheets can prove useful to
promote uniform styling of several documents produced by HEVEA.
Most of the problems that occur during the translation of a given
LATEX file (say trouble.tex) can be detected and solved at
the macro-level. That is, most problems induce a macro-related warning
and can be solved by writing a few
macros. The best place for these macros is an user style file (say
trouble.hva) given as
argument to HEVEA.
# hevea trouble.hva trouble.tex
By doing so, the macros written specially for HEVEA are not
seen by LATEX. Even better, trouble.tex is not changed
at all.
A worth-mentiong alternative is inserting \usepackage{trouble}
in the document preamble. Then, given HEVEA semantics for
\usepackage (see Section B.5.2),
HEVEA-specific commands should be placed in
the file “trouble.hva” file, while LATEX-specific commands
should be placed in teh file “trouble.sty”.
Of course, adapting a document to HEVEA processing
will be easier if the LATEX source is written in a
generic style, using macros.
Note that this style is recommended anyway, since it facilitates
document maintenance.
4.1 HEVEA does not know a macro
Consider the following LATEX source excerpt:
You can \raisebox{.6ex}{\em raise} text.
LATEX typesets this as follows:
Since HEVEA does not know about \raisebox,
it incorrectly processes this input. More precisely,
it first prints a warning message:
trouble.tex:34: Unknown macro: \raisebox
Then, it goes on by translating the arguments of \raisebox as if
they were normal text. As a
consequence some .6ex is finally found in the html output:
You can .6exraise text.
To correct this, you should provide a macro that has more or less the effect of
\raisebox. It is impossible to write a generic
\raisebox macro for HEVEA, because of html limitations.
However, in this case, the effect
of \raisebox is to raise the box a little.
Thus, the first, numerical, argument to \raisebox can be
ignored in a private \raisebox macro defined in trouble.hva:
\newcommand{\raisebox}[2]{$^{\mbox{#2}}$}
Now, translating the document yields:
You can raise text a little.
Of course, this will work only when all \raisebox commands in
the document raise text a little. Consider, the following
example, where text
is both raised a lowered a little:
You can \raisebox{.6ex}{\em raise}
or \raisebox{-.6ex}{\em lower} text.
Which LATEX renders as follows:
Whereas, with the above definition of \raisebox, HEVEA produces:
You can raise
or lower text.
A solution is to add a new macro definition in the trouble.hva file:
\newcommand{\lowerbox}[2]{$_{\mbox{#2}}$}
Then, trouble.tex itself has to be modified a little.
You can \raisebox{.6ex}{\em raise}
or \lowerbox{-.6ex}{\em lower} text.
HEVEA now produces a satisfying output:
You can raise
or lower text.
Note that, for the document to remain LATEX-processable,
it should also contain the following definition for
\lowerbox:
\newcommand{\lowerbox}[2]{\raisebox{#1}{#2}}
This definition can safely be placed anywhere in trouble.tex,
since by HEVEA semantics for \newcommand (see
section B.8.1)
the new definition will not overwrite the old one.
4.2 HEVEA incorrectly interprets a macro
Sometimes HEVEA knows about a macro, but the produced html
does not look good when seen through a browser.
This kind of errors is detected while visually checking the
output.
However, HEVEA does its best to issue warnings when such situations
are likely to occur.
Consider, for instance, this definition of \blob as a small
black square.
HEVEA always translates \rule as <hr>, ignoring size
arguments.
Hence, it produces the following, wrong, output:
Blob
We may not be particularily commited to a square blob.
In that case, other small symbols would perfectly do the job
of \blob, such as a bullet (\bullet).
Thus, you may choose to give \blob a definition in
trouble.hva:
\newcommand{\blob}{\bullet}
This new definition yields the following, more satisfying output:
• Blob •
In case we do want a square blob, there are two alternatives.
We can have LATEX typeset some subparts of
the document and then to include them as images, section 6
explains how to proceed.
We can also find a square blob somewhere in the variety of Unicode
(or do I mean ISO 10646?) characters,
and define \blob as a numerical
character reference. Here, the character U+02588
seems ok.
\newcommand{\blob}{\@print@u{X2588}}
█ Blob █
However, beware that not all browsers display all of Unicode…
4.3 HEVEA crashes
HEVEA failure may have many causes, including a bug.
However, it may also stem from a wrong LATEX input.
Thus, this section is to be read before reporting a bug…
4.3.1 Simple cases: LATEX also crashes
In the following source, environments are not properly balanced:
\begin{flushright}
\begin{quote}
This is right-flushed quoted text.
\end{flushright}
\end{quote}
Such a source will make both LATEX and HEVEA choke.
HEVEA issues the following error message that shows the LATEX
environment that is not closed properly:
Thus, when HEVEA crashes, it is a good idea to check that the
input is correct by running LATEX on it.
4.3.2 Complicated cases
Unfortunately, HEVEA may crash on input that does not affect
LATEX.
Such errors usually relate to environment or group nesting.
Consider for instance the following “optimized” version of a
quoteright environment:
\newenvironment{quoteright}{\quote\flushright}{\endquote}
\begin{quoteright}
This a right-flushed quotation
\end{quoteright}
The \quote and \flushright constructs
are intended to replace
\begin{quote} and \begin{flushright},
while \endquote stands for \end{quote}.
Note that the closing \endflushright
is omitted, since it does nothing.
LATEX accepts such an input and produces a right-flushed quotation.
However, HEVEA usually translates LATEX environments to html
block-level elements and it requires
those elements to be nested properly.
Here, \quote translates to <blockquote>,
\flushright translates to <div class="flushright"> and
\endquote translates to </blockquote>.
At that point, HEVEA refuses to generate obviously
non-correct html and it crashes:
Giving up command: \@close
Giving up command: \endquote
Giving up command: \endquoteright
Giving up command: \end
./trouble.tex:7: Environment nesting error: html: 'BLOCKQUOTE' closes 'DIV'
./trouble.tex:5: Latex environment 'quoteright' is pending
Adios
Also notice that the error message above includes a backtrace showing
the call-chain of commands.
In this case, the solution is easy: environments must be opened and
closed consistently. LATEX style being recommended, one should write:
Unclosed LATEX groups ({…) are another source
of nuisance to HEVEA.
Consider the following horreur.tex file:
\documentclass{article}
\begin{document}
In this sentence, a group is opened now {\em and never closed.
\end{document}
LATEX accepts this file, although it produces a warning:
# latex horreur.tex
This is TeX, Version 3.14159 (Web2C 7.2)
...
(\end occurred inside a group at level 1)
Output written on horreur.dvi (1 page, 280 bytes).
By contrast, running HEVEA on horreur.tex yields a fatal error:
# hevea horreur.tex
Giving up command: \@raise@enddocument
Giving up command: \enddocument
Giving up command: \end
./horreur.tex:4: Environment nesting error: Latex env error: 'document' closes ''
./horreur.tex:3: Latex environment '' is pending
Adios
Thus, users should close opening braces where it belongs.
Note that HEVEA error message “Latex environment
’env’ is pending” helps a lot in locating
the brace that hurts.
4.3.3 Desperate cases
If HEVEA crashes on LATEX source (not on TEX source),
then you may have discovered a bug, or this manual is not as complete
as it should.
In any case, please report to Luc.Maranget@inria.fr.
To be useful, your bug report should include LATEX code
that triggers the bug (the shorter, the better) and mention
HEVEA version number.
Generally speaking, spaces (and single newline characters) in the
source are echoed in the output. Browser then manage with spaces and
line-breaks. Following LATEX behaviour, spaces after commands are
not echoed. Spaces after invisible commands with arguments are not
echoed either.
However this is no longer true in math mode, see
section B.7.7 on spaces in math mode.
B.3.2 Paragraphs
New paragraphs are introduced by one blank line or more.
Paragraphs are not indented. Thus the macros \indent and
\noindent perform no action.
Paragraph are rendered by p elements.
In some occasions, this technique may produce spurious paragraphs
(see 3.1.1).
B.3.3 Footnotes
The commands \footnote,
\footnotetext and \footnotemark (with or without
optional arguments) are supported.
The footnote counter exists and (re)setting it or redefining
\thefootnote should work properly.
When footnotes are issued by a combination of \footnotemark and
\footnotetext, a \footnotemark
command must be issued
first, otherwise some footnotes may get numbered incorrectly or disappear.
Footnotes appear at document end in the article style and
at chapters end in the book style.
See section 7.3.6 for a description of how footnotes are flushed.
B.3.4 Accents and special symbols
Thanks to Unicode character references, HEVEA can virtually output
any symbol.
It may happen that HEVEA does not known about a particular symbol,
that is, most of the time, HEVEA does not known about a particular
command. In that case a warning is issued to draw user attention.
Users can then choose a particular symbol amongst the recognized ones,
or as an explicit Unicode character reference (see
Section 4.2 for an example of this technique).
Commands for making accents used in non-English languages, such as
\', work when applied to accent-less (i.e. ascii)
letters and that the corresponding accented letters exist
in the Unicode character set.
Otherwise, the argument to the command is not modified
and a warning is issued.
For instance, consider the following source code, where, after a
legitimate use of acute accents, one attempt to put an accute accent
over the letter “h”:
``\'Ecole'' works as in \LaTeX, while ``\'h'' does not.
HEVEA output will be “École” works as in LATEX, while “h” does not.
And a warning will be issued.
./tmp.tex:3741: Warning: Application of '\'' on 'h' failed
Observe that using input encodings
is a convenient alternative to accent commands —
see Section B.17.4.
hevea-2.23-manual/manual.htoc 0000644 0043171 0051216 00000044175 12477067067 016220 0 ustar maranget cristal \begin{tocenv}
\tocitem \@locref{sec2}{\begin{@norefs}\@print{Part A}\quad{}Tutorial{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{getstarted}{\begin{@norefs}\@print{1}\quad{}How to get\label{getstarted} started{}\end{@norefs}}
\tocitem \@locref{sec4}{\begin{@norefs}\@print{2}\quad{}Style files{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec5}{\begin{@norefs}\@print{2.1}\quad{}Standard base styles{}\end{@norefs}}
\tocitem \@locref{sec6}{\begin{@norefs}\@print{2.2}\quad{}Other base styles{}\end{@norefs}}
\tocitem \@locref{sec7}{\begin{@norefs}\@print{2.3}\quad{}Other style files{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec10}{\begin{@norefs}\@print{3}\quad{}A note on style{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec11}{\begin{@norefs}\@print{3.1}\quad{}Spacing, Paragraphs{}\end{@norefs}}
\tocitem \@locref{sec14}{\begin{@norefs}\@print{3.2}\quad{}Math mode{}\end{@norefs}}
\tocitem \@locref{sec19}{\begin{@norefs}\@print{3.3}\quad{}Warnings{}\end{@norefs}}
\tocitem \@locref{sec20}{\begin{@norefs}\@print{3.4}\quad{}Commands{}\end{@norefs}}
\tocitem \@locref{sec21}{\begin{@norefs}\@print{3.5}\quad{}Style choices{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec22}{\begin{@norefs}\@print{4}\quad{}How to detect and correct errors{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec23}{\begin{@norefs}\@print{4.1}\quad{}\hevea{} does not know a macro{}\end{@norefs}}
\tocitem \@locref{sec24}{\begin{@norefs}\@print{4.2}\quad{}\hevea{} incorrectly interprets a macro{}\end{@norefs}}
\tocitem \@locref{sec25}{\begin{@norefs}\@print{4.3}\quad{}\hevea{} crashes{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec29}{\begin{@norefs}\@print{5}\quad{}Making \hevea{} and \LaTeX{} both happy{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec30}{\begin{@norefs}\@print{5.1}\quad{}File loading{}\end{@norefs}}
\tocitem \@locref{heveastyle}{\begin{@norefs}\@print{5.2}\quad{}The \label{heveastyle}\protect\texttt{hevea} package{}\end{@norefs}}
\tocitem \@locref{sec35}{\begin{@norefs}\@print{5.3}\quad{}Comments{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{imagen}{\begin{@norefs}\@print{6}\quad{}With\label{imagen} a little help from \LaTeX{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{image:file}{\begin{@norefs}\@print{6.1}\quad{}The \textit{image}\label{image:file} file{}\end{@norefs}}
\tocitem \@locref{sec38}{\begin{@norefs}\@print{6.2}\quad{}A toy example{}\end{@norefs}}
\tocitem \@locref{sec39}{\begin{@norefs}\@print{6.3}\quad{}Including Postscript images{}\end{@norefs}}
\tocitem \@locref{sec40}{\begin{@norefs}\@print{6.4}\quad{}Using filters{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{hacha}{\begin{@norefs}\@print{7}\quad{}Cutting\label{hacha} your document into pieces with \hacha{}{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec42}{\begin{@norefs}\@print{7.1}\quad{}Simple usage{}\end{@norefs}}
\tocitem \@locref{sec43}{\begin{@norefs}\@print{7.2}\quad{}Advanced usage{}\end{@norefs}}
\tocitem \@locref{sec49}{\begin{@norefs}\@print{7.3}\quad{}More Advanced Usage{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec64}{\begin{@norefs}\@print{8}\quad{}Generating \html{} constructs{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec65}{\begin{@norefs}\@print{8.1}\quad{}High-Level Commands{}\end{@norefs}}
\tocitem \@locref{imgsrc}{\begin{@norefs}\@print{8.2}\quad{}More on included\label{imgsrc} images{}\end{@norefs}}
\tocitem \@locref{internal}{\begin{@norefs}\@print{8.3}\quad{}Internal \label{internal}macros{}\end{@norefs}}
\tocitem \@locref{rawhtml}{\begin{@norefs}\@print{8.4}\quad{}The \texttt{rawhtml}\label{rawhtml} environment{}\end{@norefs}}
\tocitem \@locref{sec72}{\begin{@norefs}\@print{8.5}\quad{}Examples{}\end{@norefs}}
\tocitem \@locref{encodings}{\begin{@norefs}\@print{8.6}\quad{}The \label{encodings}document charset{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{style:sheets}{\begin{@norefs}\@print{9}\quad{}Support\label{style:sheets}\index{style-sheets} for style sheets{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec75}{\begin{@norefs}\@print{9.1}\quad{}Overview{}\end{@norefs}}
\tocitem \@locref{css:change:all}{\begin{@norefs}\@print{9.2}\quad{}Changing \label{css:change:all}
the style of all instances of an environment{}\end{@norefs}}
\tocitem \@locref{css:change}{\begin{@norefs}\@print{9.3}\quad{}Changing \label{css:change}the style of some instances of an environment{}\end{@norefs}}
\tocitem \@locref{whatclass}{\begin{@norefs}\@print{9.4}\quad{}Which class affects\label{whatclass} what{}\end{@norefs}}
\tocitem \@locref{sec79}{\begin{@norefs}\@print{9.5}\quad{}A few examples{}\end{@norefs}}
\tocitem \@locref{sec83}{\begin{@norefs}\@print{9.6}\quad{}Miscellaneous{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec88}{\begin{@norefs}\@print{10}\quad{}Customising \hevea{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec89}{\begin{@norefs}\@print{10.1}\quad{}Simple changes{}\end{@norefs}}
\tocitem \@locref{sec90}{\begin{@norefs}\@print{10.2}\quad{}Changing defaults for type-styles{}\end{@norefs}}
\tocitem \@locref{sec91}{\begin{@norefs}\@print{10.3}\quad{}Changing the interface of a command{}\end{@norefs}}
\tocitem \@locref{sec92}{\begin{@norefs}\@print{10.4}\quad{}Checking the optional argument within a command{}\end{@norefs}}
\tocitem \@locref{sec93}{\begin{@norefs}\@print{10.5}\quad{}Changing the format of images{}\end{@norefs}}
\tocitem \@locref{sec94}{\begin{@norefs}\@print{10.6}\quad{}Storing images in a separate directory{}\end{@norefs}}
\tocitem \@locref{imagen-source}{\begin{@norefs}\@print{10.7}\quad{}Controlling\label{imagen-source} \texttt{imagen} from document source{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{alternative}{\begin{@norefs}\@print{11}\quad{}Other \label{alternative}output formats{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec97}{\begin{@norefs}\@print{11.1}\quad{}Text{}\end{@norefs}}
\tocitem \@locref{sec98}{\begin{@norefs}\@print{11.2}\quad{}Info{}\end{@norefs}}
\end{tocenv}
\end{tocenv}
\tocitem \@locref{sec99}{\begin{@norefs}\@print{Part B}\quad{}Reference manual{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec100}{\begin{@norefs}\@print{B.1}\quad{}Commands and Environments{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec101}{\begin{@norefs}\@print{B.1.1}\quad{}Command Names and Arguments{}\end{@norefs}}
\tocitem \@locref{sec102}{\begin{@norefs}\@print{B.1.2}\quad{}Environments{}\end{@norefs}}
\tocitem \@locref{sec103}{\begin{@norefs}\@print{B.1.3}\quad{}Fragile Commands{}\end{@norefs}}
\tocitem \@locref{sec104}{\begin{@norefs}\@print{B.1.4}\quad{}Declarations{}\end{@norefs}}
\tocitem \@locref{sec105}{\begin{@norefs}\@print{B.1.5}\quad{}Invisible Commands{}\end{@norefs}}
\tocitem \@locref{sec106}{\begin{@norefs}\@print{B.1.6}\quad{}The \texttt{\char92\char92} Command{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec107}{\begin{@norefs}\@print{B.2}\quad{}The Structure of the Document{}\end{@norefs}}
\tocitem \@locref{sec108}{\begin{@norefs}\@print{B.3}\quad{}Sentences and Paragraphs{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec109}{\begin{@norefs}\@print{B.3.1}\quad{}Spacing{}\end{@norefs}}
\tocitem \@locref{sec110}{\begin{@norefs}\@print{B.3.2}\quad{}Paragraphs{}\end{@norefs}}
\tocitem \@locref{sec111}{\begin{@norefs}\@print{B.3.3}\quad{}Footnotes{}\end{@norefs}}
\tocitem \@locref{accents}{\begin{@norefs}\@print{B.3.4}\quad{}Accents\label{accents} and special symbols{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec113}{\begin{@norefs}\@print{B.4}\quad{}Sectioning{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{section:section}{\begin{@norefs}\@print{B.4.1}\quad{}\label{section:section}Sectioning Commands{}\end{@norefs}}
\tocitem \@locref{appendix}{\begin{@norefs}\@print{B.4.2}\quad{}The \label{appendix}Appendix{}\end{@norefs}}
\tocitem \@locref{sec116}{\begin{@norefs}\@print{B.4.3}\quad{}Table of Contents{}\end{@norefs}}
\tocitem \ahrefloc{no:number}{Use \hacha{}}
\end{tocenv}
\tocitem \@locref{sec118}{\begin{@norefs}\@print{B.5}\quad{}Classes, Packages and Page Styles{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec119}{\begin{@norefs}\@print{B.5.1}\quad{}Document Class{}\end{@norefs}}
\tocitem \@locref{sec120}{\begin{@norefs}\@print{B.5.2}\quad{}Packages and Page Styles{}\end{@norefs}}
\tocitem \@locref{sec121}{\begin{@norefs}\@print{B.5.3}\quad{}The Title Page and Abstract{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec122}{\begin{@norefs}\@print{B.6}\quad{}Displayed Paragraphs{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec123}{\begin{@norefs}\@print{B.6.1}\quad{}Quotation and Verse{}\end{@norefs}}
\tocitem \@locref{sec124}{\begin{@norefs}\@print{B.6.2}\quad{}List-Making environments{}\end{@norefs}}
\tocitem \@locref{sec125}{\begin{@norefs}\@print{B.6.3}\quad{}The \protect\texttt{list} and \protect\texttt{trivlist}
environments{}\end{@norefs}}
\tocitem \@locref{sec126}{\begin{@norefs}\@print{B.6.4}\quad{}Verbatim{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec127}{\begin{@norefs}\@print{B.7}\quad{}Mathematical Formulae{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec128}{\begin{@norefs}\@print{B.7.1}\quad{}Math Mode Environment{}\end{@norefs}}
\tocitem \@locref{sec129}{\begin{@norefs}\@print{B.7.2}\quad{}Common Structures{}\end{@norefs}}
\tocitem \@locref{sec130}{\begin{@norefs}\@print{B.7.3}\quad{}Square Root{}\end{@norefs}}
\tocitem \@locref{sec131}{\begin{@norefs}\@print{B.7.4}\quad{}Unicode and mathematical symbols{}\end{@norefs}}
\tocitem \@locref{sec132}{\begin{@norefs}\@print{B.7.5}\quad{}Putting one thing above/below/inside{}\end{@norefs}}
\tocitem \@locref{sec133}{\begin{@norefs}\@print{B.7.6}\quad{}Math accents{}\end{@norefs}}
\tocitem \@locref{sec134}{\begin{@norefs}\@print{B.7.7}\quad{}Spacing{}\end{@norefs}}
\tocitem \@locref{sec135}{\begin{@norefs}\@print{B.7.8}\quad{}Changing Style{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec136}{\begin{@norefs}\@print{B.8}\quad{}Definitions, Numbering{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec137}{\begin{@norefs}\@print{B.8.1}\quad{}Defining Commands{}\end{@norefs}}
\tocitem \@locref{sec138}{\begin{@norefs}\@print{B.8.2}\quad{}Defining Environments{}\end{@norefs}}
\tocitem \@locref{sec139}{\begin{@norefs}\@print{B.8.3}\quad{}Theorem-like Environments{}\end{@norefs}}
\tocitem \@locref{sec140}{\begin{@norefs}\@print{B.8.4}\quad{}Numbering{}\end{@norefs}}
\tocitem \@locref{sec141}{\begin{@norefs}\@print{B.8.5}\quad{}The \texttt{ifthen} Package{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec142}{\begin{@norefs}\@print{B.9}\quad{}Figures and Other Floating Bodies{}\end{@norefs}}
\tocitem \@locref{sec143}{\begin{@norefs}\@print{B.10}\quad{}Lining It Up in Columns{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec144}{\begin{@norefs}\@print{B.10.1}\quad{}The \protect\texttt{tabbing} Environment{}\end{@norefs}}
\tocitem \@locref{sec145}{\begin{@norefs}\@print{B.10.2}\quad{}The \texttt{array} and \texttt{tabular}
environments{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec146}{\begin{@norefs}\@print{B.11}\quad{}Moving Information Around{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{files}{\begin{@norefs}\@print{B.11.1}\quad{}\label{files}Files{}\end{@norefs}}
\tocitem \@locref{cross-reference}{\begin{@norefs}\@print{B.11.2}\quad{}Cross-References\label{cross-reference}\label{cross}{}\end{@norefs}}
\tocitem \@locref{sec149}{\begin{@norefs}\@print{B.11.3}\quad{}Bibliography and Citations{}\end{@norefs}}
\tocitem \@locref{sec151}{\begin{@norefs}\@print{B.11.4}\quad{}Splitting the Input{}\end{@norefs}}
\tocitem \@locref{sec152}{\begin{@norefs}\@print{B.11.5}\quad{}Index and Glossary{}\end{@norefs}}
\tocitem \@locref{sec153}{\begin{@norefs}\@print{B.11.6}\quad{}Terminal Input and Output{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec154}{\begin{@norefs}\@print{B.12}\quad{}Line and Page Breaking{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec155}{\begin{@norefs}\@print{B.12.1}\quad{}Line Breaking{}\end{@norefs}}
\tocitem \@locref{sec156}{\begin{@norefs}\@print{B.12.2}\quad{}Page Breaking{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec157}{\begin{@norefs}\@print{B.13}\quad{}Lengths, Spaces and Boxes{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec158}{\begin{@norefs}\@print{B.13.1}\quad{}Length{}\end{@norefs}}
\tocitem \@locref{sec159}{\begin{@norefs}\@print{B.13.2}\quad{}Space{}\end{@norefs}}
\tocitem \@locref{sec160}{\begin{@norefs}\@print{B.13.3}\quad{}Boxes{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec161}{\begin{@norefs}\@print{B.14}\quad{}Pictures and Colours{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec162}{\begin{@norefs}\@print{B.14.1}\quad{}The \texttt{picture} environment and the \texttt{graphics}
Package{}\end{@norefs}}
\tocitem \@locref{sec163}{\begin{@norefs}\@print{B.14.2}\quad{}The \texttt{color} Package{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec166}{\begin{@norefs}\@print{B.15}\quad{}Font Selection{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec167}{\begin{@norefs}\@print{B.15.1}\quad{}Changing the Type Style{}\end{@norefs}}
\tocitem \@locref{sec168}{\begin{@norefs}\@print{B.15.2}\quad{}Changing the Type Size{}\end{@norefs}}
\tocitem \@locref{sec169}{\begin{@norefs}\@print{B.15.3}\quad{}Special Symbols{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec170}{\begin{@norefs}\@print{B.16}\quad{}Extra Features{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec171}{\begin{@norefs}\@print{B.16.1}\quad{}\TeX{} macros{}\end{@norefs}}
\tocitem \@locref{sec177}{\begin{@norefs}\@print{B.16.2}\quad{}Command Definition inside Command Definition{}\end{@norefs}}
\tocitem \@locref{sec178}{\begin{@norefs}\@print{B.16.3}\quad{}Date and time{}\end{@norefs}}
\tocitem \@locref{fancysection}{\begin{@norefs}\@print{B.16.4}\quad{}Fancy \label{fancysection}sectioning commands{}\end{@norefs}}
\tocitem \@locref{winfonts}{\begin{@norefs}\@print{B.16.5}\quad{}Targeting \label{winfonts}Windows{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec181}{\begin{@norefs}\@print{B.17}\quad{}Implemented Packages{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec182}{\begin{@norefs}\@print{B.17.1}\quad{}AMS compatibility{}\end{@norefs}}
\tocitem \@locref{sec183}{\begin{@norefs}\@print{B.17.2}\quad{}The \texttt{array} and \texttt{tabularx}
packages{}\end{@norefs}}
\tocitem \@locref{calc}{\begin{@norefs}\@print{B.17.3}\quad{}The \texttt{calc}\label{calc} package{}\end{@norefs}}
\tocitem \@locref{inputenc}{\begin{@norefs}\@print{B.17.4}\quad{}Specifying \label{inputenc}the document input encoding, the \texttt{inputenc} package{}\end{@norefs}}
\tocitem \@locref{sec186}{\begin{@norefs}\@print{B.17.5}\quad{}More symbols{}\end{@norefs}}
\tocitem \@locref{commentpack}{\begin{@norefs}\@print{B.17.6}\quad{}The \texttt{comment}\label{commentpack} package{}\end{@norefs}}
\tocitem \@locref{multind}{\begin{@norefs}\@print{B.17.7}\quad{}Multiple Indexes with the \texttt{index} and
\texttt{multind}\label{multind} packages{}\end{@norefs}}
\tocitem \@locref{sec189}{\begin{@norefs}\@print{B.17.8}\quad{}``Natural'' bibliographies, the \texttt{natbib} package {}\end{@norefs}}
\tocitem \@locref{sec190}{\begin{@norefs}\@print{B.17.9}\quad{}Multiple bibliographies{}\end{@norefs}}
\tocitem \@locref{sec193}{\begin{@norefs}\@print{B.17.10}\quad{}Support for \texttt{babel}{}\end{@norefs}}
\tocitem \@locref{urlpackage}{\begin{@norefs}\@print{B.17.11}\quad{}The \label{urlpackage}\texttt{url} package{}\end{@norefs}}
\tocitem \@locref{sec198}{\begin{@norefs}\@print{B.17.12}\quad{}Verbatim text: the \texttt{moreverb} and
\texttt{verbatim} packages{}\end{@norefs}}
\tocitem \@locref{listings:package}{\begin{@norefs}\@print{B.17.13}\quad{}Typesetting \label{listings:package}computer languages: the \texttt{listings} package{}\end{@norefs}}
\tocitem \@locref{sec200}{\begin{@norefs}\@print{B.17.14}\quad{}(Non-)Multi page tabular material{}\end{@norefs}}
\tocitem \@locref{mathpartir:package}{\begin{@norefs}\@print{B.17.15}\quad{}Typesetting inference rules: the
\label{mathpartir:package} \aname{mathpartir}{\texttt{mathpartir}} package{}\end{@norefs}}
\tocitem \@locref{sec206}{\begin{@norefs}\@print{B.17.16}\quad{}The \texttt{ifpdf} package{}\end{@norefs}}
\tocitem \@locref{sec207}{\begin{@norefs}\@print{B.17.17}\quad{}Typesetting Thai{}\end{@norefs}}
\tocitem \@locref{sec208}{\begin{@norefs}\@print{B.17.18}\quad{}Hanging paragraphs{}\end{@norefs}}
\tocitem \@locref{sec209}{\begin{@norefs}\@print{B.17.19}\quad{}The \texttt{cleveref} package{}\end{@norefs}}
\tocitem \@locref{sec210}{\begin{@norefs}\@print{B.17.20}\quad{}Other packages{}\end{@norefs}}
\end{tocenv}
\end{tocenv}
\tocitem \@locref{practical}{\begin{@norefs}\@print{Part C}\quad{}Practical \label{practical}information{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec212}{\begin{@norefs}\@print{C.1}\quad{}Usage{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec213}{\begin{@norefs}\@print{C.1.1}\quad{}\hevea{} usage{}\end{@norefs}}
\tocitem \@locref{sec218}{\begin{@norefs}\@print{C.1.2}\quad{}\hacha{} usage{}\end{@norefs}}
\tocitem \@locref{sec219}{\begin{@norefs}\@print{C.1.3}\quad{}\texttt{esponja} usage{}\end{@norefs}}
\tocitem \@locref{bibhva}{\begin{@norefs}\@print{C.1.4}\quad{}\texttt{bibhva}\label{bibhva} usage{}\end{@norefs}}
\tocitem \@locref{sec223}{\begin{@norefs}\@print{C.1.5}\quad{}\texttt{imagen} usage{}\end{@norefs}}
\tocitem \@locref{sec224}{\begin{@norefs}\@print{C.1.6}\quad{}Invoking \texttt{hevea}, \texttt{hacha} and \texttt{imagen}{}\end{@norefs}}
\tocitem \@locref{makefile}{\begin{@norefs}\@print{C.1.7}\quad{}Using \label{makefile}\texttt{make}{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{browser}{\begin{@norefs}\@print{C.2}\quad{}Browser \label{browser}configuration{}\end{@norefs}}
\tocitem \@locref{sec227}{\begin{@norefs}\@print{C.3}\quad{}Availability{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec228}{\begin{@norefs}\@print{C.3.1}\quad{}Internet stuff{}\end{@norefs}}
\tocitem \@locref{sec229}{\begin{@norefs}\@print{C.3.2}\quad{}Law{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec230}{\begin{@norefs}\@print{C.4}\quad{}Installation{}\end{@norefs}}
\begin{tocenv}
\tocitem \@locref{sec231}{\begin{@norefs}\@print{C.4.1}\quad{}Requirements{}\end{@norefs}}
\tocitem \@locref{sec232}{\begin{@norefs}\@print{C.4.2}\quad{}Principles{}\end{@norefs}}
\end{tocenv}
\tocitem \@locref{sec233}{\begin{@norefs}\@print{C.5}\quad{}Other \LaTeX{} to \html{} translators{}\end{@norefs}}
\tocitem \@locref{sec234}{\begin{@norefs}\@print{C.6}\quad{}Acknowledgements{}\end{@norefs}}
\tocitem \ahrefloc{@biblio}{\refname}
\tocitem \ahrefloc{@index}{Index}
\end{tocenv}
\end{tocenv}
hevea-2.23-manual/browser.html 0000644 0043171 0051216 00000003474 12477067073 016427 0 ustar maranget cristal
Browser configuration
C.2 Browser configuration
By default, HEVEA does not anymore use the FACE=symbol
attribute to the <FONT ...> tag. As a consequence, browser
configuration is no longer needed.
HEVEA now extensively outputs Unicode entities.
This first means that HEVEA targets modern browsers with
decent unicode support, and only those.
In case your browser is recent and that you nevertheless experience display
problems on HEVEA-generated pages, see the excellent
Alan Wood’s Unicode Resources.
It may help to understand display problems and even to solve them
by configuring browsers or installing some fonts.
hevea-2.23-manual/index.html 0000644 0043171 0051216 00000007737 12477067073 016061 0 ustar maranget cristal
HEVEA User Documentation
Version 2.23
Abstract:
HEVEA is a LATEX to
html translator.
The input language is a fairly complete subset of LATEX 2є (old
LATEX style is also accepted) and the
output language is html that is (hopefully) correct with respect to
version 5 [HTML-5a, HTML-5b]
HEVEA understands LATEX macro definitions. Simple user style
files are understood with little or no modifications.
Furthermore, HEVEA customisation is done by writing LATEX code.
HEVEA is written in Objective Caml, as many lexers. It is
quite fast and flexible. Using HEVEA it is possible to translate
large documents such as manuals, books, etc. very quickly. All
documents are translated as one single html file. Then, the output
file can be cut into smaller files, using the companion program HACHA.
HEVEA can also be instructed to output plain text or info files.
This document consists in three parts, a tutorial introduction, a
reference manual and some practical information. The latter part
includes a small index.
LATEX style files are files that are not intended to produce output, but
define document layout parameters, commands, environments, etc.
2.1 Standard base styles
The base style of a LATEX document is the argument to the
\documentclass command (\documentstyle in old style).
Normally, the base style of a document defines the structure and
appearance of the whole document.
HEVEA really knows about two LATEX base styles,
article and book.
Additionally, the report base style is recognized and
considered equivalent to book and the
seminar base style for making slides is recognized and
implemented by small additions on the article style.
Base style style is implemented by an HEVEA specific
style file style.hva.
More precisely, HEVEA interprets
\documentclass{style} by attempting to load
the file style.hva (see section C.1.1.1 on where
HEVEA searches for files).
Thus, at the moment, HEVEA distribution includes the files,
article.hva, book.hva, etc.
2.2 Other base styles
Documents whose base style is not recognized by HEVEA can be
processed when the unknown base style is a derivation of a
recognized base style.
Let us assume that doc.tex uses an exotic
base style such as acmconf. Then, typing
hevea doc.tex will yield an error, since
HEVEA cannot find the acmconf.hva file:
# hevea.opt doc.tex
doc.tex:1: Warning: Cannot find file: acmconf.hva
doc.tex:1: Error while reading LaTeX: No base style
Adios
This situation is avoided by invoking HEVEA with the known
base style file article.hva as an extra argument:
# hevea article.hva doc.tex
The extra argument instructs
HEVEA to load its article.hva
style file before processing doc.tex.
It will then ignore the document base style specified by
\documentclass (or \documentstyle).
Observe that the fix above works because the acmconf and
article base styles look the same to the document
(i.e. they define the same macros).
More generally, most base styles that are neither
article nor book are in fact variations
on either two of them.
However, such styles usually provides extra macros.
If users documents use these macros, then users should also instruct
HEVEA about them (see section 4.1).
Finally, it is important to notice that
renaming a base style file style.cls into
style.hva will not work in general.
As a matter of fact, base style files are TEX and not LATEX source and
HEVEA will almost surely fail on TEX-ish input.
2.3 Other style files
A LATEX document usually loads additional style files, by using
the commands \input or \usepackage or \input.
2.3.1 Files loaded with \input
Just like LATEX, HEVEA reacts to the construct
\input{file} by loading the file
file. (if I got it right, HEVEA even follows TEX’s crazy
conventions on .tex extensions).
As it is often the case, assume that the document doc.tex has a
\input{mymacros.tex} instruction in its preamble, where
mymacros.tex gathers custom definitions.
Hopefully, only a few macros give rise to trouble: macros that performs fine
typesetting or TEXish macros.
Such macros need to be rewritten, using basic LATEX
constructs (section 4 gives examples of macro-rewriting).
The new definitions are best collected in a style file,
mymacros.hva for instance.
Then, doc.tex is to be translated by issuing the command:
# hevea mymacros.hva doc.tex
The file mymacros.hva is processed before
doc.tex (and thus before mymacros.tex).
As a consequence of HEVEA behaviour with respect to
definition and redefinition (see section B.8.1),
the macro definitions in mymacros.hva
take precedence over the ones in mymacros.tex, provided
the document original definitions (the ones in
mymacros.tex) are performed by \newcommand
(or \newenvironment).
Another situation is when HEVEA fails to process a whole
style file. Usually, this means that HEVEA crashes on that style
file.
The basic idea is then
to write a mymacros.hva style file that contains alternative
definitions for all the commands defined in mymacros.sty.
Then, HEVEA should be instructed
to load mymacros.hva and not to load mymacros.tex.
This is done by invoking hevea as follows:
# hevea mymacros.hva -e mymacros.tex doc.tex
Of course, mymacros.hva must now contain replacements for
all the useful macros of mymacro.tex.
2.3.2 Files loaded with \usepackage
As far as I know, LATEX reacts to the construct
\usepackage{name} by loading the file
name.sty.
HEVEA reacts in a similar, but different, manner, by
loading the file name.hva.
HEVEA distributions already includes quite a few .hva
implementations of famous packages (see section B.17).
When a given package (say zorglub) is not implemented, the
situation may not be as bad as it may seem first.
Hopefully, you are only using a few commands from package
zorglub, and you feel confident enough to implement
them yourself.
Then, it suffices to put your definitions in file zorglub.hva
and HEVEA will react to \usepackage{zorglub} by loading
zorglub.hva.
See section B.5.2 for the full story on \usepackage.
This document may be freely read, stored, reproduced,
disseminated, translated or quoted by any means and on any medium
provided the following conditions are met:
every reader or user of this document acknowledges that he his aware
that no guarantee is given regarding its contents, on any account, and
specifically concerning veracity, accuracy and fitness for any
purpose;
no modification is made other than cosmetic, change of representation
format, translation, correction of obvious syntactic errors, or as
permitted by the clauses below;
comments and other additions may be inserted, provided they clearly
appear as such; translations or fragments must clearly refer to an
original complete version, preferably one that is easily accessed
whenever possible;
translations, comments and other additions must be dated and their
author(s) must be identifiable (possibly via an alias);
this licence is preserved and applies to the whole document with
modifications and additions (except for brief quotes), independently
of the representation format;
whatever the mode of storage, reproduction or dissemination, anyone
able to access a digitized version of this document must be able to
make a digitized copy in a format directly usable, and if possible
editable, according to accepted, and publicly documented, public
standards;
redistributing this document to a third party requires simultaneous
redistribution of this licence, without modification, and in
particular without any further condition or restriction, expressed or
implied, related or not to this redistribution. In particular, in case
of inclusion in a database or collection, the owner or the manager of
the database or the collection renounces any right related to this
inclusion and concerning the possible uses of the document after
extraction from the database or the collection, whether alone or in
relation with other documents.
Any incompatibility of the above clauses with legal, contractual or
judiciary decisions or constraints implies a corresponding limitation
of reading, usage, or redistribution rights for this document, verbatim
or modified.
Version française : LLDD
hevea-2.23-manual/manual018.html 0000644 0043171 0051216 00000130637 12477067073 016454 0 ustar maranget cristal
HEVEA output language being html, it is normal for users to insert
hypertext constructs their documents, or to control colours.
8.1 High-Level Commands
HEVEA provides high-level commands for generating
hypertext constructs.
Users are advised to use these commands in the first place,
because it is easy to write incorrect html and that writing
html directly may interfere in nasty ways with HEVEA internals.
8.1.1 Commands for Hyperlinks
A few commands for hyperlink management and included images
are provided, all these
commands have appropriate equivalents defined by the hevea
package (see section 5.2).
Hence, a document that relies on these high-level commands
still can be typeset by LATEX, provided it loads the hevea
package.
Macro
HEVEA
LATEX
\ahref{url}{text}
make text an hyperlink to url
echo text
\footahref{url}{text}
make text an hyperlink to url
make url a footnote to text,
url is shown in typewriter font
\ahrefurl{url}
make url an hyperlink to url.
typeset url in typewriter font
\ahrefloc{label}{text}
make text an hyperlink to label inside the document
echo text
\aname{label}{text}
make text an hyperlink target with label label
echo text
\mailto{address}
make address a “mailto” link to address
typeset address in typewriter font
\imgsrc[attr]{url}
insert url as an image, attr are attributes in the
html sense
do nothing
\home{text}
produce a home-dir url both for output and links, output aspect is: “~text”
It is important to notice that all arguments
are processed.
For instance, to insert a link to
my home page, (http://pauillac.inria.fr/~maranget/index.html),
you should do something like this:
\ahref{http://pauillac.inria.fr/\home{maranget}/index.html}{his home page}
Given the frequency of ~, # etc. in urls,
this is annoying. Moreover, the immediate solution, using \verb,
\ahref{\verb" ... /~maranget/..."}{his home page}
does not work, since LATEX forbids verbatim formatting
inside command arguments.
Fortunately, the url package provides a very convenient
\url command that acts like \verb and can appear in
other command arguments
(unfortunately, this is not the full story, see section B.17.11).
Hence, provided the url package is loaded,
a more convenient reformulation of the example above is:
\ahref{\url{http://pauillac.inria.fr/~maranget/index.html}}{his home page}
Or even better:
\urldef{\lucpage}{\url}{http://pauillac.inria.fr/~maranget/index.html}
\ahref{\lucpage}{his home page}
It may seem complicated, but this is a safe way to have a
document processed both by LATEX and HEVEA.
Drawing a line between url typesetting and hyperlinks is correct,
because users may sometime want urls to be processed and some other
times not.
Moreover, HEVEA (optionally) depends on only one third party package:
url, which is as correct as it can be and well-written.
In case the \url command is undefined
at the time \begin{document} is processed, the commands
\url, \oneurl and \footurl are defined as
synonymous for
\ahref, \ahrefurl and \footahref, thereby
ensuring
some compatibility with older versions of HEVEA.
Note that this usage of \url is deprecated.
8.1.2 html style colours
Specifying colours both for LATEX and
HEVEA should be done using the color package (see
section B.14.2).
However,one can also specify text color using special type style declarations.
The hevea.sty style file
define no equivalent for these declarations, which therefore are for
HEVEA consumption only.
Those declarations follow html conventions for colours.
There are sixteen predefined colours:
Additionally, the current text color can be
changed by the declaration \htmlcolor{number},
where number is a six digit hexadecimal number specifying a
color in the RGB space. For instance, the declaration
\htmlcolor{404040}
changes font color to dark gray,
8.2 More on included images
The \imgsrc command becomes handy when one has images both in
Postscript and GIF (or PNG or JPG) format. As explained in
section 6.3, Postscript images can be included in
LATEX documents by using the \epsfbox command from the
epsf package. For instance, if screenshot.ps is an
encapsulated Postscript file, then a doc.tex document can
include it by:
\epsfbox{screenshot.ps}
We may very well also have a GIF version of the screenshot image
(or be able to produce one easily using image converting tools),
let us store it in a screenshot.ps.gif file.
Then, for HEVEA to include a link to the GIF image in its
output, it suffices
to define the \epsfbox command in the macro.hva file
as follows:
\newcommand{\epsfbox}[1]{\imgsrc{#1.gif}}
Then HEVEA has to be run as:
# hevea macros.hva doc.tex
Since it has its own definition of \epsfbox, HEVEA will
silently include a link the GIF image and not to the Postscript image.
If another naming scheme for image files is preferred, there are
alternatives.
For instance, assume that Postscript files are of the kind
name.ps, while GIF files are of the kind
name.gif.
Then, images can be included using
\includeimage{name}, where
\includeimage is a specific user-defined command:
Note that this method uses the hevea boolean register (see
section 5.2.3).
If one does not wish to load the hevea.sty file,
one can adopt the slightly more verbose definition:
When the Postscript file has been produced by
translating a bitmap file, this simple method of making a bitmap image and
using the \imgsrc command
is the most adequate.
It should be preferred over using the more automated image file
mechanism (see section 6),
which will translate the image back from
Postscript to bitmap format and will thus degrade it.
8.3 Internal macros
In this section a few of HEVEA internal macros are
described.
Internal macros occur at the final expansion stage of HEVEA and
invoke Objective Caml code.
Normally, user source code should not use them, since
their behaviour may change from one version of HEVEA to another and
because using them incorrectly easily
crashes HEVEA.
However:
Internal macros
are almost mandatory for writing supplementary base style files.
Casual usage is a convenient (but dangerous) way to finely control
output (cf. the examples in the next section).
Knowing a little about internal macros helps in understanding how
HEVEA works.
The general principle of HEVEA is that LATEX environments
\begin{env}…
\end{env} get
translated into html block-level elements <block
attributes>… </block>.
More specifically, such block level elements are opened by the
internal macro \@open and closed by the internal macro
\@close.
As a special case, LATEX groups {… }
get translated into html groups, which are shadow block-level
elements with neither opening nor closing tag.
In the following few paragraphs, we sketch the interaction of
\@open…\@close with paragraphs.
Doing so, we intend to warn users about the complexity
of the task of producing correct html, and to encourage
them to use internal macros, which, most of the time, take nasty
details into account.
Paragraphs are rendered by p elements, which are opened and
closed automatically.
More specifically, a first p is opened after
\begin{document}, then paragraph breaks close the active
p and open a new one.
The final \end{document} closes the last p.
In any occasion, paragraphs consisting only of space characters
are discarded silently.
Following html “normative reference [HTML-5a]”, block-level
elements cannot occur inside p; more precisely,
block-level opening tags implicitly close any active p.
As a consequence,
HEVEA closes the active p element when it processes
\@open
and opens a new p when it processes the matching
\@close.
Generally, no p element is opened by default inside block-level
elements, that is, HEVEA does not immediately open p after having
processed \@open.
However, if a paragraph break occurs later, then a new p
element is opened, and will be closed automatically
when the current block is closed.
Thus, the first “paragraph” inside block-level elements
that include several paragraphs is not a p element.
That alone probably prevents the consistent styling
of paragraphs with style sheets.
Groups behave differently, opening or closing them does
not close nor open p elements.
However, processing paragraph breaks inside groups involves temporarily
closing all groups up to the nearest enclosing p, closing it,
opening a new p and finally re-opening all groups.
Opening a block-level element inside a group, similarly
involves closing the active p and opening a new p
when the matching \@close is processed.
Finally, display mode (as introduced by $$) is also
complicated. Displays basically are table elements with one row
(tr), and HEVEA manages to introduce table cells (td)
where appropriate. Processing \@open inside a display
means closing the current cell, starting a new cell, opening the
specified block, and then immediately opening a new display.
Processing the matching \@close closes the internal
display, then the specified block, then the cell and finally opens a
new cell. In many occasions (in particular for groups), either cell
break or the internal display may get cancelled.
It is important to notice that primitive arguments are
processed (except for the \@print primitive, and for some of
the basic style primitives). Thus,
some characters cannot be given directly (e.g. # and
% must be given as \# and \%).
\@print{text}
Echo text verbatim. As a consequence use only ascii
in text.
\@getprint{text}
Process text using a special output mode that strips off
html tags. This macro is the one to use for processed attributes of
html tags.
\@hr[attr]{width}{height}
Output an html horizontal rule, attr is attributes given
directly (e.g. SIZE=3 HOSHADE), while width and
height are length arguments given in the LATEX style
(e.g. 2pt or .5\linewidth).
\@print@u{n}
Output the (Unicode) character “n”, which can
be given either as a decimal number or an hexadecimal number prefixed
by “X”.
\@open{block}{attributes}
Open html block-level element block with attributes
attributes. The block name blockmust be
lowercase.
As a special case block may be the empty string, then a html
group is opened.
\@close{block}
Close html block-level element block.
Note that \@open and \@close must be properly balanced.
\@out@par{arg}
If occurring inside a p element,
that is if a <p> opening tag is active,
\@out@par first closes it (by emitting </p>),
then formats arg, and then re-open a p element.
Otherwise \@out@par simply formats arg.
This command is adequate when
formatting arg produces block-level elements.
Text-level elements are managed differently. They are not seen
as blocks that must be closed explicitly.
Instead they follow a “declaration” style, similar
to the one of LATEX “text-style declarations” — namely,
\itshape, \em etc.
Block-level elements (and html groups)
delimit the effect of such declarations.
\@span{attr}
Declare the text-level element span (with given attributes)
as active.
The text-level element span will get opened as soon as
necessary and closed automatically, when the
enclosing block-level elements get closed.
Enclosed block-level elements are treated properly by closing span
before them, and re-opening span (with given attributes)
inside them.
The following text-level constructs exhibit similar behaviour with respect
to block-level elements.
\@style{shape}
Declare the
text shape shape (which must be lowercase) as active. Text
shapes are known as font style elements (i, tt, etc.;
warning:most of font style elements are depreciated in html5,
and some of them are no longer valid, prefer CSS in span tags)
or phrase elements (em, etc.) in the html terminology.
\@styleattr{name}{attr}
This command generalises both \@span and \@style,
as both a text-level element name name and attributes are specified.
More specifically,
\@span{attr} can be seen as a shorthand for
\@styleattr{span}{attr};
while
\@style{name} can be seen as
a shorthand for
\@styleattr{name}{}.
\@fontsize{int}
Declare
the text-level element span with attribute
style="font-size:font-size" as active.
The argument
int must be a small integer in the range
1,2, … , 7.
hevea computes font-size, a CSS fontsize value,
from int.
More specifically, font-size will
range from x-small to 120% included in
a xx-large, 3 being the default size medium.
Notice that \@fontsize is deprecated in favour of
\@span with proper fontsize declarations:
\@span{style="font-size=xx-small"},
\@span{style="font-size=x-small"},
\@span{style="font-size=small"},
etc.
\@fontcolor{color}
Declare the text-level element span with attribute
"style=color" as active.
The argument color must be a color attribute value in the html
style. That is either one of the sixteen conventional colours
black, silver etc, or a RGB hexadecimal color specification
of the form
#XXXXXX.
Note that the argument color is processed, as a consequence
numerical color arguments should be given as \#XXXXXX.
\@nostyle
Close active text-level declarations and ignore further text-level
declarations.
The effect stops when the enclosing block-level element is closed.
\@clearstyle
Simply close active text-level declarations.
Notice on font styling with CSS
The preferred way to style text in new versions of the html “standard”
is using style-sheet specifications. Those can be given as argument to
a “style” attributes of html elements, most noticeably
of the span elements.
For instance, to get italics in old versions of html one used
the text-level “i” element as in
<i>…</i>. Now, for the same results of getting
italics one may write:
<span style="font-style:italic">…</span>.
An indeed hevea styles text in that manner,
starting from version 2.00.
Such (verbose) declarations are then abstracted into style class declarations
by HEVEA optimiser esponja, which is invoked by hevea
when given option “-O”.
Notice that style attributes can be given to elements other than span.
However, combining style attributes requires a little care as only one style
attribute is allowed.
Namely <cite style="font-weight:bold" style="color:red">
is illegal and should be written
<cite style="font-weight:bold;color:red">.
For instance:
Das Kapital.
The command \@addtyle can be handy for adding style to
already style elements:
\@addstyle{name:val}{attrs}
Echo the space-separated attributes attrs of a tag with the
name:val style declaration added to these attributes. The
style attribute is added if necessary. Examples:
\@addstyle{color:red}{href="#"} will produce
href="#" style="color:red", and
\@addstyle{color:red}{href="#" style="font-style:italic"} will
produce href="#" style="font-style:italic;color:red". Note
that an unnecessary extra space can be added in some cases.
As an example, consider the following definition of a command
for typesetting citation in bold, written directly in html:
The purpose of the optional argument is to add style to specific citations,
as in:
Two fundamental works: \styledcite{The Holy Bible} and
\styledcite[color:red]{Das Kapital}.
We get: Two fundamental works: The Holy Bible and
Das Kapital.
Notice that the example is given for illustrating the usage of the
\@addstyle macros, which is intended for package writers.
A probably simpler way to proceed would be to use
LATEX text-style declarations:
\newcommand{styledcite}[2][]{{\@style{cite}#1\bf{}#2}}
Two fundamental works: \styledcite{The Holy Bible} and
\styledcite[\color{red}]{Das Kapital}.
We get:
Two fundamental works: The Holy Bible and
Das Kapital.
8.4 The rawhtml environment
Any text enclosed between \begin{rawhtml} and
\end{rawhtml} is echoed verbatim into the html output file.
Similarly, \rawhtmlinput{file} echoes the
contents of file file.
In fact, rawhtml is the environment counterpart of the
\@print command, but experience showed it to be much more
error prone.
When HEVEA was less sophisticated then it is now,
rawhtml was quite convenient.
But, as time went by,
numerous pitfalls around rawhtml showed up. Here are a few:
Verbatim means that no translation of any kind is performed. In
particular, be aware that input encoding (see B.17.4) does
not apply. Hence one should use ascii only, if needed
non-ascii characters can be given as
entity or numerical character references — e.g.é or é for é.
The rawhtml
environment should contain only html text that makes sense alone.
For instance, writing
\begin{rawhtml}<table>\end{rawhtml}…
\begin{rawhtml}</table>\end{rawhtml} is
dangerous, because HEVEA is not informed about opening and closing
the block-level element table. In that case, one should use
the internal macros \@open and \@close.
\begin{rawhtml}text\end{rawhtml} fragments that
contain block-level elements will almost certainly mix poorly with
p elements (introduced by paragraph breaks) and with active
style declaration (introduced by, for instance, \it).
Safe usage will most of the time means using the internal macros
\@nostyle and \@out@par.
When HEVEA is given the command-line option -O,
checking and optimisation of text-level elements in the whole document
takes place. As a consequence, incorrect html introduced by using
the rawhtml environment may be detected at a later stage,
but this is far from being certain.
As a conclusion, do not use the rawhtml environment!
A much safer option is to use the htmlonly environment
and to write LATEX code.
For instance, in place of writing:
\begin{rawhtml}
A list of links:
<ul>
<li><a href="http://www.apple.com/">Apple</a>.
<li><a href="http://www.sun.com/">Sun</a>.
</ul>
\end{rawhtml}
One can write:
\begin{htmlonly}
A list of links:
\begin{itemize}
\item \ahref{http://www.apple.com/}{Apple}.
\item \ahref{http://www.sun.com/}{Sun}.
\end{itemize}
\end{htmlonly}
If HEVEA is targeted to text or info files (see
Section 11).
The text inside rawhtml environments is ignored.
However there exists a rawtext environment (and a
\rawtextinput command) to echo text verbatim in text or info
output mode.
Additionally, the raw environment and a \rawinput
command echo their contents verbatim, regardless of HEVEA output
mode. Of course, when HEVEA produces html,
the latter environment and command suffer from
the same drawbacks as rawhtml.
8.5 Examples
As a first example of using internal macros, consider the following
excerpt from the hevea.hva file that
defines the center environment:
Notice that the code above is no longer present and is given here
for explanatory purpose only.
Now HEVEA uses style-sheets and the actual definition of the
center environment is as follows:
Basically environments \begin{center}…\end{center} will, by
default, be translated into blocks
<div class="center">…</div>.
Additionally, the style class associated to center environments
is managed through an indirection, using the
commands \setenvclass and \getenvclass.
See section 9.3 for more explanations.
Another example is the definition of the \purple
color declaration (see section 8.1.2):
\newcommand{\purple}{\@fontcolor{purple}}
HEVEA does not feature all text-level elements by default.
However one can easily use them with internal macros.
For instance this is how you can make all emphasised text blink:
Here, \@print and \@getprint are used to output
html text, depending upon whether this text requires processing or not.
Note that \@open{img}{src="#1"} is not correct,
because the element img consists in a single tag, without a
closing tag.
Another interesting example is the definition of the command
\@doaelement,
which HEVEA uses internally to output A elements.
The command \@doaelement takes two arguments: the first
argument contains the opening tag attributes; while the second element is
the textual content of the A element.
By contrast with the \imgsrc example above,
tags are emitted inside groups where styles are cancelled by using the
\@nostyle declaration.
Such a complication is needed, so as to avoid breaking proper nesting
of text-level elements.
Here is another example of direct block opening.
The bgcolor environment from the color package
locally changes background color (see section B.14.2.1).
This environment is defined as follows:
The bgcolor environment operates by opening a html table
(table) with only one row (tr) and cell (td) in
its opening command, and closing all these elements in its closing
command. In my opinion, such a style of opening block-level elements
in environment opening commands and closing them in environment
closing commands is good style.
The one cell background color is forced with a background-color
property in a style attribute.
Note that the mandatory argument to \begin{bgcolor} is the
background color expressed as a high-level color, which therefore
needs to be translated into a low-level color by using the
\@getcolor internal macro from the color package.
Additionally, \begin{bgcolor} takes html attributes
as an optional argument. These attributes are the ones of the
table element.
If you wish to output a given Unicode character whose value you know,
the recommended technique is to define an ad-hoc command
that simply call the \@print@u command.
For instance, “blackboard sigma” is Unicode U+02140 (hexa).
Hence you can define the command \bbsigma as follows:
\newcommand{\bbsigma}{\@print@u{X2140}}
Then, “\bbsigma” will output “⅀”
8.6 The document charset
According to standards, as far as I understand them, html pages are
made of Unicode (ISO 10646) characters.
By contrast, a file in any operating system is usually considered as
being made of bytes.
To account for that fact, html pages usually specify a document
charset that defines a translation from a flow of bytes to a flow of
characters.
For instance, the byte
0xA4 means Unicode 0x00A4 (¤) in the
ISO-8859-1 (or latin1) encoding, and 0x20AC (€) in
the ISO-8859-15 (or latin9) encoding.
Notice that HEVEA has no difficulty to output both symbols, in fact
they are defined as Unicode characters:
But the \@print@u command may output the specified character as
a byte, when possible, by the means of the output translator.
If not possible, \@print@u outputs a numerical character
references (for instance €).
Of course, the document charset and the output translator
must be synchronised. The command \@def@charset takes a
charset name as argument and performs the operation of specifying the
document character set and the output translator. It should occur in
the document preamble.
Valid charset names are ISO-8859-n where n is a
number in 1…15,
KOI8-R, US-ASCII (the
default),
windows-n where n is
1250, 1251, 1252 or 1257,
or macintosh, or UTF-8.
In case those charsets do not suffice, you may ask the author for
other document charsets. Notice however that document charset is not
that important, the default US-ASCII works everywhere!
Input encoding of source files is another, although
related, issue — see Section B.17.4.
If wished so, the charset can be extracted from the current
locale environment, provided this yields a valid (to HEVEA) charset name.
This operation is performed by a companion script: xxcharset.exe.
It thus suffices to launch HEVEA as:
All LATEX 2є declarations and environments for changing type style
are recognised. Aspect is rather like LATEX 2є output, but there is
no guarantee.
As html does not provide the same variety of type styles as
LATEX does.
However css provide a wide variety of font properties.
HEVEA uses generic properties, proper rendering will then depend
upon user agent.
For instance, it belongs to the user agent
to make a difference between
italics (rendered by the font style “italic”)
and slanted (rendered by the font style “oblique”).
Here is how HEVEA implements text-style declarations by default:
\itshape
font-style:italic
\slshape
font-style:oblique
\scshape
font-variant:small-caps
\upshape
no style
\ttfamily
font-family:monospace
\sffamily
font-family:sans-serif
\rmfamily
no style
\bfseries
font-weight:bold
\mdseries
no style
Text-style commands also exists, they are defined as
\mbox{\decl…}. For instance,
\texttt is defined as a command with one argument whose body is
\mbox{\ttfamily#1}.
Finally, the \emph command for emphasised text also exists,
it yields text-level em elements.
As in LATEX, type styles consists in three components:
shape, series and family.
HEVEA implements the three components by making one declaration to
cancel the effect of other declarations of the same kind.
For instance consider the following source, that exhibits shape changes:
Then, in the rendering below, “small caps shape” appears in small caps shape
only and not in italics:
italic shape slanted shape
small caps shape upright shape
Old style declarations are also recognised, they translate to
text-level elements. However, no elements are cancelled when using
old style declaration. Thus, the source
“{\sl\sc slanted and small caps}” yields “slanted”
small caps: “slanted and small caps”.
Users need probably not worry about this. However this has an
important practical consequence: to change the default rendering of
type styles, one should redefine old style declaration in order to
benefit from the cancellation mechanism. See
section 10.2 for a more thorough description.
B.15.2 Changing the Type Size
All declarations, from \tiny to \Huge are recognised.
Output is not satisfactory inside headers elements
generated by sectioning commands.
B.15.3 Special Symbols
The \symbol{num} outputs character number num
(decimal) from the Unicode character set.
This departs from LATEX, which output symbol number num in
the current font.
hevea-2.23-manual/thaihevea.htoc 0000644 0043171 0051216 00000000453 12477067073 016665 0 ustar maranget cristal \begin{tocenv}
\tocitem \@locref{sec1}{\begin{@norefs}\@print{1}\quad{}Latin/Thai Character Set{}\end{@norefs}}
\tocitem \@locref{sec2}{\begin{@norefs}\@print{2}\quad{}Thai in \LaTeX{}\end{@norefs}}
\tocitem \@locref{sec3}{\begin{@norefs}\@print{3}\quad{}Thai in \hevea{}\end{@norefs}}
\end{tocenv}
hevea-2.23-manual/manual007.html 0000644 0043171 0051216 00000044471 12477067073 016452 0 ustar maranget cristal
Making HEVEA and LATEX both happy
A satisfactory translation from LATEX to html often requires
giving instructions to HEVEA.
Typically, these instructions are macro definitions and
these instructions should not be seen by LATEX.
Conversely, some source that LATEX needs should not be processed
by HEVEA.
Basically, there are three ways to make input vary according to the
processor, file loading, the hevea package
and comments.
5.1 File loading
HEVEA and LATEX treat files differently. Here is a summary of the main
differences:
LATEX and HEVEA both load files given as arguments to
\input, however when given the option -efilename,
HEVEA does not load filename.
HEVEA loads all files given as command-line arguments.
Both LATEX and HEVEA load style files given as optional
arguments to
\documentstyle and as arguments to \usepackage,
but the files are searched by following different methods and
considering different file extensions.
As a consequence, for having a file latexonly loaded by
LATEX only, it suffices
to use \input{latexonly}
in the source and to invoke HEVEA as follows:
# hevea-elatexonly…
Having heveaonly loaded by HEVEA only is more
simple: it suffices to invoke HEVEA as follows:
# heveaheveaonly…
Finally, if one has an HEVEA equivalent style.hva
for a LATEX style file style.sty,
then one should load the file as follows:
\usepackage{style}
This will result in, LATEX loading style.sty,
while HEVEA loads style.hva.
As HEVEA will not fail in case style.hva does not
exist, this is another method for having a style file loaded by
LATEX only.
Writing an HEVEA-specific file file.hva
is the method of choice for supplying command definitions
to HEVEA only. Users can then be sure that these definitions are
not seen by LATEX and will not get echoed to the image
file (see section 6).
The file file.hva can be loaded by either
supplying the command-line argument
file.hva, or by
\usepackage{file} from inside the document.
Which method is better depends
on whether you choose to override or to replace the document
definition.
In the command-line case,
definitions from file.hva are processed before the
ones from the document and will override them, provided
the document definitions are made using \newcommand (or
\newenvironment).
In the \usepackage case, HEVEA loads file.hva
at the place where LATEX loads file.sty, hence
the definitions from file.hva replace
the definitions from file.sty in the strict sense.
5.2 The hevea package
The hevea.sty style file is intended to be loaded by LATEX
and not by HEVEA.
It provides LATEX with means to ignore or process some parts of the
document.
Note that HEVEA copes with the constructs defined in
the hevea.sty file by default.
It is important to notice that the hevea.sty style file from
the distribution is a package in LATEX 2є terms and that it
is not compatible with old LATEX. Moreover, the hevea
package loads the comment package which must be present.
Also notice that, for compatibility,
HEVEA reacts to
\usepackage{hevea} by loading its own version
of the comment package (Section B.17.6).
5.2.1 Environments for selecting a translator
HEVEA and LATEX perform the following actions on source inside
the latexonly, verblatex, htmlonly, rawhtml,
toimage and verbimage environments:
environment
HEVEA
LATEX
latexonly
ignore, \end{env}
constructs are processed (see section 5.2.2)
It is impossible to avoid the spurious space in HEVEA output
for the source above.
This extra spaces comes from the newline character that follows
\end{htmlonly}. Namely this
construct must appear in a line of its own for
LATEX to recognize it. Anyway, better control over spaces
can be achieved
by using the hevea boolean register
or comments, see sections 5.2.3
and 5.3.
Also note that environments define a scope and that style changes
(and non-global definitions) are local to them. For instance, in the
example above, “…” appears in black in html output.
However, as an exception, the environments image
and verbimage do not create scope.
It takes a little practice of HEVEA to understand why this is
convenient.
5.2.2 Why are there two environments for ignoring input?
Some scanning and analysis of source is performed
by HEVEA inside the latexonly environment, in order to
allow latexonly to dynamically occur inside other environments.
More specifically, \end{env} macros
are recognized and their env argument is tested against
the name of the environment whose opening macro \env
opened the latexonly environment.
In that case, macro expansion of \endenv is performed and
any further occurrence of \end{env’} is tested
and may get expanded if it matches a pending
\begin{env’}
construct.
This enables playing tricks such as:
\newenvironment{latexhuge}
{\begin{latexonly}\huge}
{\end{latexonly}}
\begin{latexhuge}
This will appear in huge font in \LaTeX{} output only.
\end{latexhuge}
LATEX output will be:
While there is no HEVEA output.
Since HEVEA somehow analyses input that is enclosed in the
latexonly environment,
it may choke.
However, this environment is intended to select processing by
LATEX only and might contain arbitrary source code.
Fortunately, it remains possible to have input processed by LATEX
only, regardless of what it is, by enclosing it in the
verblatex environment.
Inside this environment, HEVEA performs no other action
than looking for \end{verblatex}. As a consequence,
the \begin{verblatex} and \end{verblatex} constructs
may only appear in the main flow of text or inside the same macro body,
a bit like LATEX verbatim environment.
Relations between toimage and verbimage are similar.
Additionally, formal parameters #i are replaced by
actual arguments inside the toimage environment
(see end of section 6.3 for an example of this feature).
5.2.3 The hevea boolean register
Boolean registers are provided by the ifthen package
(see [LATEX, Section C.8.5] and section B.8.5 in this
document).
Both the hevea.sty style file
and HEVEA define the boolean register hevea.
However, this register initial value is false for LATEX
and true for HEVEA.
Thus, provided, both the hevea.sty style file and the
ifthen packages are loaded, the “purple rain” example can
be rephrased as follows:
We get:
{\ifthenelse{\boolean{hevea}}{\purple}{}purple rain, purple rain}\ldots
We get:
purple rain, purple rain…
Another choice is using the TEX-style conditional macro
\ifhevea (see Section B.16.1.4):
We get:
{\ifhevea\purple\fi purple rain, purple rain}\ldots
We get: purple rain, purple rain…
5.3 Comments
HEVEA processes all lines that start with %HEVEA, while
LATEX treats these lines as comments.
Thus, this is a last variation on the “purple rain” example:
We get
%HEVEA{\purple
purple rain, purple rain%
%HEVEA}%
\ldots
(Note how comments are placed at the end of some lines to avoid spurious spaces
in the final output.)
We get:
purple rain, purple rain…
Comments thus provide an alternative to loading the
hevea package. For user convenience, comment equivalents to
the latexonly and toimage environment are also provided:
environment
comment
equivalent
\begin{latexonly}… \end{latexonly}
%BEGIN LATEX
…
%END LATEX
\begin{toimage}… \end{toimage}
%BEGIN IMAGE
…
%END IMAGE
Note that LATEX, by ignoring comments, naturally performs the action
of processing text between %BEGIN… and %END… comments. However, no environment is opened and closed and no scope is
created while using comment equivalents.
HEVEA understands command definitions given in LATEX style. Such
definitions are made using
\newcommand, \renewcommand and \providecommand.
These three constructs accept the same arguments and have the same
meaning as in LATEX, in particular it is possible to define an user
command with one optional argument.
However, HEVEA is more tolerant: if command
name already exists, then a subsequent \newcommand{name}…is ignored. If macro name does not exists, then
\renewcommand{name}…performs a definition of name. In both cases, LATEX would crash, HEVEA just issues
warnings.
The behaviour of \newcommand allows to shadow document
definition, provided the new definitions are processed before the
document definitions.
This is easily done by grouping the shadowing definition in a
specific style file given as an argument to HEVEA (see section 5.1).
Conversely, changes of base macros (i.e. the ones that HEVEA
defines before loading any user-specified file) must be performed
using \renewcommand.
Scoping rules apply to macros, as they do in LATEX.
Environments and groups define a scope and command definition
are local to the scope they occur.
It is worth noticing that HEVEA also partly implements TEX definitions
(using \def) and bindings (using \let), see
section B.16.1 for details.
B.8.2 Defining Environments
HEVEA accepts environment definitions and redefinitions
by \newenvironment and \renewenvironment.
The support is complete and should conform
to [LATEX, Sections C.8.2].
Environments define a scope both for commands and environment
definitions.
B.8.3 Theorem-like Environments
New theorem-like environments can also be introduced and redefined,
using \newtheorem and \renewtheorem.
Note that, by contrast with plain environments definitions,
theorem-like environment definitions are global definitions.
B.8.4 Numbering
LATEX counters are (fully ?) supported.
In particular, defining a counter cmd with
\newcounter{cmd} creates a macro
\thecmd that outputs the counter value.
Then the \thecmd command can be redefined.
For instance, section numbering can be turned into alphabetic style by:
\renewcommand{\thesection}{\alph{section}}
Note that TEX style for counters is not supported at all and that using
this style will clobber the output. However, HEVEA implements
the calc package that makes using TEX style for counters
useless in most situations (see section B.17.3).
B.8.5 The ifthen Package
The ifthen package is partially supported.
The one unsupported construct is the
\lengthtest test expression, which is
undefined.
As a consequence, HEVEA accepts the following example from the
LATEX manual:
Additionally, a few boolean registers are defined by HEVEA.
Some of them are of interest to users.
hevea
Initial value is true.
The hevea.sty style file also defines this register with
initial value false.
mmode
This register value reflects HEVEA operating
mode, it is true in math-mode and false otherwise.
display
This register value reflects HEVEA operating
mode, it is true in display-mode and false otherwise.
footer
Initial value is true.
When set false, HEVEA does not insert its footer “This
document has been translated by HEVEA”.
Finally, note that HEVEA also recognised à la TEX conditional
macros (see section B.16.1.4). Such macros are fully compatible
with the boolean registers of the ifthen package, as it is
the case in LATEX.
B.14.1 The picture environment and the graphics
Package
It is possible to have pictures and graphics processed by
imagen (see section 6.1).
In the case of the picture environment
it remains users responsibility to explicitly choose
source chunks that will get rendered as images.
In the case of the commands from the graphics package,
this choice is made by HEVEA.
Users should enclose all picture elements in a toimage
environment (or inside %BEGIN IMAGE… %END IMAGE comments) and insert an \imageflush command, where they want
the image to appear in html output:
This will result in normal processing by LATEX and image inclusion
by HEVEA:
All commands from the graphics package are implemented using the
automatic image inclusion feature.
More precisely, the outermost invocations of
the \includegraphics, \scalebox,
etc. commands are sent to the image image file and there will
be one image per outermost invocation of these commands.
For instance, consider a document doc.tex that
loads the graphics package and that includes some (scaled)
images by:
yields html that basically consists in three image links,
the images being generated by imagen.
Since the advent of pdflatex,
using \includegraphics to insert bitmap images
(e.g..gif or .jpg)
became frequent.
In that case, users are advised not to use HEVEA default
implementation of the graphics package.
Instead, they may use a simple variation of
the technique described in Section 8.2.
B.14.2 The color Package
HEVEA partly implements the color package.
Implemented commands are \definecolor, \color,
\colorbox,
\textcolor, \colorbox and \fcolorbox.
Other commands do not exist.
At startup,
colours black, white,
red, green, blue,
cyan, yellow and magenta are
pre-defined.
Colours are defined by
\definecolor{name}{model}{spec},
where name is the color name, model is the color
model used, and spec is the color specification according to
the given model.
Defined colours are used by the declaration
\color{name} and by the command
\textcolor{name}{text}, which
change text color.
Please note that, the \color declaration
accepts color specifications directly
when invoked as
\color[model]{spec}.
The \textcolor command has a similar feature.
As regards color models, HEVEA implements the rgb,
cmyk, hsv and hls color models.
In those models, color specifications are floating point numbers less
than one.
For instance, here is the definition for the red color:
\definecolor{red}{rgb}{1, 0, 0}
The named color model is also supported, in this model color
specification are just names…
Named colours are the ones of dvips.
Colours should be used carefully. Too many colours
hinders clarity and some of the colours may not be readable on the
document background color.
B.14.2.1 The bgcolor environment
With respect to the LATEX color package, HEVEA features
an additional
bgcolor environment, for changing the background color of some
subparts of the document.
The bgcolor environment is a displayed environment and it
normally starts a new line.
Simple usage is \begin{bgcolor}{color}…
\end{bgcolor}, where
color is a color defined with \definecolor.
Hence the following source yield a paragraph with a red background:
\begin{bgcolor}{red}
\color{yellow}Yellow letters on a red backgroud
\end{bgcolor}
Yellow letters on a red background
The bgcolor environment is implemented by one-cell
table element, it takes an
optional argument that is used as an attribute for the inner td
element (default value is style="padding:1em").
Advanced users may change the default, for instance as:
\begin{bgcolor}[style="padding:0"]{yellow}
\color{red}Red letters on a yellow backgroud
\end{bgcolor}
The resulting output will be red letters
on a yellow background and no padding:
Red letters on a yellow background, no padding
B.14.2.2 From High-Level Colours to Low-Level Colours
High-level colours are color names
defined with \definecolor.
Low-level colours are html-style colours.
That is, they are either one of the sixteen conventional colours black,
silver etc., or a RGB hexadecimal color specification of the form
"#XXXXXX".
One changes the high-level high-color into a low-level color by
\@getcolor{high-color}.
Low-level colours are appropriate inside html attributes and as
arguments to the \@fontcolor internal macro.
An example of \@getcolor usage can be found at the end of
section 8.5.
There is also \@getstylecolor command that acts
like\@getcolor, except that it does not output the double
quotes around RGB hexadecimal color specifications.
Such low-level colours are appropriate for style definitions in
cascading style sheets [CSS-2]. See
Section 9.3 for an example.
hevea-2.23-manual/manual005.png 0000644 0043171 0051216 00000005104 12477067071 016254 0 ustar maranget cristal PNG
IHDR
mh $iCCPicc xڕgPY<@BPC*%Z(ҫ@PEl+4EQ@U)VD((bA7"Wy?g= 8X'& 영ALi) OO7z? xo"DDX3+=e/1=<+]fRK|cלo,]z
){T8بlOrTzV $G&DPJGf/GnrAltL:5204gk!FgY߽z س {{ t @wOm| :3<@t *K` | d\
"U4&
NNp \mp '@&+ <AX H Rt #
YC
AP4e@v*: :]nB#h >Ll¾Z8Ns|x7\'
| +xa ʈ.FD!d3R#H+ҍ!!2|DaP4D9P|T*j3U:@P"4-A[y@t4: ].G7 { 0fgL&S9i\ b1X,Vz`ðl%v;#pF8G\0. +5.py8^ oG7K
n ~ A`86Bp0JxK$UD/b,q+xx8FHI\R)ttL&kmtnr*MLO'!EZClH5OQp((9r ʌ8^\C+ &YZMPC"QXYKՠ:P##ԫqBSqi|vZm@IR%%%%%/H
Cc$0J8RRZm# ۤ?0e det
L[MBjFt'} mngG StYZ[6[Nb\հjJ*̪Jhʹ>l-Q ynjah;qNp^ M}ϡᙣccieg^k\\6\}\\i ܺaw}W' <} O=Yza<^xzz|4-}Oo (
n
$
n ]fkYk\'.a݅aτCBC*6,b:*4r2*4j**z_tMLyL,7*Ms\m\GńD\bh$jR|Robrv`NJA0"uH*hL֦uӗ> ͌ c֙ՙ dKd'eoްkdcэ=ʹr6q6m6o٢%VǷo- 4
[w8h)+Y؟vUKaD"b~
yqwӒC{0{} e̲²wYn\^{p 〰RrOBULp]u[|ͮ jU-t8:z##G^47 e mjm,j|,&f%eDȉ'Ovֵ1ڊNS^˃Ӯ{ΰϴU?[Nk/:6t:c:]A]\t[v/H^(HqRΥ)gD_Yj^\ݸxj
oZÃ < >x8(ћǙl E>ZLYZ M<2 G //'&O;N}īW3JYZٿl&,]Vwzf=gO|??WA}>Mg-`*>k}et1qq?.r)ԕ PLTE # iXo tRNS @f pHYs a a?i IDATc` > @! 0 X %tEXtdate:create 2015-03-08T16:43:53+01:00F4_ %tEXtdate:modify 2015-03-08T16:43:53+01:007X tEXtSoftware GPL Ghostscript 9.05] IENDB` hevea-2.23-manual/thaihevea.html 0000644 0043171 0051216 00000027621 12477067102 016673 0 ustar maranget cristal
How to Use HEVEA with the Thai Character Set
How to Use HEVEA with the Thai Character Set
Andrew Seagar and นิตยา ซีการ์
email: dr_andrew_seagar@ieee.org
1 Latin/Thai Character Set
Thai LATEX is written in the TIS-620 character encoding. Some
people call this ISO-8859-11, but that name was (for a long time)
never officially recognised.
The TIS-620 character encoding is an 8-bit single byte character set.
It encodes both the ASCII Latin characters (0-127) and the Thai
characters (128-255). See, for the official Thai definition, the
docuemnt:
“ISO 8859-11 Latin/Thai Character Set standard”
at the
website: www.nectec.or.th/it-standards/iso8859-11/
Non-Thai variations to the official Thai character set were introduced
by some vendors. The Windows Thai character set (874) places
an unofficial ‘smart quote’ character into one of the empty (illegal)
slots in the official Thai set. The DEC (Digital Equipement
Coorporation) character set places an unofficial ‘no-break space’
character into another of the empty (illegal) slots in the
original official Thai set. It is not too clear what is now
“official” and what is not. It is necessary to be a little bit
careful. Importing “Thai” docuemnts from Windows into a
Linux environment via (for example) Openoffice doesn’t always
produce a faithful copy of the original text.
Figure 1 shows the Thai characters according to the
Unicode Standard (version 3.0).
2 Thai in LATEX
For Thai in LATEX the package ‘thai’ (file: thai.sty) is used,
i.e.\usepackage{thai}.
The source is run through a preprocessor (cttex) to encapsulate all
Thai text within bracketted pairs {\thai ....} and to insert
the thai-break ‘\tb’ separator.
Normally Thai text is written in a continuous stream with few (if any)
blank (space) characters. The preprocessor inserts the ‘\tb’
command to indicate places where the text may be broken if near the
end of a line. If these separators are not inserted LATEX has a
great deal of trouble in getting a flush right margin without leaving
huge gaps in the text.
The style file ‘thai.sty’ contains the definitions for {\thai ....}
and \tb. The {\thai ....} command is used to switch the
LATEX font.
After passing through the preprocessor, the file is compiled by
LATEX in the normal fashion.
3 Thai in HEVEA
For HEVEA the style (package) file ‘thai.sty’ is not used. HEVEA
does not recognise the {\thai ....} or \tb constructs.
If these constructs are encountered, warnings will be issued and the
constructs will be ignored.
In order to use the Thai language with HEVEA, the preprocessor which
is normally used before invoking LATEX should not be used.
The original (as typed) Thai LATEX file should be passed directly to
HEVEA. The command \usepackage{thai} in the file is detected
by HEVEA and is used to establish a Thai character encoding. (It is
no longer necessary to use the command line flag –charset=TIS-620.
This flag is no longer operational).
The commands required to process this file for both Thai LATEX and
Thai HEVEA are listed in table 1. The original LATEX
filename is assumed to be ‘thaihevea.ttex’ (ttex = Thai tex).
for LATEX
cttex < thaihevea.ttex > thaihevea.tex
run preprocessor
latex thaihevea.tex
compile using LATEX
dvips thaihevea.dvi -o
convert using dvips
gv thaihevea.ps
view using ghostview
for HEVEA
cp thaihevea.ttex thaihevea.tex
‘rename’ file for benefit of HEVEA
hevea thaihevea.tex
compile using HEVEA
imagen thaihevea
convert image to bitmap
firefox thaihevea.html
view using web browser
Table 1: Processing Thai text with LATEX and HEVEA.
Since the Thai text is not processed to indicate where the text may be
broken, the decision is left to the application displaying the html
code. The browser I currently use (Firefox) doesn’t know how to break
continuous Thai text in suitable places without external help.
However the screen width is larger than a page width, which means that
on average there are more natural breaks in any line, and the browser
is left justifying the text so it doesn’t make large ugly gaps. The
right margin is ragged, not flush, but that looks acceptable (to me).
Following is a paragraph of Thai text. It doesn’t say anything
important, it is simply here to serve as a basic test. Even if you
can’t compile this with LATEX (e.g. you don’t have the
file thai.sty or a Thai character set for printing), you can still
compile it with HEVEA and make an English/Thai web page.
If you want to eliminate the Thai so you can compile an English-only
version of this document, simply insert a comment % character before
the \thaistuff command at the top of the file and uncomment the
second version of the command (which eliminates the Thai) on the
adjacent line.
All length commands are ignored, things go smoothly when LATEX syntax is
used (using the \newlength, \setlength, etc. commands,
which are null macros).
Of course, if lengths are really important to the document, rendering
will be poor.
Note that TEX length syntax is not at all recognised. As a
consequence, writing things like \textwidth=10cm will clobber
the output.
Users can correct such misbehaviour by adopting LATEX syntax, here
they should write
\setlength{\textwidth}{10cm}.
B.13.2 Space
The \hspace, \vspace and \addvspace spacing
commands and their starred versions recognise positive explicit length
arguments. Such arguments get converted to a number of non-breaking
spaces or line breaks.
Basically, the value of 1em or 1ex is one space or one
line-break. For other length units, a simple conversion based upon a
10pt font is used.
HEVEA cannot interpret more complicated length arguments
or perform negative spacing.
In these situations, a warning is issued and no output is done.
Spacing commands without arguments are recognised.
The \enspace, \quad and \qquad commands output
one, two and four non-breaking spaces, while the \smallskip,
\medskip and \bigskip output one, one, and two line
breaks.
Stretchable lengths do not exist, thus the \hfill and
\vfill macros are undefined.
B.13.3 Boxes
Box contents is typeset in text mode (i.e. non-math and non-display
mode).
Both LATEX boxing commands \mbox and \makebox
commands exist.
However \makebox generates a specific warning, since HEVEA
ignore the length and positioning instructions given as optional
argument.
Similarly, the boxing with frame \fbox and \framebox
commands are recognised and
\framebox issues a warning.
When in display mode, \fbox frames its argument by
enclosing it in a
table with borders. Otherwise, \fbox calls the \textfbox
command, which issues a warning and typesets its argument
inside a \mbox (and thus no frame is drawn).
Users can alter the behaviour of \fbox in non-display mode by
redefining \textfbox.
Boxes can be saved for latter usage by storing them in bins.
New bins are defined by \newsavebox{cmd}.
Then some text can be saved into cmd by
\sbox{cmd}{text} or
\begin{lrbox}{cmd}text\end{lrbox}.
The text is translated to html, as if it was inside a \mbox
and the resulting output is stored.
It is retrieved (and outputted) by the command
\usebox{cmd}.
The \savebox command reduces to \sbox, ignoring its
optional arguments.
The \rule commands translate to a html horizontal rule
(<HR>) regardless of its arguments.
This section describes HEVEA functionalities that extends on plain LATEX,
as defined in [LATEX].
Most of the features described here are performed by default.
B.16.1 TEX macros
Normally, HEVEA does not recognise constructs that are specific to
TEX.
However, some of the internal commands of HEVEA are homonymous to
TEX macros, in order to enhance compatibility.
Note that full compatibility with TEX is not guaranteed.
B.16.1.1 À la TEX macros definitions
The \def construct for defining commands is supported.
It is important to
notice that HEVEA semantics for \def
follows TEX semantics.
That is, defining a command that already
exists with \def succeeds.
Delimiting characters in command definition are somehow supported.
Consider the following example from the TEX Book:
Please note that delimiting characters are supported as far as I
could, problems are likely with delimiting characters which include
spaces or command names, in particular the command name \{.
One can include \{ in a command argument by using the grouping
characters {… }:
\def\frenchquote(#1){\guillemotleft~\emph{#1}~\guillemotright{} (in French)}
he said \frenchquote(Alors cette accolade ouvrante {``\{''}~?).
Yields:
he said « Alors cette accolade ouvrante “{” ? » (in French).
Another issue regards comments: “%” in arguments may give undefined
behaviours, while comments are better avoided while defining
macros. As an example, the following code will not
be handled properly
by HEVEA:
\def\x%
#1{y}
Such TEX source should be rewritten as \def\x#1{y}.
Another source of incompatibility with TEX is that substitution of
macros parameters is not performed at the same moment by HEVEA and
TEX.
However, things should go smoothly at the first level of macro
expansion, that is when the delimiters
appear in source code at the same level as the macro that is to
parse them.
For instance, the following source will give different results in
LATEX and in HEVEA:
LATEX output is “coucou”A, while HEVEA output is “coucouA”.
Here is HEVEA output:
“coucouA”
Please note that in most situations this discrepancy will make
HEVEA crash.
B.16.1.2 The \let construct
HEVEA also processes a
limited version of \let:
\letmacro-name1 = macro-name2
The effect is to bind macro-name1 to whatever macro-name2
is bound to at the time \let is processed. This construct may
prove very useful in situations where
one wishes to slightly modify basic commands.
See sections 10.3 and B.2 for examples of using
\let in such a situation.
B.16.1.3 The \global construct
It is possible to escape scope and to make global definitions
and bindings by using the TEX construct \global.
The \global construct is significant before
\def and \let constructs.
Also note that \gdef is equivalent to \global\def.
B.16.1.4 TEX Conditional Macros
The \newif\ifname, where name is made of letters
only, creates three macros:
\ifname, \nametrue and
\namefalse.
The latter two set the name condition to true and
false, respectively.
The \ifname command tests the condition name:
\ifname
text1 \else text2 \fi
Text text1 is processed when name is
true, otherwise text2 is processed.
If text2 is empty, then the \else keyword can be
omitted.
Note that HEVEA also implements LATEX ifthen package
and that TEX simple conditional macros are fully compatible with
LATEX boolean registers. More precisely,
we have the following correspondences:
TEX
LATEX
\newif\ifname
\newboolean{name}
\nametrue
\setboolean{name}{true}
\namefalse
\setboolean{name}{false}
\ifname text1\elsetext2\fi
\ifthenelse{\boolean{name}}{text1}{text2}
B.16.1.5 Other TEX Macros
HEVEA implements the macros \unskip and \endinput.
It also supports the \csname… \endcsname
construct.
If one strictly follows the LATEX manual, only commands with no
arguments can be defined inside other commands.
Parameters (i.e.#n) occurring inside command bodies
refer to the outer definition, even when they appear in nested
command definitions.
That is, the following source:
Nevertheless, nested commands with arguments are allowed.
Standard parameters #n still refer to the outer
definition, while nested parameters ##n refer to the
inner definition.
That is, the source:
Date and time support is not enabled by default, for portability and
simplicity reasons.
However, HEVEA source distribution includes a simple (sh)
shell script
xxdate.exe that activates date and time support.
The hevea command, should be invoked as:
# hevea -exec xxdate.exe ...
This will execute the script xxdate.exe, whose output is then
read by HEVEA.
As a consequence, standard LATEX counters year,
month, day and
time are defined and
LATEX command \today works properly.
Additionally the following counters and commands are defined:
Output of the date Unix
command, (e.g. Sun Mar 8 16:43:49 CET 2015)
Note that I chose to add an extra option (and not an extra
\@exec primitive) for security reasons. You certainly do
not want to enable HEVEA to execute silently an arbitrary program
without being conscious of that fact.
Moreover, the hevea program does not execute
xxdate.exe by default since it is difficult to write such
a script in a portable manner.
Windows users should enjoy the same features with the version of
xxdate.exe included in the Win32 distribution.
B.16.4 Fancy sectioning commands
Loading the fancysection.hva file will radically change the
style of sectional units headers: they appear over a green
background, the background color saturation decreases as the sectioning
commands themselves do (this is the style of this manual).
Additionally, the document background color is white.
Note : Fancy section has been re-implemented using style-sheets. While it respects the old behaviour, users are encouraged to try out style-sheets for more flexibility. See Section 9 for details.
The fancysection.hva file is intended to be loaded after
the document base style.
Hence the easiest way to load the fancysection.hva file
is by issuing \usepackage{fancysection} in the document preamble.
To allow processing by LATEX, one may for instance create
an empty fancysection.sty file.
As an alternative, to use fancy section style in
doc.tex whose base style is article
you should issue the command:
# hevea article.hva fancysection.hva doc.tex
You can also make a doc.hva file that contains the two lines:
\input{article.hva}
\input{fancysection.hva}
And then launch hevea as:
# hevea doc.hva doc.tex
Sectioning command background colours can be changed by
redefining the corresponding colours (part, chapter,
section,…).
For instance, you get various mixes of red and orange by:
will yield sectional headers on a red-orange background.
HEVEA distribution features another style for fancy sectioning commands:
the undersection package provides underlined sectional headers.
B.16.5 Targeting Windows
At the time of this release, Windows support for symbols
through Unicode is not as complete as the one of Linux, which I am
using for testing HEVEA.
One of the most salient shortcomings is the inability to display sub-elements
for big brackets, braces and parenthesis, which HEVEA normally
outputs when it processes \left[, \right\} etc.
We (hopefully) expect Windows fonts to display more of
Unicode easily in a foreseeable future. As a temporary fix, we provide
a style file winfonts.hva.
Authors concerned by producing pages that do not look too ugly
when viewed through Windows browsers are thus advised to
load the file winfonts.hva.
For instance they can invoke HEVEA as:
# hevea winfonts.hva ...
At the moment, loading winfonts.hva
only changes the rendering
of LATEX big delimiters, avoiding the troublesome Unicode entities.
As an example, here are some examples of rendering.
delimiters
default
winfonts
\left\{ … \right\}
⎧
⎪
⎨
⎪
⎩
1
2
3
⎫
⎪
⎬
⎪
⎭
/
|
<
|
\
1
2
3
\
|
>
|
/
\left[ … \right]
⎡
⎢
⎢
⎣
1
2
3
⎤
⎥
⎥
⎦
1
2
3
\left( … \right)
⎛
⎜
⎜
⎝
1
2
3
⎞
⎟
⎟
⎠
/
|
|
\
1
2
3
\
|
|
/
\left\vert … \right\vert
⎪
⎪
⎪
⎪
1
2
3
⎪
⎪
⎪
⎪
1
2
3
\left\Vert … \right\Vert
⎪⎪
⎪⎪
⎪⎪
⎪⎪
1
2
3
⎪⎪
⎪⎪
⎪⎪
⎪⎪
1
2
3
More generally, it remains authors responsibility to be careful not to
issue too refined Unicode entities. To that aim, authors that target
a wide audience should first limit themselves to the most common
symbols (e.g. use \leq [≤]
in place of \preceq [≼]) and, above all,
they should control the rendering of their documents using several browsers.
HEVEA outputs a single .html file. This file can be
cut into pieces at various sectional units by HACHA
7.1 Simple usage
First generate your html document by applying HEVEA:
# hevea doc.tex
Then cut doc.html into pieces by the command:
# hacha doc.html
This will generate a simple root file
index.html.
This root file holds document title, abstract and a simple table of
contents.
Every item in the table of contents contains a link to or into a file
that holds a “cutting” sectional unit.
By default, the cutting sectional unit is section in the
article style and chapter in the book
style.
The name of those files are doc001.html,
doc002.html, etc.
Additionally, one level of sectioning below the cutting unit
(i.e. subsections in the article style and sections in the
book style) is shown
as an entry in the table of contents.
Sectional units above the cutting section (i.e. parts in both
article and book styles) close the current table
of contents and open a new one.
Cross-references are properly handled, that is, the local links generated by
HEVEA are changed into remote links.
The name of the root file can be changed using the
-o option:
# hacha -o root.html doc.html
Some of HEVEA output get replicated in all the files generated by
HACHA.
Users can supply a header and a footer, which will appear at the
begining and end of every page generated by HACHA. It suffices to
include the following commands in the document preamble:
\htmlhead{header} \htmlfoot{footer}
HACHA also makes every page it generates a clone of its input as
regards attributes to the <body ...> opening tag and
meta-information from the <head>… <\head>
block. See section B.2 for examples of this replication
feature.
By contrast, style information specified in the style elements
from rom the <head>… <\head>
block is not replicated. Instead, all style definitions are collected into an
external style sheet file whose name is doc.css,
and all generated html files adopt doc.css as
an external style sheet.
It is important to notice that, since version 1.08, HEVEA produces
a style element by itself, even if users do not explicitely
use styles. As a consequence,
HACHA normally produces a
file doc.css, which should not be forgotten while
copying files to their final destination after a run of HACHA.
7.2 Advanced usage
HACHA behaviour can be altered from the document source, by using
a counter and a few macros.
A document that explicitly includes cutting macros still can be typeset by
LATEX, provided it loads the
hevea.sty style file from the HEVEA distribution.
(See section 5 for details on this style file).
An alternative to loading the hevea package is to put
all cutting instructions in comments starting with %HEVEA.
7.2.1 Principle
HACHA recognizes all sectional units, ordered as follows, from
top to bottom: part, chapter,
section, subsection, subsubsection,
paragraph and subparagraph.
At any point between \begin{document} and
\end{document},
there exist a current cutting sectional unit (cutting unit for short),
a current cutting depth, a root file and an output file.
Table of contents output goes to the root file, normal output goes to
the output file.
Cutting units start a new output file, whereas units comprised between the
cutting unit and the cutting units plus the cutting depth add new
entries in the table of contents.
At document start, the root file and the output file are HACHA
output file (i.e.index.html).
The cutting unit and the cutting depth are set to default values that
depend on the document style.
7.2.2 Cutting macros
The following cutting instructions are for use in the document
preamble. They command the cutting scheme of the whole document:
\cuttingunit
This is a macro that holds the document cutting unit. You can change
the default (which is section in the article style
and chapter in the book style) by doing:
\renewcommand{\cuttingunit}{secname}.
\tocnumber
Instruct HEVEA to put section numbers
into table of content entries.
\notocnumber
Instruct HEVEA not to put
section numbers
into table of content entries. This is the default.
cuttingdepth
This is a counter that holds the document cutting depth.
You can change the default value of 1 by doing
\setcounter{cuttingdepth}{numvalue}.
A cutting depth of zero means no other entries than the cutting units
in the table of contents.
Other cutting instructions are to be used after
\begin{document}. They all generate html comments in HEVEA
output.
These comments then act as instructions to HACHA.
\cuthere{secname}{itemtitle}
Attempt a cut.
If secname is the current cutting unit or
the keyword now, then
a new output file is started and an entry in the current table of contents
is generated, with title itemtitle. This entry holds a link
to the new output file.
If secname is above the cutting unit, then the
current table of contents is closed. The output file is set to the
current root file.
If secname is below the cutting unit and less than the
cutting depth away from it, then an entry is added in the table of
contents.
This entry contains itemtitle and a link to the point where
\cuthere appears.
Otherwise, no action is performed.
\cutdef[depth]{secname}
Open a new table of contents, with cutting depth depth and
cutting unit secname. If the optional depth is absent,
the cutting depth does not change.
The output file becomes the root file.
Result is unspecified if whatever secname expands to is
a sectional unit name above
the current cutting unit, is not a valid sectional unit name or if
depth does not expand to a small positive number.
\cutend
End the current table of contents. This closes the scope of the
previous \cutdef. The cutting unit and cutting depth are
restored.
Note that \cutdef and \cutend must be properly balanced.
Commands \cuthere and \cutend have starred variants,
which behave identically except for footnotes (see 7.3.6).
Default settings work as follows:
\begin{document} performs
\cutdef*[\value{cuttingdepth}]{\cuttingunit}
and \end{document} performs \cutend*.
All sectioning commands perform \cuthere,
with the sectional unit name as first argument and the (optional, if
present) sectioning
command argument (i.e. the section title) as second argument.
Note that starred versions of the sectioning commands also perform
cutting instructions.
7.2.3 Table of links organisation
A table of links generated by HACHA is a list
of links to generated files.
Additionally, some sublists may be present, up to a certain depth.
The items in those sublists are
links inside generated files, they point to sectional unit titles
below the cutting unit, up to a certain depth.
More precisely, let A be a certain sectional unit (e.g.
“part”), let B be just below A
(e.g. “section”),
and let C be just below C (e.g. “subsection”).
Further assume that cutting is performed at level B with a depth of
more than one.
Then, every unit A holds a one or several tables of links
to generated files, and each generated file normally holds a B unit.
Sublists with links to C units inside B units normally appear in the
tables of links of level A.
The command-line options -tocbis
and -tocter instruct hacha
to put sublists at other places.
With -tocbis sublists are duplicated at the beginning
of the B level files; while with -tocter sublist only
appear at the beginning
of the B level files.
In my opinion,
default style is appropriate for documents with short B units;
while -tocbis style
is appropriate for documents with long B units with
a few sub-units; and -tocter style is appropriate
for documents with long B units with
a lot of sub-units.
As you may have noticed, this manual is cut by following the
-tocbis style.
Whatever the style is, if a B unit is cut
(e.g. because its text is enclosed in
\cutdef{C}… \cutend),
then every C unit goes into its own file and there is no sublist
after the relevant B level entry in the A level table of links.
7.2.4 Examples
Consider, for instance, a book document with a long chapter
that you want to cut at the section level, showing subsections:
\chapter{A long chapter}
.....
\chapter{The next chapter}
Then, you should insert a \cutdef at chapter start and a
\cutend at chapter end:
\chapter{A long chapter}
%HEVEA\cutdef[1]{section}
.....
%HEVEA\cutend
\chapter{The next chapter}
Then, the file
that would otherwise contain the long chapter now contains the chapter
title and a table of sections.
No other change is needed, since the command \section already
performs the appropriate \cuthere{section}{...} commands,
which were ignored by default.
(Also note that cutting macros are placed inside %HEVEA comments,
for LATEX not to be disturbed).
The \cuthere macro can be used to put some document parts into
their own file.
This may prove appropriate for long cover pages or abstracts that would
otherwise go into the root file.
Consider the following document:
\documentclass{article}
\begin{document}
\begin{abstract} A big abstract \end{abstract}
...
Then, you make the abstract go to its own file as it was a cutting
unit by typing:
\documentclass{article}
\usepackage{hevea}
\begin{document}
\cuthere{\cuttingunit}{Abstract}
\begin{abstract} A big abstract \end{abstract}
...
(Note that, this time, cutting macros appear unprotected in the
source. However, LATEX still can process the document, since the
hevea package is loaded).
7.2.5 More and More Pages in Output
In some situations it may be appropriate to produce many
pages from one source files.
More specifically, loading the deepcut package will put
all sectioning units of your document (from \part to
\subsection in their own file.
Similarly, loading the figcut package will make all figures
and tables go into their own file.
The figcut package accepts two options, show and
noshow. The former, which is the default, instructs HEVEA
to repeat the caption into the main flow of text, with a link to the figure.
The latter option disables the feature.
7.3 More Advanced Usage
In this section we show how to alter some details of HACHA
behaviour.
This includes controlling output file names and the title of generated
web pages and introducing arbitrary cuts.
7.3.1 Controlling output file names
When invoked as hacha doc.html,
HACHA produces a index.html table of links file that
points into doc001.html,
doc002.html, etc. content files.
This is not very convenient when one wishes to point inside the
document from outside.
However, the \cutname{name} command
sets the name of the current output file name as name.
Consider a document cut at the section level, which contains the
following important section:
\section{Important\label{important} section}
...
To make the important section goes into file important.html,
one writes:
Then, section “Important section” can be referenced from
an HEVEA unaware html page by:
In this document, there is a very
<a href="important.html#important">important section</a>.
If you are reading the html version of this manual, you may check
that you are now reading file cutname.html.
This particular file name has been specified from the source
using \cutname{cutname.html}.
7.3.2 Controlling page titles
When HACHA creates a web page from a given sectional unit,
the title of this page normally is the name of the sectional unit.
For instance, the title of this very page should be
“Cutting your document into pieces with HACHA”.
It is possible to insert some text at the beginning of all page
titles, by using the \htmlprefix command.
Hence, by writing
\htmlprefix{\hevea{} Manual: } in the document,
the title of this page would become:
“HEVEA Manual: Cutting your document into pieces with HACHA”
and the title of all other pages would show the same prefix.
7.3.3 Links for the root file
The command \toplinks{prev}{up}{next} instructs HACHA to put links to a
“previous”, “up” and “next” page in the root file.
The following points are worth noticing:
The \toplink command must appear in the document preamble
(i.e. before \begin{document}).
The arguments
prev, up and next should expand to urls,
notice that these argument are processed (see section 8.1.1).
When one of the expected argument is left empty,
the corresponding link is not generated.
This feature can prove useful to
relate documents that are generated independently by
HEVEA and HACHA.
7.3.4 Controlling link aspect from the document
By default the links to the previous, up and next pages show a small
icon (an appropriate arrow). This can be changed with the command
\setlinkstext{prev}{up}{next},
where prev, up and next are some LATEX
source.
For instance the default behaviour is equivalent to:
Command \setlinkstext behaves as \toplinks does.
That is, it must occur in document preamble, arguments are processed
and empty arguments yield no effect (i.e. defaults apply).
7.3.5 Cutting a document anywhere
Part of a document goes to a separate file when enclosed in a
cutflow environment:
\begin{cutflow}{title}…\end{cutflow}
The content “…” will go into a file of its
own, while
the argument title is used as the title of the introduced
html page.
The html page introduced here does not belong to the normal flow of
text.
Consequently, one needs an explicit reference from the normal flow of text
into the content of the cutflow environment.
This will occur naturally when the content of the cutflow environment.
contains a \label construct.
This look natural in the following quiz example:
\paragraph{A small quiz}
\begin{enumerate}
\item What is black?
\item What is white?
\item What is Dylan?
\end{enumerate}
Answers in section~\ref{answers}.
\begin{cutflow}{Answers}
\paragraph{Quiz answers}\label{answers}
\begin{enumerate}
\item Black is black.
\item White is white.
\item Dylan is Dylan.
\end{enumerate}
\end{cutflow}
However,introducing html hyperlink targets and
references with the \aname and \ahrefloc commands
(see section 8.1.1)
will be more practical most of the time.
The starred variant environment
cutflow* is the same
as cutflow, save for the html header and footer (see
Section 7.1) which are not replicated in the introduced
page.
7.3.6 Footnotes
Footnote texts (given as arguments either to \footnote or
\footnotetext) do not go directly to output.
Instead, footnote texts accumulate internally in a buffer,
awaiting to be flushed.
The flushing of notes is controlled by the means of a current
flushing unit, which is a sectional unit name or
document — a fictional unit above all units.
At any point, the current flushing unit is the value of the
command \@footnotelevel.
In practice, the flushing of footnote texts is performed by two commands:
\flushdef{secname} simply sets
the flushing unit to secname.
\footnoteflush{secname} acts
as follows:
If argument secname is equal to or above the
current flushing unit, then footnote texts are flushed (if any).
In the output, the texts themselves are surrounded by special comments
that tag them as footnote texts and record secname.
Otherwise, no action is performed.
The article style file performs \flushdef{document},
while the book style file performs \flushdef{chapter}.
At the end of processing, \end{document} performs
\footnoteflush{\@footnotelevel}, so as to flush any pending notes.
Cutting commands interact with footnote flushing as follows:
\cuthere{secname}
executes \footnoteflush{secname}.
Remember that all sectioning commands perform
\cuthere with their sectional unit name as argument.
\cutdef{secname}
saves the current flushing unit and buffer on some internal stack,
starts a new buffer for footnote texts, and
sets the current flushing unit to secname
(by performing \flushdef{secname}).
\cutend first flushes any pending texts
(by performing \footnoteflush with the current flushing unit
as argument), and restores the flushing unit and footnote text buffer saved
by the matching \cutdef.
The starred variants \cutdef* and \cutend* perform
no operation that is related to footnotes.
Later, when running across footnote texts in its input file, HACHA
sometimes put notes in a separate file.
More precisely, HACHA has knowledge of the
current cutting level, the current sectional unit where
cuts occur — as given by the relevant \cutdef.
Moreover, HACHA knows the current section level —
that is, the last sectional command processed.
Besides, HACHA extracts the note level from the comments
that surround the notes (as given by the command
\footnoteflush that produced the notes).
Then, HACHA creates a separate file for notes
when the cutting level and the note level differ,
or when the current level is above the cutting level
(e.g. the current level is document while the cutting
level is chapter).
As a result, notes should stay where they are when they occur at the end of
HACHA output file and otherwise go to a separate file.
To make a complicated story even more complicated,
footnotes in minipage environments or in the arguments
to \title or \author have a different, I guess satisfactory,
behaviour.
Given the above description, footnotes are managed by default as follows.
In style article, hevea puts all footnotes
go at the end of the html file.
A later run of hacha creates a separate footnote file.
In style book, footnotes are collected at the end of
chapters. A later run of hacha leaves them where they
are. Footnotes in the title or author names are managed specially,
they will normally appear at the end of the root file.
In case you wish to adopt a book-like behaviour for
an article (footnotes at the end of sections),
it suffices to insert \flushdef{section} in the document
preamble.
We now give a few example of interaction between notes and cutting.
We first consider normal behaviour.
The page you are reading is a section page, since the current
cutting unit is “section”. The current unit is “subsection”.
The following two subsubsections are sent to their own files by
the means of a \cutdef{subsubsection}/\cutend pair.
As a result the text of footnotes appear at the end of the
subsubsection pages.
The following two subsubsections are sent to their own files by
the means of a \cutdef*{subsubsection}/\cutend* pair.
As a result, the text of footnotes in the subsections appear
at the end of the current section page.3
Finally, to send the footnotes in subsubsections
to a separate web page, one should use
a \cutdef{subsubsection}/\cutend pair
(to create a proper buffer for subsubsection notes),
redefine the flushing unit, and flush notes explicitly.
Displayed-paragraph environments translate to block-level
elements.
In addition to the environments described in this section,
HEVEA implements the center, flushleft and
flushright environments.
HEVEA also implements the corespondant TEX style declaration
\centering\raggedright and \raggedleft,
but these declarations may not work as expected, when they do not
appear directly inside a displayed-paragraph environment or inside an array
element.
B.6.1 Quotation and Verse
The quote and quotation environments are the same thing: they
translate to BLOCKQUOTE elements.
The verse environment is not supported.
B.6.2 List-Making environments
The itemize, enumerate and description
environments translate to the ul, ol, and
DL elements and this is the whole story.
As a consequence, no control is allowed on the appearances of these
environments. More precisely optional arguments to \item do not
function properly inside itemize and enumerate. Moreover, item
labels inside itemize or numbering style inside enumerate
are browser dependent.
However, customized lists can be produced by using the
the list environment (see next section).
B.6.3 The list and trivlist
environments
The list environment translates to the
DL element.
Arguments to \begin{list} are handled as follows:
\begin{list}{default_label}{decls}
The first argument default_label is the label generated by an
\item command with no argument.
The second argument, decls is a sequence of declarations.
In practice, the following declarations are relevant:
\usecounter{counter}
The counter counter is incremented by \refstepcounter
by every \item command with no argument, before it does
anything else.
\renewcommand{\makelabel}[1]{…}
The command \item executes
\makelabel{label}, where label is the item
label, to print its label.
Thus, users can change label formatting by redefining
\makelabel.
The default definition of \makelabel simply echoes label.
As an example, a list with an user-defined counter can be defined as
follows:
Both LATEX 2є \documentclass and old LATEX
\documentstyle are accepted.
Their argument style is interpreted by attempting to load a
style.hva file.
Presently, only the style files article.hva, seminar.hva,
book.hva and report.hva exist, the latter two
being equivalent.
If one of the recognized styles has already been loaded at the time when
\documentclass or
\documentstyle is executed, then no attempt to load a style
file is made. This allows to override the document style file by
giving one of the four recognized style files of HEVEA as a command
line argument (see 2.2).
Conversely, if HEVEA attempt to load style.hva
fails, then a fatal error is flagged, since it can be sure
that the document cannot be processed.
B.5.2 Packages and Page Styles
HEVEA reacts to
\usepackage[options]{pkg} in
the following way:
The whole
\usepackage command with its arguments gets echoed to the
image file (see 6).
HEVEA attempt to load file pkg.hva,
(see section C.1.1.1 on where HEVEA searches for files).
Note that HEVEA will not fail if it cannot load
pkg.hva and that no warning is issued in that case.
The HEVEA distribution contains implementations of some packages,
such as verbatim, colors, graphics, etc.
In some situations it may not hurt at all if HEVEA does not
implement a package, for instance HEVEA does not provide an
implementation for the fullpage package.
Users needing an implementation of a package that is widely used and
available are encouraged to contact the
author.
Experienced users may find it fun to attempt to write package
implementations by themselves.
B.5.3 The Title Page and Abstract
All title related commands exist, with the following peculiarities:
The argument to the \title command appears
in the html document header. As a consequence, titles should
remain simple. Normal design (as regards HEVEA) is for
\title to occur in the document preamble, so that the title
is known at the time when the document header is emitted (while
processing \begin{document}). However, there are two subtleties.
If no \title
command occurs in document preamble and that one \title
command appears in the document, then the title is saved into the
.haux file for a next run of HEVEA to put it in the
html document header.
If \title commands are present both in preamble and after
\begin{document}, then the former takes precedence.
When not present the date is left empty. The
\today command generates will work properly
only if hevea is invoked with the -exec xxdate.exe
option. Otherwise \today generates nothing and a warning is
issued.
The abstract environment is present is all base styles,
including the book style.
The titlepage environment does nothing.
hevea-2.23-manual/manual008.html 0000644 0043171 0051216 00000033567 12477067073 016457 0 ustar maranget cristal
With a little help from LATEX
Sometimes,
HEVEA just cannot process its input, but it remains acceptable to
have LATEX process it, to produce an image from
LATEX output and to include a link to this image into HEVEA
output.
HEVEA provides a limited support for doing this.
6.1 The image file
While outputting doc.html, HEVEA echoes some
of its input to the image file,
doc.image.tex.
Part of this process is done at the user’s request.
More precisely, the following two constructs
send text to the image file:
\begin{toimage} text \end{toimage}
%BEGIN IMAGE text %END IMAGE
Additionally, \usepackage commands, top-level and global
definitions
are automatically echoed to the image file. This enables using
document-specific commands in text above.
Output to the image file builds up a current page, which is flushed
by the \imageflush command.
This command has the following effect: it outputs a strict page break
in the image file, increments the image counter and
output a <img src="pagename.png"> tag in HEVEA
output file, where pagename is build from the image counter
and HEVEA output file name.
Then the imagen script has to be run by:
# imagendoc
This will process the doc.image.tex
file through LATEX,
dvips, ghostscript and a few others tools, which must all be
present (see section C.4.1), finally producing one
pagename.png file per page in the image
file.
The usage of imagen is described at
section C.1.5. Note that imagen is a simple shell
script. Unix users can pass hevea the command-line option
-fix. Then hevea will
itself call imagen, when appropriate.
6.2 A toy example
Consider the “blob” example from section 4.2.
Here is the active part of a blob.tex file:
Observe that the trick can be used to replace missing symbols by small
.png images. However, the cost may be prohibitive, text rendering
is generally bad, fine placement is ignored and font style changes are
problematic.
Cost can be lowered using \savebox, but the other problems remain.
6.3 Including Postscript images
In this section, a technique to transform included Postscript images
into included bitmap images is described.
Note that this technique is used by HEVEA implementation of the
graphics package (see section B.14.1),
which provides a more standard manner to include Postscript images in
LATEX documents.
Included images are easy to manage: it suffices to let LATEX do the
job.
Let round.ps be a Postscript file, which is included as an
image in the source file round.tex (which must load the
epsf package):
\begin{center}
\epsfbox{round.ps}
\end{center}
Then, HEVEA can have this image translated into a inlined (and
centered) .png image by modifying source as follows:
(Note that the round.tex file
still can be processed by LATEX, since comment equivalents
of the toimage environment are used and that
the \imageflush command is inside
a %HEVEA comment — see section 5.3.)
Then, processing round.tex through HEVEA and
imagen yields:
It is important to notice that things go smoothly because the
\usepackage{epsf} command gets echoed to the
image file. In more complicated cases, LATEX may fail
on the image file because it does not load the right
packages or define the right macros.
However, the above solution implies modifying the original LATEX
source code.
A better solution is to define the \epsfbox
command, so that HEVEA echoes \epsfbox and its argument to
the image file and performs \imageflush:
Such a definition must be seen by HEVEA only. So, it is best put
in a separate file whose name is given as an extra argument on
HEVEA command-line (see section 5.1).
Putting it in the document source
protected inside an %HEVEA comment is a bad idea, because it might then get echoed to the image file
and generate trouble when LATEX is later run by imagen.
Observe that the above definition of \epsfbox is a definition
and not a redefinition (i.e.\newcommand is used and not
\renewcommand),
because HEVEA does not know about \epsfbox by default.
Also observe that this not a recursive definition, since
commands do not get expanded inside the toimage environment.
Finally, if the Postscript image is produced from a bitmap, it is
a pity to translate it back into a bitmap.
A better idea is first to generate a PNG file from the bitmap source
independantly
and then to include a link to that PNG file in html output, see
section 8.2 for a description of this more adequate technique.
6.4 Using filters
Some programs extend LATEX capabilities using a filter principle.
In such a scheme, the document contains source fragments for the program.
A first run of the program on LATEX source changes these fragments
into constructs that LATEX (or a subsequent stage in the paper
document production chain, such as dvips) can handle.
Here again, the rule of the game is keeping HEVEA away from the
normal process: first applying the filter, then making HEVEA send
the filter output to the image file, and then having
imagen do the job.
Consider the gpic filter, for making drawings.
Source for gpic is enclosed in .PS….PE,
then the result is available to subsequent LATEX source as a TEX
box \box\graph.
For instance the following source, from a smile.tex file,
draws a “Smile!” logo as a centered
paragraph:
Both the image description (.PS… .PE) and usage (\box\graph)
are for the image file, and they should be
enclosed by %BEGIN IMAGE… %END IMAGE comments.
Additionally, the image link is put where it belongs by an
\imageflush command:
Observe how the -o argument to HEVEA is used and that
imagen argument is HEVEA output basename (see
section C.1.1.2 for the full definition of HEVEA output basename).
In the gpic example, modifying user source cannot be totally avoided.
However, writing in a generic style saves typing.
For instance, users may define the following environment for
centered gpic pictures in LATEX:
The warnings above are normal: they are issued when HEVEA runs
across the LATEX-intended definition of the centergpic
environment and refuses to override its own definition for that
environment.
Sectioning commands from \part down to
\subparagraph are defined in base style files.
They accept an optional argument and have starred versions.
The non-starred sectioning commands from \part down to
\subsubsection show section numbers in sectional unit headings,
provided their level is greater than or equal to the current
value of the secnumdepth counter.
Sectional unit levels and the default value of the secnumdepth counter
are the same as in LATEX.
Furthermore, given a sectional unit secname, the
counter secname exists and the appearance of sectional units
numbers can be changed by redefining \thesecname.
For instance, the following redefinition turn the numbering of
chapters into alphabetic (uppercase) style:
\renewcommand{\thechapter}{\Alph{chapter}}
When jumping to anchors, browsers put the targeted line on top
of display. As a consequence, in the following code:
\section{A section}
\label{section:section}
...
See Section~\ref{section:section}
Clicking on the link produced by
\ref{section:section} will result in not displaying the
targeted section title.
A fix is writing:
\section{\label{section:section}A section}
...
See Section~\ref{section:section}
Starting with version 2.04, HEVEA and HACHA will use the label name
(section:section above) for the table of contents they generate.
For instance, the source code for the next sectioning command just
below is:
\subsection{The \label{appendix}Appendix}
As a consequence, the link to the next section on top
of this page should read as:
That is, HEVEA used the label name given in source as
an anchor.
Notice that this behaviour applies to the \label command
that occurs first in the sectioning command argument.
B.4.2 The Appendix
The \appendix command exists and should work as in LATEX.
B.4.3 Table of Contents
HEVEA now generates a table of contents, using a procedure similar
to the one of LATEX(a .htoc file is involved).
One inserts this table of contents in the main document by issuing
the command \tableofcontents.
Table of contents is controlled by the counter tocdepth.
By default, the table of contents shows sectioning units down to the
subsubsection level in article style and down to the subsection level
in book (or report) style. To include more or less
sectioning units in the
table of contents, one should increase or decrease the tocdepth
counter.
It is important to notice that HEVEA produces such a table of
contents, only when it has total control over cross-references.
More precisely, HEVEA cannot produce the table of contents when it
reads LATEX-produced .aux files.
Instead, it should read its own .haux files.
This will naturally occur if no .aux files are present,
otherwise these .aux files should be deleted, or HEVEA
should be instructed not to read them with the command-line option
-fix
(see Sections B.11.1 and C.1.1.4).
One can also add extra entries in the table of contents by using
the command \addcontentslines, in a way similar
to LATEX homonymous command.
However, hyperlinks need to be introduced explicitly,
as in the following example, where
an anchor is defined in the section title and referred to in the
argument to \addcontentsline:
However, HEVEA has a more sophisticated way of producing
a kind of map w.r.t. the sectioning of the document.
A later run of HACHA on HEVEA output file splits it
in smaller files organized in a tree whose nodes are tables of
links.
By contrast with LATEX, starred sectioning commands generate
entries in these tables of contents.
Table of contents entries hold the optional argument to sectioning
commands or their argument when there is no optional
argument. Section 7 explains how to
control HACHA.
The hevea command has two operating modes, normal mode and
filter mode.
Operating mode is determined by the nature of the last command-line
argument.
C.1.1.1 Command line arguments
The hevea command interprets its arguments as names of
files and attempts to process them.
Given an argument filename there are two cases:
If filename is base.tex or
base.hva,
then a single attempt to open filename is made.
In other cases,
a first attempt to open filename.tex is made.
In case of failure, a second attempt to open filename is made.
In all attempts, implicit filenames are
searched along hevea search path, which consist in:
the current directory “.”,
user-specified directories (with the -I command-line
option),
hevea library directory.
one of the sub-directories html, text or
info from hevea library directory, depending upon
hevea output format,
The hevea library directory is fixed at compile-time
(this is where hevea library files are installed)
and typically is /usr/local/lib/hevea.
However, this compile-time value can be overridden
by setting the HEVEADIR shell environment variable.
In all cases, the value of hevea library directory can
be accessed from the processed document as the value of the command
\@hevealibdir.
C.1.1.2 Normal mode
If the last argument has an extension that is different from
.hva or has no extension,
then it is interpreted as the name of the main input file.
The main input file is the document to be translated and normally
contains the \documentclass command.
In that case two basenames are defined:
The input basename, basein,
is defined as the main input file name,
with extension removed when present.
The output basename, baseout, is basein
with leading directories omitted. However the output basename can be
changed, using the -o option (see below).
HEVEA will attempt to load the main input file.
Ancillary files from a previous run of LATEX
(i.e..aux, .bll and .idx files)
will be searched as basein.ext.
The output base name governs all files produced by HEVEA.
That is, html output of HEVEA normally goes to the file
baseout.html,
while cross-referencing information goes into
baseout.haux. Furthemore,
if an image file is generated (cf. section 6), its
name will be baseout.image.tex.
Thus, in the simple case where the hevea command is invoked
as:
# hevea file.tex
The input basename is file and the output basename also is
file. The main input file is searched once along hevea
search path as file.tex.
html output goes into file
file.html, in the current directory.
In the more complicated case where the hevea command is invoked
as:
# hevea ./dir/file
The input base name is ./dir/file and the output basename is
file. The main input file is loaded by first attempting to
open file ./dir/file.tex, then file ./dir/file.
html output goes into file file.html, in the current directory.
Finally, the output base name can be a full path,
but you have to use option -o.
For instance, we consider:
# hevea -o out/out.html file.tex
Then, html output goes into out/out.html — notice
that directory out must exist.
Furthermore, hevea output base name is out/out.
This means that hevea generates files
out/out.haux, out/out.image.tex etc.
The article.hva, seminar.hva, book.hva and
report.hva
base style files from HEVEA library are special.
Only the first base style file is loaded and the
\documentclass command has no effect when a base style file is
already loaded. This feature allows to override the document base style.
Thus, a document file.tex can be translated using the
article base style as follows:
# hevea article.hva file.tex
C.1.1.3 Filter mode
If there is no command-line argument, or if the last command-line
argument has the extension .hva, then
there is neither input base name nor output base name,
the standard input is read and
output normally goes to the standard output.
Output starts immediately, whithout waiting for \begin{document}.
In other words hevea acts as a filter.
Please note that this operating mode is just for translating
isolated LATEX constructs.
The normal way to translate a full document file.tex being
“heveafile.tex” and not
“hevea < file.tex > file.html”.
C.1.1.4 Options
The hevea command recognises the following options:
-version
Show hevea version and exit.
-v
Verbose flag, can be repeated to increase
verbosity. However, this is mostly for debug.
-dv
Add border around some of the block-level
elements issued. Specifically, all div and p are bordered,
while the structure of displayed material is also shown.
-s
Suppress warnings.
-Idirname
Add dirname to the search path.
-oname
Make name the output basename.
However, if name is base.html, then
the output basename is base.
Besides, -o - makes HEVEA output to standard output.
-efilename
Prevent hevea from loading any file
whose name is filename. Note that this option applies to all
files, including hevea.hva and base style files.
-fix
Iterate HEVEA until a fixpoint is found.
Additionally, images get generated automatically.
-O
Optimise html by calling esponja (see
section C.1.3).
-execprog
Execute file prog and read the
output. The file prog must have execution permission and is
searched by following the searching rules of hevea.
-francais
Deprecated by babel support. This
option issues a warning message.
-help
Print version number and a short help message.
The following options control the html code produced by
hevea. By default, hevea outputs a page encoded in
US-ASCII with most symbols rendered as html or numerical Unicode
entities.
-entities
Render symbols by using entities. This is the default.
-textsymbols
Render symbols by English text.
-moreenties
Enable the output of some infrequent entities. Use
this option to target browsers with wide entities support.
-mathml
Produces MathML output for equations, very
experimental.
-pedantic
Be strict in interpreting html
definition. In particular, this option disable size and color changes inside
<PRE>… </PRE>, which are otherwise performed.
The following options select and control alternative output formats
(see section 11):
-text
Output plain text. Output file
extension is .txt.
-info
Output info format. Output file extension
is .info.
-wwidth
Set the line width for text or info
output, defaults to 72.
Part A of this document is
a tutorial introduction to HEVEA,
while Part B is the reference manual of HEVEA.
C.1.2 HACHA usage
The hacha command interprets its argument
base.html as the name of
a html source file to cut into pieces.
It also recognises the following options:
-v
Be a little verbose.
-ofilename
Make HACHA output go into file
filename (defaults to index.html).
Additionally, if filename is a composite filename,
dir/base, then all files outputted by HACHA will
reside in directory dir.
-tocbis
Another style for table of contents:
sub-tables are replicated at the beginning of
every file.
-tocter
Like -tocbis above, except that
sub-tables do not appear in the main table of contents
(see Section 7.2.3).
-nolinks
Do not insert Previous/Up/Next links in
generated pages.
-hrf
Output a base.hrf file, showing
in which output files are the anchors from the input file gone.
The format of this summary is one
“anchor\tfile” line per anchor.
This information may be needed by other tools.
-help
Print version number and a short help message.
Section 7 of the user manual explains how to
alter HACHA default behaviour.
C.1.3 esponja usage
The program esponja
is part of HEVEA and is designed to optimise hevea
output.
However, esponja can also be used alone to optimise
text-level elements in html files.
Since esponja fails
to operate when it detects incorrect html, it can be used as a
partial html validator.
C.1.3.1 Operating mode
The program esponja interprets its arguments as names of
files and attempt to process them.
It is important to notice that esponja will replace files
by their optimised versions, unless instructed not to do so with
option -n.
Invoking esponja as
# esponja foo.html
will alter foo.html.
Of course, if esponja does not succeed in making foo.html any
smaller or if esponja fails, the original foo.html
is left unchanged.
Note that this feature allows to optimise all html files in a given directory
by:
# esponja *.html
C.1.3.2 Options
The command esponja recognises the following options:
-v
Be verbose, can be repeated to increase verbosity.
-n
Do not alter input files. Instead, esponja
output for file input.html goes to file
input.esp. Option -n implies option -v.
-u
Output esponja intermediate version of html.
In most occasions, this amounts to pessimize instead of to optimise.
It may yield challenging input for other html optimisers.
C.1.4 bibhva usage
The program bibhva
is a simple wrapper, which basically
forces bibtex into accepting a .haux file as input
and producing a .hbbl file as output.
Usage is
bibhva bibtex-optionsbasename.
C.1.5 imagen usage
The command imagen is a simple shell script that translates
a LATEX document into many .png images.
The imagen script relies on much software to be installed on
your computer, see Section C.4.1.
It is a companion program of HEVEA, which must have been previously run as:
# hevea… base.tex
or # hevea… -obase.html…
In both cases, base is HEVEA output basename.
When told to do so (see section 6)
HEVEA echoes part of its input into
the base.image.tex file.
The imagen script should then be run as:
# imagenbase
The imagen script produces
one basennn.png image file per page in the
base.image.tex file.
This is done by first calling latex on
base.image.tex, yielding one dvi
file.
Then, dvips translates this file into one single Postscript file that
contains all
the images, or into one Postscript file per image,
depending upon your version of dvips.
Postscript files are interpreted by ghostscript (gs) that
outputs ppm images, which are then fed into a series of
transformations that change them into .png files.
The imagen script recognises the following options:
-magnnnn
Change the enlarging ratio that is applied
while translating DVI into Postscript.
More precisely, dvips is run with -xnnnn
option.
Default value for this ration is 1414, this means
that, by default, imagen magnifies LATEX output by a factor of
1.414.
-extracommand
Insert command as an additional
stage in imagenppm to png production chain.
command is an Unix filter that expects a ppm image
in its standard input and outputs a ppm image on its standard output.
A sensible choice for command is one command from the
netpbm package, several such commands piped together, or
various invocations of the convert command from ImageMagick.
-quantnumber
Add an extra color quantisation step
in imagenppm image production chain, where
number is the maximal number of colors in the produced
images. This option may be needed as a response to a failure in the
image production chain. It can also help in limiting image files size.
-png
Output PNG images. This is the default.
-gif
Output GIF images in place of PNG images.
GIF image files have a .gif extension.
Note that hevea should have been previously run as
hevea gif.hvabase.tex (so that the proper
.gif filename
extension is given to image file references from within the html
document).
-pnm
Output PPM images. This option mostly serves
debugging purposes. Experimented users can also take advantage
of it for performing additional image transformation or
adopting exotic image formats.
-targ
Pass option “-targ” to
dvips.
For instance, using “-t a3” may help when images are
truncated on the right.
-pdf
Have imagen call pdflatex instead
of latex.
The first three options enable users to correct some misbehaviours.
For instance, when the document base style is seminar, image
orientation may
be wrong and the images are too small. This can be cured by invoking
imagen as:
# imagen -extra "pnmflip -ccw" -mag 2000base
Notice that hevea calls imagen by itself,
when given the command-line option -fix.
In that situation, the command-line options of imagen can
be controlled from source file by using the
command \@addimagenopt (see Section 10.7).
C.1.6 Invoking hevea, hacha and imagen
In this section, we give a few sequence of (Unix) commands to build
the html version of a document in various
situations. The next section gives a few
Makefile’s for similar situations.
We translate a file doc.tex
that requires a specific style file doc.hva.
The file is first translated into doc.html by hevea,
which also reads
the specific style file doc.hva.
Then, hacha cuts doc.html into several,
doc001.html, doc002.html, etc. also producing the
table of links file index.html.
# hevea -fix doc.hva doc.tex
# hacha doc.html
Thanks to the command-line option -fix, hevea runs the
appropriate number of times automatically.
In case hevea produces a non-empty doc.image.tex
file, then hevea calls imagen by itself
(because of option -fix).
Hence, the above sequence of two commands is also appropriate in
that situation.
In case some problem occurs, it is sometime convenient to
run imagen by hand.
It is time not to use the option -fix.
# rm -f doc.image.tex
# hevea doc.hva doc.tex
Now, hevea normally has shown the imagen
command line that it would have run, if it had been given
the option -fix.
For instance, if doc.hva includes \input{gif.hva}, then
hevea shows the following warning:
HeVeA Warning: images may have changed, run 'imagen -gif doc'
Now, one can run imagen as it should be.
It is sometime convenient not to clobber the source directory with
numerous target files.
It suffices to instruct
hevea and hacha to output files in a
specific directory, say doc.
Notice that hevea does not create the target directory
doc: it must exist before hevea runs.
Again, in case hevea calls imagen,
image generation should proceed smoothly and the final files
doc001.png, doc002.png, … should go into
directory doc.
In all situations, while installing files to their final destination,
it is important not to forget any relevant files.
In particular, in addition to the root file
(index.html), contents files (doc001.html,
doc002.html, etc.) and images
(doc001.png, doc002.png, etc.),
one should not forget the arrow images and the
style sheet generated by hacha
(contents_motif.gif, next_motif.gif,
previous_motif.gif and doc.css).
As a consequence, producing all files into the subdirectory
doc may be a good idea, since then one easily install all
relevant files by copying doc to a public destination.
# cp -r doc $(HOME)/public_html
However, one then also installs the auxiliary files of hevea,
and hevea output file doc.html, which is no longer
useful once hacha has run.
Hence, those should be erased beforehand.
Note that the clean rule removes all the doc001.html,
doc002.html, etc. and doc.css files produced by
hacha.
Also note that make clean also removes the
doc.haux, doc.hind and doc.htoc files, which are HEVEA
auxiliary files.
When the image file feature is used, one can use the
following, extended, Makefile:
The above Makefile directly produces html and PNG files
into the final directory $(HOME)/public_html/$(DOC).
The new partialclean entry erases files that are not
useful anymore, once imagen and hacha have
performed their tasks.
However, most often, it is more appropriate to build html and PNG files
in a specific directory, and then to copy them to their final
destination.
...
#document base name
DOC=doc
DIR=$(DOC)
BASE=$(DIR)/$(DOC)
INSTALLDIR=$(HOME)/public_html/$(DOC)
...
install: partialclean
cp $(DIR)/* $(INSTALLDIR)
...
Tibault Suzanne authored the HTML 5 generator that now is
the default generator of HEVEA.
Abhishek Thakur implemented most of the new features of version
1.08, including, translations of symbols to Unicode entities,
the babel package, and style sheet support.
Christian Queinnec wrote an extra lexer to translate code
snippets produced by its tool
VideoC
for writing pedagogical documents on programming.
The very principle he introduced for interfacing the videoc
lexer with HEVEA main lexer is now used extensively throughout
HEVEA source code.
Pierre Boulet, by using HEVEA as a stage in his tool
MlDoc
for documenting Objective Caml source code, forced me into debugging
HEVEA implementation of the alltt environment.
Nicolas Tessaud implemented the -text and -info
output modes (see section 11).
Georges Mariano asked for
many feature, and argued a lot to have them implemented.
Limited support is offered.
The tabbing environment translate to a flexible tabular-like
environment.
Inside this environment, the command \kill ends a row, while
commands
\= and \> start a new column.
All other tabbing commands do not even exist.
B.10.2 The array and tabular
environments
These environments are supported, using html
table element, rendering is satisfactory in most (not too
complicated) cases.
By contrast with LATEX,
some of the array items always are typeset in display mode.
Whether an array item is typeset in display mode or not depends upon
its column specification,
the l, c and r specifications open display mode
while the remaining p and @ do not.
The l, c,r and @ specifications
disable word wrap, while the p specification enables it.
Entries in a column whose specification is l (resp. c or
r) get left-aligned (resp. centered or right-aligned)
in the horizontal direction.
They will get top-aligned in the vertical direction if there are
other column specifications in the
same array that specify vertical alignment constraints
(such as p{wd}, see below).
Otherwise, vertical alignment is unspecified.
Entries in a column whose specification is p{wd}
get left-aligned in the horizontal direction and
top-aligned in the vertical direction
and a paragraph break reduces to one line break inside them.
This is the only occasion where
HEVEA makes a distinction between LR-mode and paragraph mode.
Also observe that the length argument wd to the p
specification is ignored.
Some LATEX array features are not supported at all:
Optional arguments to \begin{array} and
\begin{tabular} are ignored.
The command \vline does not exists.
Some others are partly rendered:
Spacing between columns is different.
@ formatting specifications in \multicolumn
argument are ignored.
If a | appears somewhere in the column formatting
specification, then the array is shown with borders.
The command \hline does nothing if the array has borders
(see above). Otherwise, an horizontal rule is outputted.
The command \cline ignores its argument and is equivalent
to \hline.
Similarly the command
\extracolsep issues a warning and ignores its argument.
Additionally, the tabular* environment is
recognised and gets rendered as an html table with an advisory
width attribute.
By default, HEVEA implements the array package
(see [LATEX-bis, Section 5.3] and section B.17.2 in this
document), which significantly extends the
array and tabular environments.
hevea-2.23-manual/manual003.html 0000644 0043171 0051216 00000004675 12477067073 016450 0 ustar maranget cristal
How to get started
1 How to get started
Assume that you have a file, a.tex, written in LATEX, using the
article, book or report style. Then,
translation
is achieved by issuing the command:
# hevea a.tex
Probably, you will get some warnings. If
HEVEA does not crash, just ignore them for the moment
(Section 4 explains how to correct errors).
If everything goes fine, this will produce a new file,
a.html, which you can visualise through a html browser.
If you wish to experiment HEVEA on small LATEX source fragments,
then launch HEVEA without arguments. HEVEA will read its
standard input and print the translation on its standard output.
For instance:
Incidentally, notice that the symbol “∈” translates to the
appropriate numerical character reference and that the calligraphic
letter “E” renders as a red “E”. You can find some
more elaborate examples in
the on-line documentation.
This short section gives pointers to a few other translators. I
performed not extensive testing and make no thorough comparison.
LaTeX2html
LaTeX2html is a full system. It is written in perl and
calls LATEX when in trouble.
As a consequence, LaTeX2html is powerful but it may fail on
large documents, for speed and memory reasons.
More information on LaTeX2html can be found at
The principle behind TTH is the same as the one of
HEVEA: write a fast translator as a lexer, use symbol fonts and
tables. However, there are differences, TTH accepts both TEX and
LATEX source,
TTH is written in C and the full source is not available
(only lex output is available).
Additionally, TTH insist on not using any kind of LATEX
generated information and will show proper cross-reference labels,
even when no .aux file is present.
TTH output is a single document,
whereas HACHA can cut the output of HEVEA into several files.
(however there exists a commercial
version of TTH that provides this extra functionality).
TTH can be found at
TeX4ht is a highly configurable TeX-based authoring system dedicated
mainly to produce hypertext.
It interacts with TeX-based applications through style files
and postprocessors, leaving the processing of the source files
to the native TeX compiler. As a result, TeX4ht may be more powerful
than HEVEA, but may also be more difficult to configure.
More information on TeX4ht can be found at:
The htmlgen translator is specialized
for producing the Caml manuals. This is HEVEA direct ancestor and I
owe much to its author, X. Leroy. See [htmlgen] for a description
of htmlgen and a (bit outdated) discussion on LATEX to
html translation.
hevea-2.23-manual/manual024.html 0000644 0043171 0051216 00000012747 12477067073 016452 0 ustar maranget cristal
The Structure of the Document
B.2 The Structure of the Document
Document structure is a bit simplified with respect to LATEX, since
documents consist of only two parts.
The preamble starts as soon as HEVEA starts to operate and
ends with the \begin{document} construct.
Then, any input occurring before
\end{document} is translated to html.
However, the preamble is processed
and the preamble comprises the content of the files given as command-line
arguments to HEVEA, see section C.1.1.1).
As a consequence, command and environment definitions that
occur before \begin{document} are performed.
and they remain
valid during all the processing.
In particular one can define a header and a footer, by using the
\htmlhead and \htmlfoot commands in the preamble.
Those commands register their argument as the header and the footer of
the final html document. The header appears first while the footer
appears last in (visible) html output.
This is mostly useful when HEVEA output is later cut into pieces by
HACHA, since both header and footer are replicated
at the start and end of any file generated by HACHA.
For instance, to append a copyright notice at the end of all the html
pages, it suffices to invoke the \htmlfoot command as follows
in the document preamble:
\htmlfoot{\copyright to me}
The \htmlhead command cannot be used for changing anything outside of
the html document body, there are specific commands for doing this.
Those command must be used in the document preamble.
One can
change HEVEA default (empty) attribute of
the opening <body ...> tag by redefining
\@bodyargs.
For instance, you get black text on a white background, when the
following declaration occurs before \begin{document}:
Since version 1.08, a recommended alternative is to use style sheets:
\newstyle{body}{color:black; background:white;}
One can also change the default (empty) attribute of the opening
<html ...> tag by redefining
\@htmlargs. For instance you can set the language attribute
of the whole document by issuing the following redefinition in
the document preamble:
\renewcommand{\@htmlargs}{lang=en}
Similarly, some elements can be inserted into the output file
head element by redefining the \@meta command
(Such elements typically are meta, link, etc.).
As such text is pure html, it should be included in a
rawhtml environment. For instance, you can specify
author information as follows:
Note how \@meta is first bound to
\oldmeta before being redefined and how \oldmeta is
invoked in the new definition of \@meta.
Namely, simply overriding the old definition of \@meta would
imply not outputting default meta-information.
The \@charset command holds the value of the (html) document character
set. By default, this value is US-ASCII.
In previous versions of HEVEA, one could change the
value of the document character set by simply redefining
\@charset. Then, it was users responsability to provide a
(LATEX) document in the correspounding encoding.
This is no longer so, and users should not redefine
\@charset directly. Please, see Section 8.6 for details.
The advisory line breaking command \linebreak
will produce a line break if it has no argument or if its optional
argument is 4.
The \nolinebreak command is a null command.
The \\ and \\* commands output a <BR> tag,
except inside arrays where the close the current row.
Their optional argument is ignored.
The \newline command outputs a <BR> tag.
All other line breaking commands, declarations or environments are
silently ignored.
B.12.2 Page Breaking
They are no pages in the physical sense in html. Thus, all these
commands are ignored.
The programs hevea and hacha are written in
Objective Caml. Thus, you
really need Objective Caml (the more recent version, the better) to
compile them.
However, some binary distributions exist, which are managed by
people other than me (thanks to them).
Links to some of these distributions appear in HEVEA home page.
HEVEA users may instruct the program not to process a
part of the input (see section 6). Instead, this part is
processed into a bitmap file and HEVEA outputs a link to the image file.
LATEX source is changed into .png images by the imagen
script, which basically calls, LATEX, dvips,
ghostscript
and the convert command from the image processing package
ImageMagick.
To benefit from the full functionality of HEVEA, you need all
this software. However, HEVEA runs without them, but then you will
have to produce images by yourself.
C.4.2 Principles
The details are given in the README
file from the distribution.
Basically, HEVEA should be given a library
directory. The installation procedure stores the hevea.hva
and base style files in this directory.
There are two compilation modes, the opt mode selects the
native code OCaml compiler ocamlopt, while the byte
mode selects the bytecode OCaml compiler ocamlc.
In HEVEA case, ocamlopt produces code that is up to three
times as fast as the one produced by ocamlc.
Thus, default compilation mode is opt, however it may be the
case on some systems that only ocamlc is available.
Note that, when installing HEVEA from the source distribution, the
hevea.sty file is simply copied to HEVEA
library directory. It remains users responsibility to
make it accessible to LATEX.
It is possible to translate LATEX file into other formats than
html. There are two such formats: plain text and info files.
This enables producing postscript,
html, plain text and info manuals from one (LATEX) input file.
11.1 Text
The LATEX file is processed and converted into a plain text
formatted file. It allows some pretty-printing in plain text.
To translate into text, invoke HEVEA as follow:
# hevea -text [-w <width>] myfile.tex
Then, HEVEA produces myfiles.txt a plain text translation
of myfile.tex.
Additionally, the optional argument -w <number> sets the
width of the output for text formatting. By default, The text will be
72 characters wide.
Nearly every environment has been translated, included lists and tables.
The support is nearly the same as in html, excepted in some cases
described hereafter.
Most style changes are ignored, because it is hardly
possible to render them in plain text. Thus, there are no italics,
bold fonts, underlinings, nor size change or colours…
The only exception is for the verbatim environment
that puts the text inside quotes, to distinguish it more easily.
Tables with borders are rendered in the same spirit as in LATEX.
Thus for instance, it is possible to get vertical lines between some
columns only.
Table rendering can be poor in case of line overflow.
The only way to correct this (apart from changing the tables
themselves) is to adjust the formatting width, using the
the -w command-line option.
For now, maths are not supported at all in text mode. You can get very weird
results with in-text mathematical formulas.
Of course, simple expressions such as subscripts remains readable.
For instance, x2 will be rendered as x^2, but ∫01f(x)dx will
yield something like : int01f(x)dx.
11.2 Info
The file format info is also supported.
Info files are text files with limited hypertext links, they
can be read by using emacs info mode or the
info program.
Please note that HEVEA translates plain LATEX to info, and not
TeXinfo.
You can translate your LATEX files into info file(s) as follows:
# hevea -info [-w <width>] myfile.tex
Then, HEVEA produces the file myfile.info, an info
translation of myfile.tex.
However, if the resulting file is too large, it is cut into pieces
automatically,
and myinfo.info now contains references for all
the nodes in the others files, which are named myfile.info-1,
myfile.info-2,…
The optional argument -w has the same meaning as for text output.
The text will be organised in nodes that follow
the pattern of LATEX sectioning
commands. Menus are created to navigate through the sections easily
A table of content is produced automatically.
References, indexes and footnotes are supported, as they are in
html mode.
However, the info format only allows pointers to info nodes,
i.e. in HEVEA case, to sectional units.
As a consequence all cross references lead to sectional unit headers.
HEVEA can be freely used and redistributed without modifications.
Modifying and redistributing HEVEA implies a few constraints.
More precisely, HEVEA is distributed under the terms of the
Q Public License, but HEVEA binaries include the Objective Caml
runtime system, which is distributed under the Gnu Library General
Public License (LGPL).
See the LICENSE file for details.
HEVEA distribution includes .hva packages that are
implementations of LATEX packages.
Packages described in the “Blue Book” (makeidx,
ifthen, graphics —and graphicx!—,
color, alltt) are provided. Additionally, quite a
few extra packages are provided. I provide no full documentation for
these packages, users should refer to the first pages of the package
documentation, which can usually be found in the book [LATEX-bis],
in your local
LATEX installation or in a TeX CTAN-archive.
At the moment, most package options are ignored, except for the babel
package, where it is essential.
B.17.1 AMS compatibility
HEVEA amsmath package defines some of the constructs of the
amsmath package. At the moment, supported constructs are
the cases environment and matrix
environments [LATEX-bis, Section 8.4], the
environments for multi-line displayed
equations (gather,
split,…) [LATEX-bis, Section 8.5] and the
\numberwithin command [LATEX-bis, Section 8.6.2].
HEVEA provides support for the amssymb symbols using
Unicode. I found Unicode equivalent for most symbols. However, a few symbols
remain undefined (e.g.\varsubsetneqq).
B.17.2 The array and tabularx
packages
The array
package is described in
[LATEX-bis, Section 5.3] and in the local documentation of modern LATEX
installations.
It is a compatible extension of LATEX arrays (see B.10.2).
Basically, it provides new column specifications
and a \newcolumntype construct for user-defined column
specifications.
Table 1 gives a summary of the new column
specifications and of how HEVEA
implements them.
Table 1: Column specifications from the
array package
m{width}
Equivalent to the p column specification (the width
argument is ignored, entries are typeset in paragraph mode with
paragraph breaks being reduced to a single line break), except that the entries
are centered vertically.
b{width}
Equivalent to the p column specification, except that the entries
are bottom-aligned vertically.
>{decl}
Can be used before l, c, r,
p{…}, m{…} or
b{…}.
It inserts decl in front of the entries in the corresponding
column.
<{decl}
Can be used after l, c, r,
p{…}, m{…} or
b{…}.
It inserts decl after entries in the corresponding
column.
!{decl}
Equivalent to @{decl}
Note that centered, top-aligned or bottom-aligned
in the vertical direction, do not
have exactly the same meaning in LATEX and in html. However, the
aspect is the same when all columns agree w.r.t. vertical alignment.
Ordinary column types (c, l and r)
do not specify vertical alignment, which therefore becomes browser
dependent.
The >{decl} and <{decl}
constructs permit the encoding of TEX \cases macro as follows:
New column specifications are defined by the \newcolumntype
construct:
\newcolumntype{col}[narg]{body}
Where col is one letter, the optional narg is a
number (defaults to 0), and body is built up with
valid column specifications and macro-argument references
(#int).
Examples are:
\newcolumntype{C}{>{\bf}c}
\newcolumntype{E}[1]{*{#1}{c}}
\begin{tabular}{CE{3}}\hline
one & two & three & four \\
five & six & seven & eight \\ \hline
\end{tabular}
The column specification
C means that entries will be typeset centered and using bold
font, while the column specifications E{num}
stands for num centered columns. We get:
one
two
three
four
five
six
seven
eight
HEVEA implements column specifications with commands defined in the
\newcommand style. Thus, they have the same behaviour as regards
double definition, which is not performed and induces a warning
message.
Thus, a column specification that is
first defined in a macro.hva specific
file, overrides the document definition.
The tabularx
package [LATEX-bis, Section 5.3.5] provides a new tabular
environment tabularx and a new column type X. HEVEA
makes the former equivalent to tabular and the latter
equivalent to p{ignored}. By contrast with the
subtle array formatting that the tabularx package performs,
this may seem a crude implementation. However, rendering is usually
correct, although different.
More generally and from the html point of view such sophisticated
formatting is browser job in the first place.
However, the html definition allows suggested widths or heights for
table entries and table themselves.
From HEVEA point of view, drawing the border line between what can be
specified and what can be left to the browser is not obvious at all.
At the moment HEVEA choice is not to specify too much (in
particular, all length
arguments, either to column specifications or to the arrays
themselves, are ignored). As a consequence, the final, browser viewed,
aspect of arrays will usually be different from their printed
aspect.
B.17.3 The calc package
The calc
package enables using traditional, infix, notation for
arithmetic operations
inside the num argument to the
\setcounter{name}{num}
and \addtocounter{name}{num}
constructs (see [LATEX-bis, Section A.4])
The calc package provides a similar extension of the syntax
of the len argument to the \setlength and
\addtolength constructs.
HEVEA does not implement this extension, since it does not
implement length registers in the first place.
B.17.4 Specifying the document input encoding, the inputenc package
The inputenc
package enables LATEX to process a file
according to various 8 bits encodings, plus UTF-8.
The one used encoding is specified as an option while loading the package
\usepackage[encoding]{inputenc}.
At the moment, HEVEA recognises ten latin encodings
(from latin1 to latin10),
the koi8-r encoding,
the ascii encoding,
four windows encodings, the applemac encoding, and the
utf8 encoding.
It is important to notice that loading the inputenc package
alters the html document charset.
For instance if the latin9 input encoding is selected by:
\usepackage[latin9]{inputenc}
Then, the document charset is ISO-8859-15, which is an
enhanced version of ISO-8859-1 with some characters
for Œ, œ and €.
The rationale behind changing the output document charset at the same
time as changing the input encoding is to allow
non-ascii bytes in the input file to be replicated as
themselves in the output file.
However, one can change the document charset (and the output
translator) by using the internal command \@def@charset.
For instance, one can specify latin1 encoding, while
producing html pages in ascii:
See section 8.6 for a more thorough description of html
charset management.
The inputenc package also provides the
command \inputcoding{encoding} that
changes the input encoding at any time.
The argument encoding can be any of the options accepted
by \usepackage[encoding]{inputenc}.
The command \inputcoding of HEVEA
follows the behaviour of its LATEX counterpart, it the sense
that it obeys scope rules.
Notice that \inputcoding does not change the document output
encoding and charset.
B.17.5 More symbols
HEVEA implements the following packages: latexsymamssymb, textcomp (a.k.a. “Text companion”)
and eurosym (a nice € symbol in LATEX).
B.17.6 The comment package
The comment package provides two commands,
\excludecomment and \includecomment, for (re-)defining
new environments that ignore their content or that do nothing. The
comment environment is also defined as an environment of the first
kind.
B.17.7 Multiple Indexes with the index and
multind packages
HEVEA supports several simultaneous indexes, following the scheme
of the
index package,
which is present in modern LATEX distributions.
This scheme is backward compatible with the standard indexing scheme
of LATEX.
Support is not complete, but the most useful commands are available.
More precisely, HEVEA knows the following commands:
\newindex{tag}{ext}{ignored}{indexname}
Declare an index.
The first argument tag is a tag to select this index in other
commands; ext is the extension of the index information file
generated by LATEX (e.g., idx); ignored is ignored by
HEVEA; and indexname is the title of the index.
There also exists a
\renewindex commands that takes the same arguments and that can be
used to redefine previously declared indexes.
\makeindex
Perform
\newindex{default}{idx}{ind}{Index}.
\index[tag]{arg}
Act as the LATEX \index command except that the information
extracted from arg goes to the tag index.
The tag argument defaults to default, thereby yielding
standard LATEX behaviour for the \index command without an
optional argument.
There also exists a stared-variant \index* that Additionally
typesets arg.
\printindex[tag]
Compute, format and
output index whose tag is tag. The tag argument
defaults to default.
The multind package is
supported to some extend, but index is definitely to be
preferred.
B.17.8 “Natural” bibliographies, the natbib package
Implementation is quite complete and compatible
with version 8.0 of the natbib package
(with the keyval style command \setcitestyle).
Unimplemented features are the sorting and compression of references.
Automatic generation of an index of citations is handled, but
the current implementation probably is quite fragile.
B.17.9 Multiple bibliographies
The multibib package
HEVEA provides a slightly incomplete implementation of the
multibib package. The one non-implemented feature is the
simultaneous definition of more than one bibliography.
That is one cannot invoke \newcites as follows:
\newcites{suf1, suf2}{Title1, Title2}
Instead, one should perform to calls to the \newcites command:
\newcites{suf1}{Title1}\newcites{suf2}{Title2}
The chapterbib package
A basic implementation is provided. At the moment, you can
define one bibliography per included file and no toplevel
bibliography.
HEVEA implementation of this package recognises the option
sectionbib and provides the command \sectionbib
to change the sectioning command introduced by bibliographies.
B.17.10 Support for babel
B.17.10.1 Basics
HEVEA offers support for the LATEX package babel. When it reads the command
\usepackage[lang-list]{babel}
it loads babel.hva, and sends it the saved lang-list. The
file babel.hva then looks at each language (say x) in it, and loads x.hva, which offers support for the language x. As in LATEX, the last language in the list is selected as default. As an example the command
\usepackage[english,french,german]{babel}
would load babel.hva, then the files english.hva,french.hva,german.hva containing the respective definitions, and finally activate the definitions in german.hva and sets the current language to german.
B.17.10.2 Commands and languages
The following babel commands for changing and querying the language work as in LATEX :
\selectlanguage : to change the language
\iflanguage : to branch after comparing with current language
The language specific details are described in the corresponding
.hva file, just as in the .sty file for LATEX. Users
need to supply this file for their language, or modify/check the files
if they are already supplied with the distribution. The list of
languages is given below.
american
austrian
brazil
catalan
check
croatian
danish
dutch
english
esperanto
finnish
french
galician
german
italian
magyar
norsk
nynorsk
polish
portuguese
romanian
russian
slovak
slovene
spanish
swedish
turkish
B.17.10.3 Writing hva files
The languages for which .hva files are available with the
distribution are english, french, german, austrian, czech and portuguese. These
may need to be modified as not all accents and hyphenation techniques
are supported.
They can be written/modified as simple TEX files (see the section B.16.1.1 on writing TEX macros for details). As an example, one may also take a look at the file french.hva, which describes the details for french.
Note how all definitions are inside the definition for
\french@babel, which is the command that
\selectlanguage{french} would call. Similar commands need to be
provided (i.e.\x@babel in \x.hva for language
x).
Notice that it is wise to write the \x.hva in plain ascii only.
Some definitions may involve specifying Unicode characters, for doing
so, using the \@print@u is recommended (cf. Section 8.3).
The definition of Unicode characters can be found at
http://www.unicode.org/charts/.
Most language specific Unicode characters can be found in the first
few files.
This package in fact provides a enhanced \verb command that
can appear inside other command arguments.
This command is named \url,
but it can be used for any verbatim text, including DOS-like path
names.
Hence, one can insert urls in one’s document without worrying about
LATEX active characters:
This is a complicated url: \url{http://foo.com/~user#label%coucou}.
which gets typeset as: “This is a complicated url: http://foo.com/~user#label%coucou.”
The main use for the \url command is to specify urls as arguments to
HEVEA commands for hyperlinks (see section 8.1.1):
\hevea{} home page is
\ahrefurl{\url{http://hevea.inria.fr/}}
However the \url command is fragile, as a consequence it
cannot be used inside \footahref first argument (This is a
LATEX problem, not an HEVEA one).
The url package solves this problem by providing the
\urldef command
for defining commands whose body is typeset by using \url:
\urldef{\heveahome}{\url}{http://hevea.inria.fr/}
Such a source defines the robust command \heveahome as the
intended url.
Hence the following source works as expected:
Have a look at \footahref{\heveahome}{\hevea{} home page}
Using \url inside command definitions with a
#i argument is a bad idea, since
it gives “verbatim” a rather random meaning.
Unfortunately, in some situations (e.g, no %, no #),
it may work in LATEX. By
contrast, it does not work in HEVEA. In such situations,
\urldef should be used.
HEVEA implementation is somehow compatible at the “programming level”.
Thus, users can define new commands whose argument is understood
verbatim. The urlhref.hva style file
from the distribution
takes advantage of this to define the \url command, so that it both
typesets an url and inserts a link to it.
\input{urlhref.hva}
Have a look at \url{http://hevea.inria.fr/}
It yields “Have a look at http://hevea.inria.fr/”.
The urlhref.hva
style file (which is an HEVEA style file and not a LATEX
style file) can be adequate for bibliographic references,
which often use \url for its typesetting power.
Of course, loading urlhref.hva only makes sense when
all arguments to \url are urls…
B.17.12 Verbatim text: the moreverb and
verbatim packages
These two packages provide new commands and environments for
processing verbatim text.
I recommend using
moreverb
rather than verbatim,
since HEVEA implementation is more advanced for the former package.
B.17.13 Typesetting computer languages: the listings package
I strongly recommend the
listings package.
Learning the user interface requires a little effort, but it is worth
it.
HEVEA features a quite compatible implementation, please refer to
the original package documentation.
Do not hesitate to report discrepancies.
Note that HEVEA does not produce very compact
html in case you use this package.
This can be cured by
giving hevea the command-line option -O
(see C.1.1.4).
The lstlisting environment is styled through
an homonymous style class (see 9.2 and 9.3) and
most lstlisting environments get translated to div
elements with the appropriate \getenvclass{lstlisting} class,
which, by default is lstlisting.
A few points deserve mention:
The definition of default style class lstlisting includes
the important declarations
font-family:monospace; and white-space:pre;, which, more or less,
specify non-proportional font and mandatory line breaks.
In case you replace lstlisting by another style class (by
\setenvclass{lstlisting}{another one}), your
alternate definition should probably feature an identical
specification. Otherwise, rendering would be poor, as regards spacing
and line breaks.
Here is how specific listings are styled.
We first define a new environment to typeset programs written in the C
language, by using the command \lstnewenvironment:
The command
\lstnewenvironment{name}{starting
code}{ending code} is from the
listings package, with similar semantics.
In the starting code above, the fragment
\setenvclass{lstlisting}{clisting} instructs HEVEA to
use the style class clisting locally (notice that it could just
be another name). The style class clisting is defined in
the document preamble as follows:
Typesetting a C listing with a black border on the left is then as
simple as:
\begin{clisting}
/* Compute, guess what! */
int fact(int n) {
int r = 1 ;
for ( ; n > 0 ; n--) {
r *= n ;
}
return r ;
}
\end{clisting}
The final result is:
/* Compute, guess what! */int fact(int n) {
int r = 1 ;
for ( ; n > 0 ; n--) {
r *= n ;
}
return r ;
}
When listings are framed, that is, when some
frame=… or background=… keyval
specifications are active, they no longer get translated to div
elements.
Instead they get translated to one cell tables whose td
and table elements
are styled through style classes lstlisting and
lstframe, respectively. Of course, those two style classes
follow the usual \setenvclass/\getenvclass mechanism.
That way, one can for instance center all framed listings by issuing
the following declaration in the document preamble:
\newstyle{.lstframe}{margin:auto;}
Notice that the default style class lstframe is empty.
Unfortunately the white-space:pre; style declaration is still a
bit young, and some browsers implement it in rather incomplete
fashion. This is particularly true as regards text copy-pasted from
browser display. In case you want to provide your readers with easy
copy-paste of listings, you can, by issuing the command
\lstavoidwhitepre in the document preamble. Then,
white-space:pre; is not used any longer: spaces get rendered
by non-breaking space entities and line-breaks by <BR> elements,
which significantly increase output size. However, as a positive
consequence, display remains correct and text copy-pasted from browser
display indeed possesses the line-breaks shown in display.
Those two packages provide LATEX users with the
possibility to typeset tabular material over several
pages [LATEX-bis, Section 5.4]. Of course, HEVEA
does not care much about physical pages.
Thus the supertabular
and longtable environments are rendered more or less
as tabular environments inside table environments.
B.17.15 Typesetting inference rules: the
mathpartir package
The mathpartir package, authored by D. Rémy, essentially
provides two features:
An environment mathpar for typesetting a sequence of math formulas in mixed horizontal and vertical mode. The environment selects the best arrangement according to the line width, exactly as paragraph mode does for words.
A command \inferrule (and its starred variant) for
typesetting inferences rules.
We give a short description, focussing on HEVEA-related details.
Users are encouraged to refer to the
original
documentation of the package.
In the following, comments on rule typesetting apply to HEVEA output
and not to LATEX output.
B.17.15.1 The mathpar environment
In its LATEX version, the mathpar environment is a
“paragraph mode for formulas”. It allows to typeset long list of
formulas putting as many as possible on the same line:
\begin{mathpar}
A-Formula \and
Longer-Formula \and
And \and The-Last-One
\end{mathpar}
A−Formula
Longer−Formula
And
The−Last−One
In the example above, formulas are separated with \and. The
LATEX implementation also changes the meaning of paragraph breaks
(either explicit as a \par command or implicit as a blank line)
to act as \and. It also redefines the command \\ as
an explicit line-break in the flow of formulas.
The HEVEA version is simplistic:
Formulas are typeset in math display
mode,
\and separators always produce horizontal space, while
\\ always produce line-breaks.
However, when prefixed by \hva the meaning of explicit
separators is reversed: that is,
\hva\and produces a line-break, while \hva\\
produces horizontal space.
Hence, we can typeset the previous example on two lines:
\begin{mathpar}
A-Formula \and
Longer-Formula \hva\and
And \and The-Last-One
\end{mathpar}
A−Formula
Longer−Formula
And
The−Last−One
It is to be noticed that the LATEX version of the package defines
\hva as a no-op, so as to allow explicit instructions given to
HEVEA not to impact on the automatic typesetting performed by LATEX.
B.17.15.2 The inferrule macro
The \inferrule macro is designed to typeset inference rules. It
should only be used in math mode (or display math mode). It takes
three arguments, the first being optional, specifying the label,
premises, and conclusions respectively. The premises and the
conclusions are both lists of formulas, and are separated by
\\.
A simple example of its use is
\inferrule
[label]
{one \\ two \\ three \\ or \\ more \\ premises}
{and \\ any \\ number \\ of \\ conclusions \\ as \\ well}
which gives the following rendering:
label
onetwothreeormorepremises
andanynumberofconclusionsaswell
Again, HEVEA is simplistic. Where LATEX performs
actual typesetting, interpreting \\ as horizontal or
vertical breaks, HEVEA always interpret \\ as an
horizontal break. In fact HEVEA interpret all separators
(\\, \and) as horizontal breaks, when
they appear in the arguments of the \inferrule command.
Nevertheless prefixing separators with \hva yields vertical
breaks:
\inferrule
{aa \hva\\ bb}
{dd \\ ee \\ ff}
aa
bb
ddeeff
The color of the horizontal rule that separates the premises and
conclusions can be changed by redefining the command
\mpr@hhline@color. This color must be specified as a low-level
color (cf. Section B.14.2.2).
B.17.15.3 Options
By default, lines are centered in inference rules. However, this can be changed either by using \mprset{flushleft} or \mprset{center}, as shown below.
The mathpartir package provides a starred variant
\inferrule*. In LATEX, the boxes
produced by \inferrule and \inferrule* differ as regards
their baseline, the second being well adapted to derivation trees.
All this is irrelevant to HEVEA,
but \inferrule* remains of interest because of its interface:
the optional argument to the \inferrule* command is a list of
key=value pairs in the style of
keyval.
This makes the variant command much more flexible.
key
Effect for value v
before
Execute v before typesetting the rule.
Useful for instance to change the maximal width of the rule.
left
Put a label v on the left of the rule
Left
Idem.
right
As left, but on the right of the rule.
Right
As Left, but on the right of the rule.
lab
Put a label v above the inference rule, in the style
of \inferrule.
Lab
Idem.
vdots
Raise the rule by v and insert vertical dots, the length
argument is translated to a number of line-skips.
Additionally, the value-less key center centers premises and
conclusions (this is
the default), while flushleft commands left alignment of
premises and conclusions (as \mprset{flushleft} does).
Other keys defined by the LATEX package exist and are parsed, but
they perform no operation.
This package should be present in modern latex installations.
Basically, the package defines a boolean register pdf, whose
value is true for tools that produce PDF (such as
pdflatex) and false for tools that produce DVI
(such as latex).
The hevea version of the package simply defines the boolean
register pdf with initial value true. Command-line option
-pdf is also added to imagen command-line
options (by using the command \@addimagenopt, see
Section 10.7). As a result, imagen will
normally call pdflatex in place of latex.
In case standard latex processing in imagen is
wished, one can issue the command \pdffalse after loading the
ifpdf package and before \begin{document}. Then, no
command line option is added.
Hence, to achieve latex processing of the image
file, while still loading the ifpdf package, one writes:
\usepackage{ifpdf}
%HEVEA\pdffalse
B.17.17 Typesetting Thai
HEVEA features an implementation of Andrew Seagar’s technique
for Thai in LATEX,
by the means of the package thai.hva in the distribution.
As regards input encoding, Thai users of HEVEA could (perhaps) use
\usepackage[utf8]{inputenc}.
However, the typesetting of Thai is more subtle than just proper
characters. For that reason, Thai in LATEX is better performed by
another technique, which HEVEA supports. See this specific
document.
B.17.18 Hanging paragraphs
The hanging package is implemented.
HEVEA implementation consists of no-ops, except for the
hangparas environment, which is partially implemented.
Assume the following usage of hangparas:
\begin{hangparas}{wd}{n}
…\end{hangparas}
where wd is a length that makes sense both for LATEX
and CSS (typically 2ex).
Then html output will reproduce LATEX output for n=1, regardless
of the given value of argument n.
That is, in any paragraph inside the environment,
all lines except the first get indented by wd.
B.17.19 The cleveref package
The cleveref package
attempts (and mostly succeeds) typesetting references
cleverly. Its main feature is a \cref command that accepts several,
comma separated, label references and typesets them as a list
(which can be one-element long, of course) prefixed with sectional unit names.
The HEVEA implementation is quite complete, but it does not support some
of the subtleties of the LATEX implementations, especially as regards
customisation.
B.17.20 Other packages
The fancyverb and colortbl
packages are partly implemented.
The xspace package is implemented,
in simple cases, rendering is satisfactory, but beware: HEVEA
differs significantly from TEX, and discrepancies are likely.
Abstract:
HEVEA is a LATEX to
html translator.
The input language is a fairly complete subset of LATEX 2є (old
LATEX style is also accepted) and the
output language is html that is (hopefully) correct with respect to
version 5 [HTML-5a, HTML-5b]
HEVEA understands LATEX macro definitions. Simple user style
files are understood with little or no modifications.
Furthermore, HEVEA customisation is done by writing LATEX code.
HEVEA is written in Objective Caml, as many lexers. It is
quite fast and flexible. Using HEVEA it is possible to translate
large documents such as manuals, books, etc. very quickly. All
documents are translated as one single html file. Then, the output
file can be cut into smaller files, using the companion program HACHA.
HEVEA can also be instructed to output plain text or info files.
This document consists in three parts, a tutorial introduction, a
reference manual and some practical information. The latter part
includes a small index.
Part A
Tutorial
1 How to get started
Assume that you have a file, a.tex, written in LATEX, using the
article, book or report style. Then,
translation
is achieved by issuing the command:
# hevea a.tex
Probably, you will get some warnings. If
HEVEA does not crash, just ignore them for the moment
(Section 4 explains how to correct errors).
If everything goes fine, this will produce a new file,
a.html, which you can visualise through a html browser.
If you wish to experiment HEVEA on small LATEX source fragments,
then launch HEVEA without arguments. HEVEA will read its
standard input and print the translation on its standard output.
For instance:
Incidentally, notice that the symbol “∈” translates to the
appropriate numerical character reference and that the calligraphic
letter “E” renders as a red “E”. You can find some
more elaborate examples in
the on-line documentation.
2 Style files
LATEX style files are files that are not intended to produce output, but
define document layout parameters, commands, environments, etc.
2.1 Standard base styles
The base style of a LATEX document is the argument to the
\documentclass command (\documentstyle in old style).
Normally, the base style of a document defines the structure and
appearance of the whole document.
HEVEA really knows about two LATEX base styles,
article and book.
Additionally, the report base style is recognized and
considered equivalent to book and the
seminar base style for making slides is recognized and
implemented by small additions on the article style.
Base style style is implemented by an HEVEA specific
style file style.hva.
More precisely, HEVEA interprets
\documentclass{style} by attempting to load
the file style.hva (see section C.1.1.1 on where
HEVEA searches for files).
Thus, at the moment, HEVEA distribution includes the files,
article.hva, book.hva, etc.
2.2 Other base styles
Documents whose base style is not recognized by HEVEA can be
processed when the unknown base style is a derivation of a
recognized base style.
Let us assume that doc.tex uses an exotic
base style such as acmconf. Then, typing
hevea doc.tex will yield an error, since
HEVEA cannot find the acmconf.hva file:
# hevea.opt doc.tex
doc.tex:1: Warning: Cannot find file: acmconf.hva
doc.tex:1: Error while reading LaTeX: No base style
Adios
This situation is avoided by invoking HEVEA with the known
base style file article.hva as an extra argument:
# hevea article.hva doc.tex
The extra argument instructs
HEVEA to load its article.hva
style file before processing doc.tex.
It will then ignore the document base style specified by
\documentclass (or \documentstyle).
Observe that the fix above works because the acmconf and
article base styles look the same to the document
(i.e. they define the same macros).
More generally, most base styles that are neither
article nor book are in fact variations
on either two of them.
However, such styles usually provides extra macros.
If users documents use these macros, then users should also instruct
HEVEA about them (see section 4.1).
Finally, it is important to notice that
renaming a base style file style.cls into
style.hva will not work in general.
As a matter of fact, base style files are TEX and not LATEX source and
HEVEA will almost surely fail on TEX-ish input.
2.3 Other style files
A LATEX document usually loads additional style files, by using
the commands \input or \usepackage or \input.
2.3.1 Files loaded with \input
Just like LATEX, HEVEA reacts to the construct
\input{file} by loading the file
file. (if I got it right, HEVEA even follows TEX’s crazy
conventions on .tex extensions).
As it is often the case, assume that the document doc.tex has a
\input{mymacros.tex} instruction in its preamble, where
mymacros.tex gathers custom definitions.
Hopefully, only a few macros give rise to trouble: macros that performs fine
typesetting or TEXish macros.
Such macros need to be rewritten, using basic LATEX
constructs (section 4 gives examples of macro-rewriting).
The new definitions are best collected in a style file,
mymacros.hva for instance.
Then, doc.tex is to be translated by issuing the command:
# hevea mymacros.hva doc.tex
The file mymacros.hva is processed before
doc.tex (and thus before mymacros.tex).
As a consequence of HEVEA behaviour with respect to
definition and redefinition (see section B.8.1),
the macro definitions in mymacros.hva
take precedence over the ones in mymacros.tex, provided
the document original definitions (the ones in
mymacros.tex) are performed by \newcommand
(or \newenvironment).
Another situation is when HEVEA fails to process a whole
style file. Usually, this means that HEVEA crashes on that style
file.
The basic idea is then
to write a mymacros.hva style file that contains alternative
definitions for all the commands defined in mymacros.sty.
Then, HEVEA should be instructed
to load mymacros.hva and not to load mymacros.tex.
This is done by invoking hevea as follows:
# hevea mymacros.hva -e mymacros.tex doc.tex
Of course, mymacros.hva must now contain replacements for
all the useful macros of mymacro.tex.
2.3.2 Files loaded with \usepackage
As far as I know, LATEX reacts to the construct
\usepackage{name} by loading the file
name.sty.
HEVEA reacts in a similar, but different, manner, by
loading the file name.hva.
HEVEA distributions already includes quite a few .hva
implementations of famous packages (see section B.17).
When a given package (say zorglub) is not implemented, the
situation may not be as bad as it may seem first.
Hopefully, you are only using a few commands from package
zorglub, and you feel confident enough to implement
them yourself.
Then, it suffices to put your definitions in file zorglub.hva
and HEVEA will react to \usepackage{zorglub} by loading
zorglub.hva.
See section B.5.2 for the full story on \usepackage.
3 A note on style
3.1 Spacing, Paragraphs
Sequence of spaces normally are translated into one single space.
Newlines in the input document undergo a special treatement.
A newline triggers a special scanning mode that reads all following
spaces and newlines. In case at least one additional newline character
is read, then HEVEA executes the \par command.
Otherwise, HEVEA outputs a single newline character.
This process approximates TEX process for introducting paragraph
breaks and, as a result, empty lines produce paragraph breaks.
Space after commands with no argument is skipped (as in LATEX) —
however this is not true in math mode, as explained in
section 3.2.1.
The following two subsections describe management of paragraphs and
spaces after command sequences in greater detail.
They can be skipped in first reading.
3.1.1 Spurious Paragraphs
Paragraphs are rendered by the means of p elements.
HEVEA is a bit simplistic in breaking paragraphs and spurious paragraphs
may be present in the final html document.
Normally, as HEVEA never outputs p elements whose contents is
made of spaces only, this should not happen very often.
Unfortunately, some commands do not produce any output in LATEX,
while they do produce output in HEVEA: those commands
are \label, \index etc.
HEVEA translates
\label{name} into the anchor
<a id="name"></a>. As a result, the following
source fragment will introduce a spurious paragraph.
This a first paragraph.
\label{label}
This is another paragraph.
Indeed, whe have the following translation:
<p>This a first paragraph.</p>
<p><a id="label"></a></p>
<p>This is another paragraph.</p>
Which your browser renders as follows — with additional borders
emphasizing p elements.
This a first paragraph.
This is another paragraph.
Most of the time, such extra paragraphs remain unnoticed.
Of course, they can be supressed by erasing one of the empty
lines. For instance:
This a first paragraph.
\label{label}
This is another paragraph.
A similar situation occurs when a sectioning command is followed by
\label and a paragraph break:
\section*{A section}\label{section:label}
First paragraph.
Produced html is, after a few cosmetic simplifications:
In all cases, this amounts to avoiding a paragraph whose contents
consists in a sole \label command.
Spurious paragraphs are more easily seen by running hevea
with the command-line option -dv, which instructs
hevea to add border on some of the elements it produces,
including p elements.
3.1.2 Spaces after Commands
Space after commands with no argument is skipped.
Consider the following example:
\newcommand{\open}{(}
\newcommand{\close}{)}
\open text opened by ``\verb+\open+''
and closed by ``\verb+\close+''\close.
We get:
(text opened by “\open” and closed by
“\close”).
In the output above, the space after \open does not
find its way to the output.
More generally,
HEVEA tries to emulate LATEX behaviour in all situations, but
discrepancies probably exist.
Thus, users are invited to make explicit what they want.
This is good practice anyway, because LATEX is mysterious
here. Consider the following example, where the \tryspace
macro is first applied and then expansed by hand:
\newcommand{\bfsymbol}{\textbf{symbol}}
\newcommand{\tryspace}[1]{#1 XXX}
Some space: \tryspace{\bfsymbol}\\
No space: \bfsymbol XXX
Spacing is a bit chaotic here,
the space after symbol remains when #1 is substituted for it
by LATEX (or HEVEA).
Some space
:
symbol XXX
No space
:
symbolXXX
Note that, if a space before “XXX” is wanted, then
one should probably write:
\newcommand{\tryspace}[1]{#1{} XXX}
Finally, whether the tabulation character is a space or not
is random, so avoid tabs in your source document.
3.2 Math mode
HEVEA math mode is not very far from normal text mode, except that
all letters are shown in italics and that space after macros
is echoed.
However, typesetting math formulas in html rises two difficulties.
First, formulas contain symbols, such as Greek letters; second,
even simple formulas do not follow the simple basic typesetting model of html.
3.2.1 Spacing in math mode
By contrast with LATEX, spaces from the input are significant in
math mode, this
feature allows users to instruct HEVEA
on how to put space in their formulas.
For instance, \alpha\rightarrow\beta is typeset without spaces between
symbols, whereas \alpha \rightarrow \beta produces these spaces.
\alpha\rightarrow\beta
:
α→β
\alpha \rightarrow \beta
:
α → β
Note that LATEX ignores spaces in math mode, so that users can
freely adjust HEVEA output without changing anything to LATEX
output.
3.2.2 Symbols
Figure 1: Some symbols
\in:
∈
\notin:
∉
\int:
∫
\prod:
∏
\preceq:
≼
\prec:
≺
\leq:
≤
\geq:
≥
\cup:
∪
\cap:
∩
\supset:
⊃
\subset:
⊂
\supseteq:
⊇
\subseteq:
⊆
With respect to previous versions of HEVEA since the begining, the
treatment of symbols has significantly evolved. Outputting symbols is
now performed by using Unicode character references, an option that
much more complies whith standards than the previous option of
selecting a “symbol” font. Observe that this choice is now
possible, because more and more browsers correctly display such
references. See Figure 1 for a few such symbols.
However, this means that ancient or purposely limited browsers (such as
text-oriented browsers) cannot display maths, as translated by HEVEA.
For authors that insist on avoiding symbols that cannot be shown
by any browser, HEVEA offers a degraded mode that outputs text
in place of symbols.
HEVEA operates in this mode when given the -textsymbols
command-line option. Replacement text is in English.
For instance. the “∈” symbol is replace by “in”.
This is far from being satisfactory, but degraded mode may be
appropriate for documents than contain few symbols.
3.2.3 Displays
Apart from containing symbols, formulas specify strong typesetting
constraints: sub-elements must be combined together following patterns
that departs from normal text typesetting. For instance, fractions
numerators and denominators must be placed one above the other.
HEVEA handles such constraints in display mode only.
The main two operating modes of HEVEA are text mode and
display mode.
Text mode is the mode for typesetting normal text,
when in this mode, text items are echoed one following the other and
paragraph breaks are just blank lines, both in input and output.
The so called displayed-paragraph environments of LATEX (such as
center or quote) are rendered by html block-level
elements (such as div or blockquote).
Rendering is correct becauses both LATEX displayed environments and
html block-level elements start a new line.
Conversly, since opening a html block-level elements means starting
a new line, any text that sould appear inside a paragraph must be
translated using only html text-level elements.
HEVEA chooses to translate in-text formulas that way.
HEVEA display mode allows more control on text placement, since
entering display mode means opening
a html table element and that tables allow to control the
relative position of their sub-elements.
Displays come in two flavor, horizontal displays and vertical
displays.
An horizontal display is a one-row table, while a vertical display is
a one-column table. These tables holds display sub-elements, displays
sub-elements being centered vertically in horizontal display mode and
horizontally in vertical display mode.
Display mode is first opened by opening a displaymath environment
(e.g. by $$
or \[).
Then, sub-displays are opened by LATEX constructs which require
them.
For instance, a displayed fraction (\frac) opens a vertical display.
The distinction between text and display modes clearly appears while
typesetting math formulas.
An in-text formula such as
$\int_1^2 xdx = \frac{3}{2}$ appears as:
∫12xdx =3/2,
while the same formula has a better aspect in display mode:
∫
2
1
xdx =
3
2
As a consequence, HEVEA is more powerful in display mode and
formulas should be displayed as soon as they get a bit complicated.
This rule is also true in LATEX but it is more strict in HEVEA,
since html capabilities to typeset formulas inside text are quite
poor.
In particular, it is not possible to get in-text “real” fractions or
in-text limit-like subscripts.
Users should remember that HEVEA is not TEX or LATEX and that
HEVEA author neither is D. E. Knuth nor L. Lamport.
Thus, some formulas may be rendered poorly.
For instance, two fractions with different denominator and numerator
height look strange.
1
N
∑
i=0
Ui
=
N
∑
i=0
Ui
1
The reason is that vertical displays in an horizontal display are
html tables
that always get centered in the vertical direction.
Such a crude model cannot faithfully emulate any TEX box placement.
Users can get an idea on how HEVEA combines elements in display mode
by giving the -dv command-line option, which
instructs HEVEA to add
borders to the table elements introduced by displays.
3.2.4 Arrays and display mode
By contrast with formulas, which HEVEA attempts to render with
text-level elements only when they appear inside paragraphs, LATEX arrays
always translate to the
block-level element table, thereby introducing non-desired line
breaks before and after in-text arrays.
As a consequence, in-text arrays yield an acceptable output, only while
alone in a paragraph.
Consider the following source:
This is a small array:
\begin{tabular}{|cc|}
\hline item-1 & item-2 \\
\hline\end{tabular}. Next sentence.
We get:
This is a small array:
item-1
item-2
. Next sentence.
However, since in some sense, all html tables are displayed, the
array and tabular environments implicitly open display
mode, thus allowing a satisfactory typesetting of formulas in
arrays. More precisely, array elements whose column format
specification is l, c or r are typeset in display
mode (see section B.10.2).
3.3 Warnings
When HEVEA thinks it cannot translate a symbol or construct
properly, it issues a warning. This draws user attention onto a
potential problem. However, rendering may be correct.
In the following (silly) example, HEVEA gets nervous because of
the complicated length given as argument to \hspace:
\newlength{\mylength}\setlength{\mylength}{5pt}
\begin{tabular}{c@{\hspace{\mylength}}c}
Before & After
\end{tabular}
Note that all warnings can be suppressed with the -s (silent)
option.
When a warning reveals a real problem, it can often be cured by
writing a specific macro. The next two sections introduce HEVEA
macros, then section 4 describes how to proceed with
greater detail.
3.4 Commands
Just like LATEX, HEVEA can be seen as a macro language, macros
are rewritten until no more expansion is possible. Then, either some
characters (such as letters, integers…) are outputed or some
internal operation (such as changing font attributes, or arranging
text items in a certain manner) are performed.
This scheme favors easy extension of program capabilities
by users. However, predicting program behaviour and correcting errors
may prove difficult, since final output or errors
may occur after several levels of macro expansion.
As a consequence, users can tailor HEVEA to their needs, but it
remains a subtle task.
Nevertheless, happy LATEX users should enjoy customizing
HEVEA, since this is done by writing LATEX code.
3.5 Style choices
LATEX and html differ in many aspects. For instance, LATEX allows
fine control over text placement, whereas
html does not.
More symbols and font attributes are available in LATEX than in
html. Conversely, html has font attributes, such as color, which
standard LATEX has not.
Therefore, there are many situations where HEVEA just cannot
render the visual effect of LATEX constructions. Here some choices
have to be made. For instance, calligraphic letters (\mathcal)
are rendered in red.
If you are not satisfied with HEVEA rendering of text style
declarations, then you
can choose your own, by redefining the \cal
macros, using \renewcommand, the macro redefinition operator of
LATEX. The key point is that you need not worry about HEVEA
internals: just redefine the old-LATEX style text-style
declarations (i.e.\it, \sc, etc.) and everything should
get fine:
(See sections 4 and 5 on how to make such
changes while leaving your file processable by LATEX, and
section 10.2 for a more thorough descripton of
customizing type styles).
With such redefinitions, we get:
This is small caps and this is CALLIGRAPHIC LETTERS
Note that many of LATEX commands and environments are defined in the
hevea.hva file that HEVEA loads before processing any
input.
These constructs are written using LATEX source code, in the end they
invoke HEVEA internal commands.
Other LATEX constructs, such as
LATEX key constructs or HEVEA internal commands (see section 8.3),
that require special processing are defined
in HEVEA source code.
However, the vast majority of these definitions can be overridden by a
redefinition.
This may prove useless, since there is little point in
redefining core constructs such as \newcommand for instance.
4 How to detect and correct errors
Most of the problems that occur during the translation of a given
LATEX file (say trouble.tex) can be detected and solved at
the macro-level. That is, most problems induce a macro-related warning
and can be solved by writing a few
macros. The best place for these macros is an user style file (say
trouble.hva) given as
argument to HEVEA.
# hevea trouble.hva trouble.tex
By doing so, the macros written specially for HEVEA are not
seen by LATEX. Even better, trouble.tex is not changed
at all.
A worth-mentiong alternative is inserting \usepackage{trouble}
in the document preamble. Then, given HEVEA semantics for
\usepackage (see Section B.5.2),
HEVEA-specific commands should be placed in
the file “trouble.hva” file, while LATEX-specific commands
should be placed in teh file “trouble.sty”.
Of course, adapting a document to HEVEA processing
will be easier if the LATEX source is written in a
generic style, using macros.
Note that this style is recommended anyway, since it facilitates
document maintenance.
4.1 HEVEA does not know a macro
Consider the following LATEX source excerpt:
You can \raisebox{.6ex}{\em raise} text.
LATEX typesets this as follows:
Since HEVEA does not know about \raisebox,
it incorrectly processes this input. More precisely,
it first prints a warning message:
trouble.tex:34: Unknown macro: \raisebox
Then, it goes on by translating the arguments of \raisebox as if
they were normal text. As a
consequence some .6ex is finally found in the html output:
You can .6exraise text.
To correct this, you should provide a macro that has more or less the effect of
\raisebox. It is impossible to write a generic
\raisebox macro for HEVEA, because of html limitations.
However, in this case, the effect
of \raisebox is to raise the box a little.
Thus, the first, numerical, argument to \raisebox can be
ignored in a private \raisebox macro defined in trouble.hva:
\newcommand{\raisebox}[2]{$^{\mbox{#2}}$}
Now, translating the document yields:
You can raise text a little.
Of course, this will work only when all \raisebox commands in
the document raise text a little. Consider, the following
example, where text
is both raised a lowered a little:
You can \raisebox{.6ex}{\em raise}
or \raisebox{-.6ex}{\em lower} text.
Which LATEX renders as follows:
Whereas, with the above definition of \raisebox, HEVEA produces:
You can raise
or lower text.
A solution is to add a new macro definition in the trouble.hva file:
\newcommand{\lowerbox}[2]{$_{\mbox{#2}}$}
Then, trouble.tex itself has to be modified a little.
You can \raisebox{.6ex}{\em raise}
or \lowerbox{-.6ex}{\em lower} text.
HEVEA now produces a satisfying output:
You can raise
or lower text.
Note that, for the document to remain LATEX-processable,
it should also contain the following definition for
\lowerbox:
\newcommand{\lowerbox}[2]{\raisebox{#1}{#2}}
This definition can safely be placed anywhere in trouble.tex,
since by HEVEA semantics for \newcommand (see
section B.8.1)
the new definition will not overwrite the old one.
4.2 HEVEA incorrectly interprets a macro
Sometimes HEVEA knows about a macro, but the produced html
does not look good when seen through a browser.
This kind of errors is detected while visually checking the
output.
However, HEVEA does its best to issue warnings when such situations
are likely to occur.
Consider, for instance, this definition of \blob as a small
black square.
HEVEA always translates \rule as <hr>, ignoring size
arguments.
Hence, it produces the following, wrong, output:
Blob
We may not be particularily commited to a square blob.
In that case, other small symbols would perfectly do the job
of \blob, such as a bullet (\bullet).
Thus, you may choose to give \blob a definition in
trouble.hva:
\newcommand{\blob}{\bullet}
This new definition yields the following, more satisfying output:
• Blob •
In case we do want a square blob, there are two alternatives.
We can have LATEX typeset some subparts of
the document and then to include them as images, section 6
explains how to proceed.
We can also find a square blob somewhere in the variety of Unicode
(or do I mean ISO 10646?) characters,
and define \blob as a numerical
character reference. Here, the character U+02588
seems ok.
\newcommand{\blob}{\@print@u{X2588}}
█ Blob █
However, beware that not all browsers display all of Unicode…
4.3 HEVEA crashes
HEVEA failure may have many causes, including a bug.
However, it may also stem from a wrong LATEX input.
Thus, this section is to be read before reporting a bug…
4.3.1 Simple cases: LATEX also crashes
In the following source, environments are not properly balanced:
\begin{flushright}
\begin{quote}
This is right-flushed quoted text.
\end{flushright}
\end{quote}
Such a source will make both LATEX and HEVEA choke.
HEVEA issues the following error message that shows the LATEX
environment that is not closed properly:
Thus, when HEVEA crashes, it is a good idea to check that the
input is correct by running LATEX on it.
4.3.2 Complicated cases
Unfortunately, HEVEA may crash on input that does not affect
LATEX.
Such errors usually relate to environment or group nesting.
Consider for instance the following “optimized” version of a
quoteright environment:
\newenvironment{quoteright}{\quote\flushright}{\endquote}
\begin{quoteright}
This a right-flushed quotation
\end{quoteright}
The \quote and \flushright constructs
are intended to replace
\begin{quote} and \begin{flushright},
while \endquote stands for \end{quote}.
Note that the closing \endflushright
is omitted, since it does nothing.
LATEX accepts such an input and produces a right-flushed quotation.
However, HEVEA usually translates LATEX environments to html
block-level elements and it requires
those elements to be nested properly.
Here, \quote translates to <blockquote>,
\flushright translates to <div class="flushright"> and
\endquote translates to </blockquote>.
At that point, HEVEA refuses to generate obviously
non-correct html and it crashes:
Giving up command: \@close
Giving up command: \endquote
Giving up command: \endquoteright
Giving up command: \end
./trouble.tex:7: Environment nesting error: html: 'BLOCKQUOTE' closes 'DIV'
./trouble.tex:5: Latex environment 'quoteright' is pending
Adios
Also notice that the error message above includes a backtrace showing
the call-chain of commands.
In this case, the solution is easy: environments must be opened and
closed consistently. LATEX style being recommended, one should write:
Unclosed LATEX groups ({…) are another source
of nuisance to HEVEA.
Consider the following horreur.tex file:
\documentclass{article}
\begin{document}
In this sentence, a group is opened now {\em and never closed.
\end{document}
LATEX accepts this file, although it produces a warning:
# latex horreur.tex
This is TeX, Version 3.14159 (Web2C 7.2)
...
(\end occurred inside a group at level 1)
Output written on horreur.dvi (1 page, 280 bytes).
By contrast, running HEVEA on horreur.tex yields a fatal error:
# hevea horreur.tex
Giving up command: \@raise@enddocument
Giving up command: \enddocument
Giving up command: \end
./horreur.tex:4: Environment nesting error: Latex env error: 'document' closes ''
./horreur.tex:3: Latex environment '' is pending
Adios
Thus, users should close opening braces where it belongs.
Note that HEVEA error message “Latex environment
’env’ is pending” helps a lot in locating
the brace that hurts.
4.3.3 Desperate cases
If HEVEA crashes on LATEX source (not on TEX source),
then you may have discovered a bug, or this manual is not as complete
as it should.
In any case, please report to Luc.Maranget@inria.fr.
To be useful, your bug report should include LATEX code
that triggers the bug (the shorter, the better) and mention
HEVEA version number.
5 Making HEVEA and LATEX both happy
A satisfactory translation from LATEX to html often requires
giving instructions to HEVEA.
Typically, these instructions are macro definitions and
these instructions should not be seen by LATEX.
Conversely, some source that LATEX needs should not be processed
by HEVEA.
Basically, there are three ways to make input vary according to the
processor, file loading, the hevea package
and comments.
5.1 File loading
HEVEA and LATEX treat files differently. Here is a summary of the main
differences:
LATEX and HEVEA both load files given as arguments to
\input, however when given the option -efilename,
HEVEA does not load filename.
HEVEA loads all files given as command-line arguments.
Both LATEX and HEVEA load style files given as optional
arguments to
\documentstyle and as arguments to \usepackage,
but the files are searched by following different methods and
considering different file extensions.
As a consequence, for having a file latexonly loaded by
LATEX only, it suffices
to use \input{latexonly}
in the source and to invoke HEVEA as follows:
# hevea-elatexonly…
Having heveaonly loaded by HEVEA only is more
simple: it suffices to invoke HEVEA as follows:
# heveaheveaonly…
Finally, if one has an HEVEA equivalent style.hva
for a LATEX style file style.sty,
then one should load the file as follows:
\usepackage{style}
This will result in, LATEX loading style.sty,
while HEVEA loads style.hva.
As HEVEA will not fail in case style.hva does not
exist, this is another method for having a style file loaded by
LATEX only.
Writing an HEVEA-specific file file.hva
is the method of choice for supplying command definitions
to HEVEA only. Users can then be sure that these definitions are
not seen by LATEX and will not get echoed to the image
file (see section 6).
The file file.hva can be loaded by either
supplying the command-line argument
file.hva, or by
\usepackage{file} from inside the document.
Which method is better depends
on whether you choose to override or to replace the document
definition.
In the command-line case,
definitions from file.hva are processed before the
ones from the document and will override them, provided
the document definitions are made using \newcommand (or
\newenvironment).
In the \usepackage case, HEVEA loads file.hva
at the place where LATEX loads file.sty, hence
the definitions from file.hva replace
the definitions from file.sty in the strict sense.
5.2 The hevea package
The hevea.sty style file is intended to be loaded by LATEX
and not by HEVEA.
It provides LATEX with means to ignore or process some parts of the
document.
Note that HEVEA copes with the constructs defined in
the hevea.sty file by default.
It is important to notice that the hevea.sty style file from
the distribution is a package in LATEX 2є terms and that it
is not compatible with old LATEX. Moreover, the hevea
package loads the comment package which must be present.
Also notice that, for compatibility,
HEVEA reacts to
\usepackage{hevea} by loading its own version
of the comment package (Section B.17.6).
5.2.1 Environments for selecting a translator
HEVEA and LATEX perform the following actions on source inside
the latexonly, verblatex, htmlonly, rawhtml,
toimage and verbimage environments:
environment
HEVEA
LATEX
latexonly
ignore, \end{env}
constructs are processed (see section 5.2.2)
It is impossible to avoid the spurious space in HEVEA output
for the source above.
This extra spaces comes from the newline character that follows
\end{htmlonly}. Namely this
construct must appear in a line of its own for
LATEX to recognize it. Anyway, better control over spaces
can be achieved
by using the hevea boolean register
or comments, see sections 5.2.3
and 5.3.
Also note that environments define a scope and that style changes
(and non-global definitions) are local to them. For instance, in the
example above, “…” appears in black in html output.
However, as an exception, the environments image
and verbimage do not create scope.
It takes a little practice of HEVEA to understand why this is
convenient.
5.2.2 Why are there two environments for ignoring input?
Some scanning and analysis of source is performed
by HEVEA inside the latexonly environment, in order to
allow latexonly to dynamically occur inside other environments.
More specifically, \end{env} macros
are recognized and their env argument is tested against
the name of the environment whose opening macro \env
opened the latexonly environment.
In that case, macro expansion of \endenv is performed and
any further occurrence of \end{env’} is tested
and may get expanded if it matches a pending
\begin{env’}
construct.
This enables playing tricks such as:
\newenvironment{latexhuge}
{\begin{latexonly}\huge}
{\end{latexonly}}
\begin{latexhuge}
This will appear in huge font in \LaTeX{} output only.
\end{latexhuge}
LATEX output will be:
While there is no HEVEA output.
Since HEVEA somehow analyses input that is enclosed in the
latexonly environment,
it may choke.
However, this environment is intended to select processing by
LATEX only and might contain arbitrary source code.
Fortunately, it remains possible to have input processed by LATEX
only, regardless of what it is, by enclosing it in the
verblatex environment.
Inside this environment, HEVEA performs no other action
than looking for \end{verblatex}. As a consequence,
the \begin{verblatex} and \end{verblatex} constructs
may only appear in the main flow of text or inside the same macro body,
a bit like LATEX verbatim environment.
Relations between toimage and verbimage are similar.
Additionally, formal parameters #i are replaced by
actual arguments inside the toimage environment
(see end of section 6.3 for an example of this feature).
5.2.3 The hevea boolean register
Boolean registers are provided by the ifthen package
(see [LATEX, Section C.8.5] and section B.8.5 in this
document).
Both the hevea.sty style file
and HEVEA define the boolean register hevea.
However, this register initial value is false for LATEX
and true for HEVEA.
Thus, provided, both the hevea.sty style file and the
ifthen packages are loaded, the “purple rain” example can
be rephrased as follows:
We get:
{\ifthenelse{\boolean{hevea}}{\purple}{}purple rain, purple rain}\ldots
We get:
purple rain, purple rain…
Another choice is using the TEX-style conditional macro
\ifhevea (see Section B.16.1.4):
We get:
{\ifhevea\purple\fi purple rain, purple rain}\ldots
We get: purple rain, purple rain…
5.3 Comments
HEVEA processes all lines that start with %HEVEA, while
LATEX treats these lines as comments.
Thus, this is a last variation on the “purple rain” example:
We get
%HEVEA{\purple
purple rain, purple rain%
%HEVEA}%
\ldots
(Note how comments are placed at the end of some lines to avoid spurious spaces
in the final output.)
We get:
purple rain, purple rain…
Comments thus provide an alternative to loading the
hevea package. For user convenience, comment equivalents to
the latexonly and toimage environment are also provided:
environment
comment
equivalent
\begin{latexonly}… \end{latexonly}
%BEGIN LATEX
…
%END LATEX
\begin{toimage}… \end{toimage}
%BEGIN IMAGE
…
%END IMAGE
Note that LATEX, by ignoring comments, naturally performs the action
of processing text between %BEGIN… and %END… comments. However, no environment is opened and closed and no scope is
created while using comment equivalents.
6 With a little help from LATEX
Sometimes,
HEVEA just cannot process its input, but it remains acceptable to
have LATEX process it, to produce an image from
LATEX output and to include a link to this image into HEVEA
output.
HEVEA provides a limited support for doing this.
6.1 The image file
While outputting doc.html, HEVEA echoes some
of its input to the image file,
doc.image.tex.
Part of this process is done at the user’s request.
More precisely, the following two constructs
send text to the image file:
\begin{toimage} text \end{toimage}
%BEGIN IMAGE text %END IMAGE
Additionally, \usepackage commands, top-level and global
definitions
are automatically echoed to the image file. This enables using
document-specific commands in text above.
Output to the image file builds up a current page, which is flushed
by the \imageflush command.
This command has the following effect: it outputs a strict page break
in the image file, increments the image counter and
output a <img src="pagename.png"> tag in HEVEA
output file, where pagename is build from the image counter
and HEVEA output file name.
Then the imagen script has to be run by:
# imagendoc
This will process the doc.image.tex
file through LATEX,
dvips, ghostscript and a few others tools, which must all be
present (see section C.4.1), finally producing one
pagename.png file per page in the image
file.
The usage of imagen is described at
section C.1.5. Note that imagen is a simple shell
script. Unix users can pass hevea the command-line option
-fix. Then hevea will
itself call imagen, when appropriate.
6.2 A toy example
Consider the “blob” example from section 4.2.
Here is the active part of a blob.tex file:
Observe that the trick can be used to replace missing symbols by small
.png images. However, the cost may be prohibitive, text rendering
is generally bad, fine placement is ignored and font style changes are
problematic.
Cost can be lowered using \savebox, but the other problems remain.
6.3 Including Postscript images
In this section, a technique to transform included Postscript images
into included bitmap images is described.
Note that this technique is used by HEVEA implementation of the
graphics package (see section B.14.1),
which provides a more standard manner to include Postscript images in
LATEX documents.
Included images are easy to manage: it suffices to let LATEX do the
job.
Let round.ps be a Postscript file, which is included as an
image in the source file round.tex (which must load the
epsf package):
\begin{center}
\epsfbox{round.ps}
\end{center}
Then, HEVEA can have this image translated into a inlined (and
centered) .png image by modifying source as follows:
(Note that the round.tex file
still can be processed by LATEX, since comment equivalents
of the toimage environment are used and that
the \imageflush command is inside
a %HEVEA comment — see section 5.3.)
Then, processing round.tex through HEVEA and
imagen yields:
It is important to notice that things go smoothly because the
\usepackage{epsf} command gets echoed to the
image file. In more complicated cases, LATEX may fail
on the image file because it does not load the right
packages or define the right macros.
However, the above solution implies modifying the original LATEX
source code.
A better solution is to define the \epsfbox
command, so that HEVEA echoes \epsfbox and its argument to
the image file and performs \imageflush:
Such a definition must be seen by HEVEA only. So, it is best put
in a separate file whose name is given as an extra argument on
HEVEA command-line (see section 5.1).
Putting it in the document source
protected inside an %HEVEA comment is a bad idea, because it might then get echoed to the image file
and generate trouble when LATEX is later run by imagen.
Observe that the above definition of \epsfbox is a definition
and not a redefinition (i.e.\newcommand is used and not
\renewcommand),
because HEVEA does not know about \epsfbox by default.
Also observe that this not a recursive definition, since
commands do not get expanded inside the toimage environment.
Finally, if the Postscript image is produced from a bitmap, it is
a pity to translate it back into a bitmap.
A better idea is first to generate a PNG file from the bitmap source
independantly
and then to include a link to that PNG file in html output, see
section 8.2 for a description of this more adequate technique.
6.4 Using filters
Some programs extend LATEX capabilities using a filter principle.
In such a scheme, the document contains source fragments for the program.
A first run of the program on LATEX source changes these fragments
into constructs that LATEX (or a subsequent stage in the paper
document production chain, such as dvips) can handle.
Here again, the rule of the game is keeping HEVEA away from the
normal process: first applying the filter, then making HEVEA send
the filter output to the image file, and then having
imagen do the job.
Consider the gpic filter, for making drawings.
Source for gpic is enclosed in .PS….PE,
then the result is available to subsequent LATEX source as a TEX
box \box\graph.
For instance the following source, from a smile.tex file,
draws a “Smile!” logo as a centered
paragraph:
Both the image description (.PS… .PE) and usage (\box\graph)
are for the image file, and they should be
enclosed by %BEGIN IMAGE… %END IMAGE comments.
Additionally, the image link is put where it belongs by an
\imageflush command:
Observe how the -o argument to HEVEA is used and that
imagen argument is HEVEA output basename (see
section C.1.1.2 for the full definition of HEVEA output basename).
In the gpic example, modifying user source cannot be totally avoided.
However, writing in a generic style saves typing.
For instance, users may define the following environment for
centered gpic pictures in LATEX:
The warnings above are normal: they are issued when HEVEA runs
across the LATEX-intended definition of the centergpic
environment and refuses to override its own definition for that
environment.
7 Cutting your document into pieces with HACHA
HEVEA outputs a single .html file. This file can be
cut into pieces at various sectional units by HACHA
7.1 Simple usage
First generate your html document by applying HEVEA:
# hevea doc.tex
Then cut doc.html into pieces by the command:
# hacha doc.html
This will generate a simple root file
index.html.
This root file holds document title, abstract and a simple table of
contents.
Every item in the table of contents contains a link to or into a file
that holds a “cutting” sectional unit.
By default, the cutting sectional unit is section in the
article style and chapter in the book
style.
The name of those files are doc001.html,
doc002.html, etc.
Additionally, one level of sectioning below the cutting unit
(i.e. subsections in the article style and sections in the
book style) is shown
as an entry in the table of contents.
Sectional units above the cutting section (i.e. parts in both
article and book styles) close the current table
of contents and open a new one.
Cross-references are properly handled, that is, the local links generated by
HEVEA are changed into remote links.
The name of the root file can be changed using the
-o option:
# hacha -o root.html doc.html
Some of HEVEA output get replicated in all the files generated by
HACHA.
Users can supply a header and a footer, which will appear at the
begining and end of every page generated by HACHA. It suffices to
include the following commands in the document preamble:
\htmlhead{header} \htmlfoot{footer}
HACHA also makes every page it generates a clone of its input as
regards attributes to the <body ...> opening tag and
meta-information from the <head>… <\head>
block. See section B.2 for examples of this replication
feature.
By contrast, style information specified in the style elements
from rom the <head>… <\head>
block is not replicated. Instead, all style definitions are collected into an
external style sheet file whose name is doc.css,
and all generated html files adopt doc.css as
an external style sheet.
It is important to notice that, since version 1.08, HEVEA produces
a style element by itself, even if users do not explicitely
use styles. As a consequence,
HACHA normally produces a
file doc.css, which should not be forgotten while
copying files to their final destination after a run of HACHA.
7.2 Advanced usage
HACHA behaviour can be altered from the document source, by using
a counter and a few macros.
A document that explicitly includes cutting macros still can be typeset by
LATEX, provided it loads the
hevea.sty style file from the HEVEA distribution.
(See section 5 for details on this style file).
An alternative to loading the hevea package is to put
all cutting instructions in comments starting with %HEVEA.
7.2.1 Principle
HACHA recognizes all sectional units, ordered as follows, from
top to bottom: part, chapter,
section, subsection, subsubsection,
paragraph and subparagraph.
At any point between \begin{document} and
\end{document},
there exist a current cutting sectional unit (cutting unit for short),
a current cutting depth, a root file and an output file.
Table of contents output goes to the root file, normal output goes to
the output file.
Cutting units start a new output file, whereas units comprised between the
cutting unit and the cutting units plus the cutting depth add new
entries in the table of contents.
At document start, the root file and the output file are HACHA
output file (i.e.index.html).
The cutting unit and the cutting depth are set to default values that
depend on the document style.
7.2.2 Cutting macros
The following cutting instructions are for use in the document
preamble. They command the cutting scheme of the whole document:
\cuttingunit
This is a macro that holds the document cutting unit. You can change
the default (which is section in the article style
and chapter in the book style) by doing:
\renewcommand{\cuttingunit}{secname}.
\tocnumber
Instruct HEVEA to put section numbers
into table of content entries.
\notocnumber
Instruct HEVEA not to put
section numbers
into table of content entries. This is the default.
cuttingdepth
This is a counter that holds the document cutting depth.
You can change the default value of 1 by doing
\setcounter{cuttingdepth}{numvalue}.
A cutting depth of zero means no other entries than the cutting units
in the table of contents.
Other cutting instructions are to be used after
\begin{document}. They all generate html comments in HEVEA
output.
These comments then act as instructions to HACHA.
\cuthere{secname}{itemtitle}
Attempt a cut.
If secname is the current cutting unit or
the keyword now, then
a new output file is started and an entry in the current table of contents
is generated, with title itemtitle. This entry holds a link
to the new output file.
If secname is above the cutting unit, then the
current table of contents is closed. The output file is set to the
current root file.
If secname is below the cutting unit and less than the
cutting depth away from it, then an entry is added in the table of
contents.
This entry contains itemtitle and a link to the point where
\cuthere appears.
Otherwise, no action is performed.
\cutdef[depth]{secname}
Open a new table of contents, with cutting depth depth and
cutting unit secname. If the optional depth is absent,
the cutting depth does not change.
The output file becomes the root file.
Result is unspecified if whatever secname expands to is
a sectional unit name above
the current cutting unit, is not a valid sectional unit name or if
depth does not expand to a small positive number.
\cutend
End the current table of contents. This closes the scope of the
previous \cutdef. The cutting unit and cutting depth are
restored.
Note that \cutdef and \cutend must be properly balanced.
Commands \cuthere and \cutend have starred variants,
which behave identically except for footnotes (see 7.3.6).
Default settings work as follows:
\begin{document} performs
\cutdef*[\value{cuttingdepth}]{\cuttingunit}
and \end{document} performs \cutend*.
All sectioning commands perform \cuthere,
with the sectional unit name as first argument and the (optional, if
present) sectioning
command argument (i.e. the section title) as second argument.
Note that starred versions of the sectioning commands also perform
cutting instructions.
7.2.3 Table of links organisation
A table of links generated by HACHA is a list
of links to generated files.
Additionally, some sublists may be present, up to a certain depth.
The items in those sublists are
links inside generated files, they point to sectional unit titles
below the cutting unit, up to a certain depth.
More precisely, let A be a certain sectional unit (e.g.
“part”), let B be just below A
(e.g. “section”),
and let C be just below C (e.g. “subsection”).
Further assume that cutting is performed at level B with a depth of
more than one.
Then, every unit A holds a one or several tables of links
to generated files, and each generated file normally holds a B unit.
Sublists with links to C units inside B units normally appear in the
tables of links of level A.
The command-line options -tocbis
and -tocter instruct hacha
to put sublists at other places.
With -tocbis sublists are duplicated at the beginning
of the B level files; while with -tocter sublist only
appear at the beginning
of the B level files.
In my opinion,
default style is appropriate for documents with short B units;
while -tocbis style
is appropriate for documents with long B units with
a few sub-units; and -tocter style is appropriate
for documents with long B units with
a lot of sub-units.
As you may have noticed, this manual is cut by following the
-tocbis style.
Whatever the style is, if a B unit is cut
(e.g. because its text is enclosed in
\cutdef{C}… \cutend),
then every C unit goes into its own file and there is no sublist
after the relevant B level entry in the A level table of links.
7.2.4 Examples
Consider, for instance, a book document with a long chapter
that you want to cut at the section level, showing subsections:
\chapter{A long chapter}
.....
\chapter{The next chapter}
Then, you should insert a \cutdef at chapter start and a
\cutend at chapter end:
\chapter{A long chapter}
%HEVEA\cutdef[1]{section}
.....
%HEVEA\cutend
\chapter{The next chapter}
Then, the file
that would otherwise contain the long chapter now contains the chapter
title and a table of sections.
No other change is needed, since the command \section already
performs the appropriate \cuthere{section}{...} commands,
which were ignored by default.
(Also note that cutting macros are placed inside %HEVEA comments,
for LATEX not to be disturbed).
The \cuthere macro can be used to put some document parts into
their own file.
This may prove appropriate for long cover pages or abstracts that would
otherwise go into the root file.
Consider the following document:
\documentclass{article}
\begin{document}
\begin{abstract} A big abstract \end{abstract}
...
Then, you make the abstract go to its own file as it was a cutting
unit by typing:
\documentclass{article}
\usepackage{hevea}
\begin{document}
\cuthere{\cuttingunit}{Abstract}
\begin{abstract} A big abstract \end{abstract}
...
(Note that, this time, cutting macros appear unprotected in the
source. However, LATEX still can process the document, since the
hevea package is loaded).
7.2.5 More and More Pages in Output
In some situations it may be appropriate to produce many
pages from one source files.
More specifically, loading the deepcut package will put
all sectioning units of your document (from \part to
\subsection in their own file.
Similarly, loading the figcut package will make all figures
and tables go into their own file.
The figcut package accepts two options, show and
noshow. The former, which is the default, instructs HEVEA
to repeat the caption into the main flow of text, with a link to the figure.
The latter option disables the feature.
7.3 More Advanced Usage
In this section we show how to alter some details of HACHA
behaviour.
This includes controlling output file names and the title of generated
web pages and introducing arbitrary cuts.
7.3.1 Controlling output file names
When invoked as hacha doc.html,
HACHA produces a index.html table of links file that
points into doc001.html,
doc002.html, etc. content files.
This is not very convenient when one wishes to point inside the
document from outside.
However, the \cutname{name} command
sets the name of the current output file name as name.
Consider a document cut at the section level, which contains the
following important section:
\section{Important\label{important} section}
...
To make the important section goes into file important.html,
one writes:
Then, section “Important section” can be referenced from
an HEVEA unaware html page by:
In this document, there is a very
<a href="important.html#important">important section</a>.
If you are reading the html version of this manual, you may check
that you are now reading file cutname.html.
This particular file name has been specified from the source
using \cutname{cutname.html}.
7.3.2 Controlling page titles
When HACHA creates a web page from a given sectional unit,
the title of this page normally is the name of the sectional unit.
For instance, the title of this very page should be
“Cutting your document into pieces with HACHA”.
It is possible to insert some text at the beginning of all page
titles, by using the \htmlprefix command.
Hence, by writing
\htmlprefix{\hevea{} Manual: } in the document,
the title of this page would become:
“HEVEA Manual: Cutting your document into pieces with HACHA”
and the title of all other pages would show the same prefix.
7.3.3 Links for the root file
The command \toplinks{prev}{up}{next} instructs HACHA to put links to a
“previous”, “up” and “next” page in the root file.
The following points are worth noticing:
The \toplink command must appear in the document preamble
(i.e. before \begin{document}).
The arguments
prev, up and next should expand to urls,
notice that these argument are processed (see section 8.1.1).
When one of the expected argument is left empty,
the corresponding link is not generated.
This feature can prove useful to
relate documents that are generated independently by
HEVEA and HACHA.
7.3.4 Controlling link aspect from the document
By default the links to the previous, up and next pages show a small
icon (an appropriate arrow). This can be changed with the command
\setlinkstext{prev}{up}{next},
where prev, up and next are some LATEX
source.
For instance the default behaviour is equivalent to:
Command \setlinkstext behaves as \toplinks does.
That is, it must occur in document preamble, arguments are processed
and empty arguments yield no effect (i.e. defaults apply).
7.3.5 Cutting a document anywhere
Part of a document goes to a separate file when enclosed in a
cutflow environment:
\begin{cutflow}{title}…\end{cutflow}
The content “…” will go into a file of its
own, while
the argument title is used as the title of the introduced
html page.
The html page introduced here does not belong to the normal flow of
text.
Consequently, one needs an explicit reference from the normal flow of text
into the content of the cutflow environment.
This will occur naturally when the content of the cutflow environment.
contains a \label construct.
This look natural in the following quiz example:
\paragraph{A small quiz}
\begin{enumerate}
\item What is black?
\item What is white?
\item What is Dylan?
\end{enumerate}
Answers in section~\ref{answers}.
\begin{cutflow}{Answers}
\paragraph{Quiz answers}\label{answers}
\begin{enumerate}
\item Black is black.
\item White is white.
\item Dylan is Dylan.
\end{enumerate}
\end{cutflow}
However,introducing html hyperlink targets and
references with the \aname and \ahrefloc commands
(see section 8.1.1)
will be more practical most of the time.
The starred variant environment
cutflow* is the same
as cutflow, save for the html header and footer (see
Section 7.1) which are not replicated in the introduced
page.
7.3.6 Footnotes
Footnote texts (given as arguments either to \footnote or
\footnotetext) do not go directly to output.
Instead, footnote texts accumulate internally in a buffer,
awaiting to be flushed.
The flushing of notes is controlled by the means of a current
flushing unit, which is a sectional unit name or
document — a fictional unit above all units.
At any point, the current flushing unit is the value of the
command \@footnotelevel.
In practice, the flushing of footnote texts is performed by two commands:
\flushdef{secname} simply sets
the flushing unit to secname.
\footnoteflush{secname} acts
as follows:
If argument secname is equal to or above the
current flushing unit, then footnote texts are flushed (if any).
In the output, the texts themselves are surrounded by special comments
that tag them as footnote texts and record secname.
Otherwise, no action is performed.
The article style file performs \flushdef{document},
while the book style file performs \flushdef{chapter}.
At the end of processing, \end{document} performs
\footnoteflush{\@footnotelevel}, so as to flush any pending notes.
Cutting commands interact with footnote flushing as follows:
\cuthere{secname}
executes \footnoteflush{secname}.
Remember that all sectioning commands perform
\cuthere with their sectional unit name as argument.
\cutdef{secname}
saves the current flushing unit and buffer on some internal stack,
starts a new buffer for footnote texts, and
sets the current flushing unit to secname
(by performing \flushdef{secname}).
\cutend first flushes any pending texts
(by performing \footnoteflush with the current flushing unit
as argument), and restores the flushing unit and footnote text buffer saved
by the matching \cutdef.
The starred variants \cutdef* and \cutend* perform
no operation that is related to footnotes.
Later, when running across footnote texts in its input file, HACHA
sometimes put notes in a separate file.
More precisely, HACHA has knowledge of the
current cutting level, the current sectional unit where
cuts occur — as given by the relevant \cutdef.
Moreover, HACHA knows the current section level —
that is, the last sectional command processed.
Besides, HACHA extracts the note level from the comments
that surround the notes (as given by the command
\footnoteflush that produced the notes).
Then, HACHA creates a separate file for notes
when the cutting level and the note level differ,
or when the current level is above the cutting level
(e.g. the current level is document while the cutting
level is chapter).
As a result, notes should stay where they are when they occur at the end of
HACHA output file and otherwise go to a separate file.
To make a complicated story even more complicated,
footnotes in minipage environments or in the arguments
to \title or \author have a different, I guess satisfactory,
behaviour.
Given the above description, footnotes are managed by default as follows.
In style article, hevea puts all footnotes
go at the end of the html file.
A later run of hacha creates a separate footnote file.
In style book, footnotes are collected at the end of
chapters. A later run of hacha leaves them where they
are. Footnotes in the title or author names are managed specially,
they will normally appear at the end of the root file.
In case you wish to adopt a book-like behaviour for
an article (footnotes at the end of sections),
it suffices to insert \flushdef{section} in the document
preamble.
We now give a few example of interaction between notes and cutting.
We first consider normal behaviour.
The page you are reading is a section page, since the current
cutting unit is “section”. The current unit is “subsection”.
The following two subsubsections are sent to their own files by
the means of a \cutdef{subsubsection}/\cutend pair.
As a result the text of footnotes appear at the end of the
subsubsection pages.
7.3.7 A cut subsubsection
A note in a subsubsection, flushed at subsubsections.1
The following two subsubsections are sent to their own files by
the means of a \cutdef*{subsubsection}/\cutend* pair.
As a result, the text of footnotes in the subsections appear
at the end of the current section page.3
Another note in a subsubsection, flushed at sections.5
Finally, to send the footnotes in subsubsections
to a separate web page, one should use
a \cutdef{subsubsection}/\cutend pair
(to create a proper buffer for subsubsection notes),
redefine the flushing unit, and flush notes explicitly.
HEVEA output language being html, it is normal for users to insert
hypertext constructs their documents, or to control colours.
8.1 High-Level Commands
HEVEA provides high-level commands for generating
hypertext constructs.
Users are advised to use these commands in the first place,
because it is easy to write incorrect html and that writing
html directly may interfere in nasty ways with HEVEA internals.
8.1.1 Commands for Hyperlinks
A few commands for hyperlink management and included images
are provided, all these
commands have appropriate equivalents defined by the hevea
package (see section 5.2).
Hence, a document that relies on these high-level commands
still can be typeset by LATEX, provided it loads the hevea
package.
Macro
HEVEA
LATEX
\ahref{url}{text}
make text an hyperlink to url
echo text
\footahref{url}{text}
make text an hyperlink to url
make url a footnote to text,
url is shown in typewriter font
\ahrefurl{url}
make url an hyperlink to url.
typeset url in typewriter font
\ahrefloc{label}{text}
make text an hyperlink to label inside the document
echo text
\aname{label}{text}
make text an hyperlink target with label label
echo text
\mailto{address}
make address a “mailto” link to address
typeset address in typewriter font
\imgsrc[attr]{url}
insert url as an image, attr are attributes in the
html sense
do nothing
\home{text}
produce a home-dir url both for output and links, output aspect is: “~text”
It is important to notice that all arguments
are processed.
For instance, to insert a link to
my home page, (http://pauillac.inria.fr/~maranget/index.html),
you should do something like this:
\ahref{http://pauillac.inria.fr/\home{maranget}/index.html}{his home page}
Given the frequency of ~, # etc. in urls,
this is annoying. Moreover, the immediate solution, using \verb,
\ahref{\verb" ... /~maranget/..."}{his home page}
does not work, since LATEX forbids verbatim formatting
inside command arguments.
Fortunately, the url package provides a very convenient
\url command that acts like \verb and can appear in
other command arguments
(unfortunately, this is not the full story, see section B.17.11).
Hence, provided the url package is loaded,
a more convenient reformulation of the example above is:
\ahref{\url{http://pauillac.inria.fr/~maranget/index.html}}{his home page}
Or even better:
\urldef{\lucpage}{\url}{http://pauillac.inria.fr/~maranget/index.html}
\ahref{\lucpage}{his home page}
It may seem complicated, but this is a safe way to have a
document processed both by LATEX and HEVEA.
Drawing a line between url typesetting and hyperlinks is correct,
because users may sometime want urls to be processed and some other
times not.
Moreover, HEVEA (optionally) depends on only one third party package:
url, which is as correct as it can be and well-written.
In case the \url command is undefined
at the time \begin{document} is processed, the commands
\url, \oneurl and \footurl are defined as
synonymous for
\ahref, \ahrefurl and \footahref, thereby
ensuring
some compatibility with older versions of HEVEA.
Note that this usage of \url is deprecated.
8.1.2 html style colours
Specifying colours both for LATEX and
HEVEA should be done using the color package (see
section B.14.2).
However,one can also specify text color using special type style declarations.
The hevea.sty style file
define no equivalent for these declarations, which therefore are for
HEVEA consumption only.
Those declarations follow html conventions for colours.
There are sixteen predefined colours:
Additionally, the current text color can be
changed by the declaration \htmlcolor{number},
where number is a six digit hexadecimal number specifying a
color in the RGB space. For instance, the declaration
\htmlcolor{404040}
changes font color to dark gray,
8.2 More on included images
The \imgsrc command becomes handy when one has images both in
Postscript and GIF (or PNG or JPG) format. As explained in
section 6.3, Postscript images can be included in
LATEX documents by using the \epsfbox command from the
epsf package. For instance, if screenshot.ps is an
encapsulated Postscript file, then a doc.tex document can
include it by:
\epsfbox{screenshot.ps}
We may very well also have a GIF version of the screenshot image
(or be able to produce one easily using image converting tools),
let us store it in a screenshot.ps.gif file.
Then, for HEVEA to include a link to the GIF image in its
output, it suffices
to define the \epsfbox command in the macro.hva file
as follows:
\newcommand{\epsfbox}[1]{\imgsrc{#1.gif}}
Then HEVEA has to be run as:
# hevea macros.hva doc.tex
Since it has its own definition of \epsfbox, HEVEA will
silently include a link the GIF image and not to the Postscript image.
If another naming scheme for image files is preferred, there are
alternatives.
For instance, assume that Postscript files are of the kind
name.ps, while GIF files are of the kind
name.gif.
Then, images can be included using
\includeimage{name}, where
\includeimage is a specific user-defined command:
Note that this method uses the hevea boolean register (see
section 5.2.3).
If one does not wish to load the hevea.sty file,
one can adopt the slightly more verbose definition:
When the Postscript file has been produced by
translating a bitmap file, this simple method of making a bitmap image and
using the \imgsrc command
is the most adequate.
It should be preferred over using the more automated image file
mechanism (see section 6),
which will translate the image back from
Postscript to bitmap format and will thus degrade it.
8.3 Internal macros
In this section a few of HEVEA internal macros are
described.
Internal macros occur at the final expansion stage of HEVEA and
invoke Objective Caml code.
Normally, user source code should not use them, since
their behaviour may change from one version of HEVEA to another and
because using them incorrectly easily
crashes HEVEA.
However:
Internal macros
are almost mandatory for writing supplementary base style files.
Casual usage is a convenient (but dangerous) way to finely control
output (cf. the examples in the next section).
Knowing a little about internal macros helps in understanding how
HEVEA works.
The general principle of HEVEA is that LATEX environments
\begin{env}…
\end{env} get
translated into html block-level elements <block
attributes>… </block>.
More specifically, such block level elements are opened by the
internal macro \@open and closed by the internal macro
\@close.
As a special case, LATEX groups {… }
get translated into html groups, which are shadow block-level
elements with neither opening nor closing tag.
In the following few paragraphs, we sketch the interaction of
\@open…\@close with paragraphs.
Doing so, we intend to warn users about the complexity
of the task of producing correct html, and to encourage
them to use internal macros, which, most of the time, take nasty
details into account.
Paragraphs are rendered by p elements, which are opened and
closed automatically.
More specifically, a first p is opened after
\begin{document}, then paragraph breaks close the active
p and open a new one.
The final \end{document} closes the last p.
In any occasion, paragraphs consisting only of space characters
are discarded silently.
Following html “normative reference [HTML-5a]”, block-level
elements cannot occur inside p; more precisely,
block-level opening tags implicitly close any active p.
As a consequence,
HEVEA closes the active p element when it processes
\@open
and opens a new p when it processes the matching
\@close.
Generally, no p element is opened by default inside block-level
elements, that is, HEVEA does not immediately open p after having
processed \@open.
However, if a paragraph break occurs later, then a new p
element is opened, and will be closed automatically
when the current block is closed.
Thus, the first “paragraph” inside block-level elements
that include several paragraphs is not a p element.
That alone probably prevents the consistent styling
of paragraphs with style sheets.
Groups behave differently, opening or closing them does
not close nor open p elements.
However, processing paragraph breaks inside groups involves temporarily
closing all groups up to the nearest enclosing p, closing it,
opening a new p and finally re-opening all groups.
Opening a block-level element inside a group, similarly
involves closing the active p and opening a new p
when the matching \@close is processed.
Finally, display mode (as introduced by $$) is also
complicated. Displays basically are table elements with one row
(tr), and HEVEA manages to introduce table cells (td)
where appropriate. Processing \@open inside a display
means closing the current cell, starting a new cell, opening the
specified block, and then immediately opening a new display.
Processing the matching \@close closes the internal
display, then the specified block, then the cell and finally opens a
new cell. In many occasions (in particular for groups), either cell
break or the internal display may get cancelled.
It is important to notice that primitive arguments are
processed (except for the \@print primitive, and for some of
the basic style primitives). Thus,
some characters cannot be given directly (e.g. # and
% must be given as \# and \%).
\@print{text}
Echo text verbatim. As a consequence use only ascii
in text.
\@getprint{text}
Process text using a special output mode that strips off
html tags. This macro is the one to use for processed attributes of
html tags.
\@hr[attr]{width}{height}
Output an html horizontal rule, attr is attributes given
directly (e.g. SIZE=3 HOSHADE), while width and
height are length arguments given in the LATEX style
(e.g. 2pt or .5\linewidth).
\@print@u{n}
Output the (Unicode) character “n”, which can
be given either as a decimal number or an hexadecimal number prefixed
by “X”.
\@open{block}{attributes}
Open html block-level element block with attributes
attributes. The block name blockmust be
lowercase.
As a special case block may be the empty string, then a html
group is opened.
\@close{block}
Close html block-level element block.
Note that \@open and \@close must be properly balanced.
\@out@par{arg}
If occurring inside a p element,
that is if a <p> opening tag is active,
\@out@par first closes it (by emitting </p>),
then formats arg, and then re-open a p element.
Otherwise \@out@par simply formats arg.
This command is adequate when
formatting arg produces block-level elements.
Text-level elements are managed differently. They are not seen
as blocks that must be closed explicitly.
Instead they follow a “declaration” style, similar
to the one of LATEX “text-style declarations” — namely,
\itshape, \em etc.
Block-level elements (and html groups)
delimit the effect of such declarations.
\@span{attr}
Declare the text-level element span (with given attributes)
as active.
The text-level element span will get opened as soon as
necessary and closed automatically, when the
enclosing block-level elements get closed.
Enclosed block-level elements are treated properly by closing span
before them, and re-opening span (with given attributes)
inside them.
The following text-level constructs exhibit similar behaviour with respect
to block-level elements.
\@style{shape}
Declare the
text shape shape (which must be lowercase) as active. Text
shapes are known as font style elements (i, tt, etc.;
warning:most of font style elements are depreciated in html5,
and some of them are no longer valid, prefer CSS in span tags)
or phrase elements (em, etc.) in the html terminology.
\@styleattr{name}{attr}
This command generalises both \@span and \@style,
as both a text-level element name name and attributes are specified.
More specifically,
\@span{attr} can be seen as a shorthand for
\@styleattr{span}{attr};
while
\@style{name} can be seen as
a shorthand for
\@styleattr{name}{}.
\@fontsize{int}
Declare
the text-level element span with attribute
style="font-size:font-size" as active.
The argument
int must be a small integer in the range
1,2, … , 7.
hevea computes font-size, a CSS fontsize value,
from int.
More specifically, font-size will
range from x-small to 120% included in
a xx-large, 3 being the default size medium.
Notice that \@fontsize is deprecated in favour of
\@span with proper fontsize declarations:
\@span{style="font-size=xx-small"},
\@span{style="font-size=x-small"},
\@span{style="font-size=small"},
etc.
\@fontcolor{color}
Declare the text-level element span with attribute
"style=color" as active.
The argument color must be a color attribute value in the html
style. That is either one of the sixteen conventional colours
black, silver etc, or a RGB hexadecimal color specification
of the form
#XXXXXX.
Note that the argument color is processed, as a consequence
numerical color arguments should be given as \#XXXXXX.
\@nostyle
Close active text-level declarations and ignore further text-level
declarations.
The effect stops when the enclosing block-level element is closed.
\@clearstyle
Simply close active text-level declarations.
Notice on font styling with CSS
The preferred way to style text in new versions of the html “standard”
is using style-sheet specifications. Those can be given as argument to
a “style” attributes of html elements, most noticeably
of the span elements.
For instance, to get italics in old versions of html one used
the text-level “i” element as in
<i>…</i>. Now, for the same results of getting
italics one may write:
<span style="font-style:italic">…</span>.
An indeed hevea styles text in that manner,
starting from version 2.00.
Such (verbose) declarations are then abstracted into style class declarations
by HEVEA optimiser esponja, which is invoked by hevea
when given option “-O”.
Notice that style attributes can be given to elements other than span.
However, combining style attributes requires a little care as only one style
attribute is allowed.
Namely <cite style="font-weight:bold" style="color:red">
is illegal and should be written
<cite style="font-weight:bold;color:red">.
For instance:
Das Kapital.
The command \@addtyle can be handy for adding style to
already style elements:
\@addstyle{name:val}{attrs}
Echo the space-separated attributes attrs of a tag with the
name:val style declaration added to these attributes. The
style attribute is added if necessary. Examples:
\@addstyle{color:red}{href="#"} will produce
href="#" style="color:red", and
\@addstyle{color:red}{href="#" style="font-style:italic"} will
produce href="#" style="font-style:italic;color:red". Note
that an unnecessary extra space can be added in some cases.
As an example, consider the following definition of a command
for typesetting citation in bold, written directly in html:
The purpose of the optional argument is to add style to specific citations,
as in:
Two fundamental works: \styledcite{The Holy Bible} and
\styledcite[color:red]{Das Kapital}.
We get: Two fundamental works: The Holy Bible and
Das Kapital.
Notice that the example is given for illustrating the usage of the
\@addstyle macros, which is intended for package writers.
A probably simpler way to proceed would be to use
LATEX text-style declarations:
\newcommand{styledcite}[2][]{{\@style{cite}#1\bf{}#2}}
Two fundamental works: \styledcite{The Holy Bible} and
\styledcite[\color{red}]{Das Kapital}.
We get:
Two fundamental works: The Holy Bible and
Das Kapital.
8.4 The rawhtml environment
Any text enclosed between \begin{rawhtml} and
\end{rawhtml} is echoed verbatim into the html output file.
Similarly, \rawhtmlinput{file} echoes the
contents of file file.
In fact, rawhtml is the environment counterpart of the
\@print command, but experience showed it to be much more
error prone.
When HEVEA was less sophisticated then it is now,
rawhtml was quite convenient.
But, as time went by,
numerous pitfalls around rawhtml showed up. Here are a few:
Verbatim means that no translation of any kind is performed. In
particular, be aware that input encoding (see B.17.4) does
not apply. Hence one should use ascii only, if needed
non-ascii characters can be given as
entity or numerical character references — e.g.é or é for é.
The rawhtml
environment should contain only html text that makes sense alone.
For instance, writing
\begin{rawhtml}<table>\end{rawhtml}…
\begin{rawhtml}</table>\end{rawhtml} is
dangerous, because HEVEA is not informed about opening and closing
the block-level element table. In that case, one should use
the internal macros \@open and \@close.
\begin{rawhtml}text\end{rawhtml} fragments that
contain block-level elements will almost certainly mix poorly with
p elements (introduced by paragraph breaks) and with active
style declaration (introduced by, for instance, \it).
Safe usage will most of the time means using the internal macros
\@nostyle and \@out@par.
When HEVEA is given the command-line option -O,
checking and optimisation of text-level elements in the whole document
takes place. As a consequence, incorrect html introduced by using
the rawhtml environment may be detected at a later stage,
but this is far from being certain.
As a conclusion, do not use the rawhtml environment!
A much safer option is to use the htmlonly environment
and to write LATEX code.
For instance, in place of writing:
\begin{rawhtml}
A list of links:
<ul>
<li><a href="http://www.apple.com/">Apple</a>.
<li><a href="http://www.sun.com/">Sun</a>.
</ul>
\end{rawhtml}
One can write:
\begin{htmlonly}
A list of links:
\begin{itemize}
\item \ahref{http://www.apple.com/}{Apple}.
\item \ahref{http://www.sun.com/}{Sun}.
\end{itemize}
\end{htmlonly}
If HEVEA is targeted to text or info files (see
Section 11).
The text inside rawhtml environments is ignored.
However there exists a rawtext environment (and a
\rawtextinput command) to echo text verbatim in text or info
output mode.
Additionally, the raw environment and a \rawinput
command echo their contents verbatim, regardless of HEVEA output
mode. Of course, when HEVEA produces html,
the latter environment and command suffer from
the same drawbacks as rawhtml.
8.5 Examples
As a first example of using internal macros, consider the following
excerpt from the hevea.hva file that
defines the center environment:
Notice that the code above is no longer present and is given here
for explanatory purpose only.
Now HEVEA uses style-sheets and the actual definition of the
center environment is as follows:
Basically environments \begin{center}…\end{center} will, by
default, be translated into blocks
<div class="center">…</div>.
Additionally, the style class associated to center environments
is managed through an indirection, using the
commands \setenvclass and \getenvclass.
See section 9.3 for more explanations.
Another example is the definition of the \purple
color declaration (see section 8.1.2):
\newcommand{\purple}{\@fontcolor{purple}}
HEVEA does not feature all text-level elements by default.
However one can easily use them with internal macros.
For instance this is how you can make all emphasised text blink:
Here, \@print and \@getprint are used to output
html text, depending upon whether this text requires processing or not.
Note that \@open{img}{src="#1"} is not correct,
because the element img consists in a single tag, without a
closing tag.
Another interesting example is the definition of the command
\@doaelement,
which HEVEA uses internally to output A elements.
The command \@doaelement takes two arguments: the first
argument contains the opening tag attributes; while the second element is
the textual content of the A element.
By contrast with the \imgsrc example above,
tags are emitted inside groups where styles are cancelled by using the
\@nostyle declaration.
Such a complication is needed, so as to avoid breaking proper nesting
of text-level elements.
Here is another example of direct block opening.
The bgcolor environment from the color package
locally changes background color (see section B.14.2.1).
This environment is defined as follows:
The bgcolor environment operates by opening a html table
(table) with only one row (tr) and cell (td) in
its opening command, and closing all these elements in its closing
command. In my opinion, such a style of opening block-level elements
in environment opening commands and closing them in environment
closing commands is good style.
The one cell background color is forced with a background-color
property in a style attribute.
Note that the mandatory argument to \begin{bgcolor} is the
background color expressed as a high-level color, which therefore
needs to be translated into a low-level color by using the
\@getcolor internal macro from the color package.
Additionally, \begin{bgcolor} takes html attributes
as an optional argument. These attributes are the ones of the
table element.
If you wish to output a given Unicode character whose value you know,
the recommended technique is to define an ad-hoc command
that simply call the \@print@u command.
For instance, “blackboard sigma” is Unicode U+02140 (hexa).
Hence you can define the command \bbsigma as follows:
\newcommand{\bbsigma}{\@print@u{X2140}}
Then, “\bbsigma” will output “⅀”
8.6 The document charset
According to standards, as far as I understand them, html pages are
made of Unicode (ISO 10646) characters.
By contrast, a file in any operating system is usually considered as
being made of bytes.
To account for that fact, html pages usually specify a document
charset that defines a translation from a flow of bytes to a flow of
characters.
For instance, the byte
0xA4 means Unicode 0x00A4 (¤) in the
ISO-8859-1 (or latin1) encoding, and 0x20AC (€) in
the ISO-8859-15 (or latin9) encoding.
Notice that HEVEA has no difficulty to output both symbols, in fact
they are defined as Unicode characters:
But the \@print@u command may output the specified character as
a byte, when possible, by the means of the output translator.
If not possible, \@print@u outputs a numerical character
references (for instance €).
Of course, the document charset and the output translator
must be synchronised. The command \@def@charset takes a
charset name as argument and performs the operation of specifying the
document character set and the output translator. It should occur in
the document preamble.
Valid charset names are ISO-8859-n where n is a
number in 1…15,
KOI8-R, US-ASCII (the
default),
windows-n where n is
1250, 1251, 1252 or 1257,
or macintosh, or UTF-8.
In case those charsets do not suffice, you may ask the author for
other document charsets. Notice however that document charset is not
that important, the default US-ASCII works everywhere!
Input encoding of source files is another, although
related, issue — see Section B.17.4.
If wished so, the charset can be extracted from the current
locale environment, provided this yields a valid (to HEVEA) charset name.
This operation is performed by a companion script: xxcharset.exe.
It thus suffices to launch HEVEA as:
# hevea -exec xxcharset.exeother arguments
9 Support for style sheets
9.1 Overview
Starting with version 1.08, HEVEA offers support for style sheets
(of the CSS variant see [CSS-2]).
Style sheets provide enhanced expressiveness. For instance, it is now possible
to get “real” (whatever real means here) small caps in html, and in a
relatively standard manner. There are other, discrete, maybe
unnoticeable, similar enhancements.
However, style sheets mostly offer an additional mechanism to
customise their documents to HEVEA users. To do so, users should
probably get familiar with how HEVEA uses style sheets in the first
place.
HEVEA interest for style sheets is at the moment confined to
block-level elements (div, table, H<n>,
etc.).
The general principle is as follows: when a command or an
environment gets translated into a block-level element,
the opening tag of the block level element has a
class="name" attribute, where name is the
command or environment name.
As an example the LATEX command \subsection
is implemented with the element h3, resulting in
html output of the form:
<h3 class="subsection">
...
</h3>
By default, most styles are undefined, and default rendering of
block-level elements applies. However, some packages (such as, for
instance fancysection, see Section B.16.4) may
define them.
If you wish to change the style of section headers, loading the
fancysection package may prove appropriate (see B.16.4).
However, one can also proceed more directly, by appending new
definitions to the document style
sheet, with the command \newstyle.
For instance, here is a \newstyle to add style for subsections.
This declaration adds some style element to the
subsection class (notice the dot!):
blocks that declare to belong to the class
will show dark-blue text, some padding
(space inside the box) is added and a border will be drawn around the block.
These specification will normally affect all subsections in the document.
Given the previous style definition, the sectioning command
\subsection*{A styled subsection heading}
should yield:
A styled subsection heading
The following points are worth noticing:
To yield some effect, \newstyle commands must appear
in the document preamble, i.e. before \begin{document}.
Arguments to \newstyle commands are processed.
The hevea package defines all style sheet related
commands as no-ops. Thus, these commands do not affect
document processing by LATEX.
9.2 Changing
the style of all instances of an environment
In this very document, all verbatim environments appear over
a light green background, with small left and right margins.
This has been performed by simply issuing the following command in
the document preamble.
Observe that, in the explicit numerical color argument above, the
hash character “#” has to be escaped.
9.3 Changing the style of some instances of an environment
One can also change the style class attached to a given instance of
an environment and thus control styling of environments more precisely.
As a matter of fact, the name of the class attribute of
environment env is referred to through an indirection, by
using the command \getenvclass{env}.
The class attribute can be changed with the command
\setenvclass{env}{class}.
The \setenvclass command internally defines a command
\env@class, whose content is read
by the \getenvclass command. As a consequence, the class
attribute of environments follows normal scoping rules.
For instance, here is how to change the style of oneverbatim
environment.
{\setenvclass{verbatim}{myverbatim}
\begin{verbatim}
This will be styled through class 'myverbatim', introduced by:
\newstyle{.myverbatim}
{margin:1ex 3x;padding:1ex;
color:maroon;
background:\@getstylecolor[named]{Apricot}}
\end{verbatim}}
Observe how the class of environment verbatim is changed from
its default value to the
new value myverbatim. The change remains active until the
end of the current group (here, the “}” at the end). Then, the class
of environment verbatim is restored to its default value
— which happen to be verbatim.
This example also shows two new ways to specify colours in style
definition, with a
conventional html color name (here maroon) or as
a high-level color (see Section B.14.2), given as an argument to
the \@getstylecolor internal command
(here Apricot from the named color model).
A good way of specifying style class changes probably is by defining
new environments.
Then, we can use \begin{flashyverbatim}…
\end{flashyverbatim} to get verbatim environments style with
the intended myverbatim style class.
This text is typeset inside the environment
\emph{flashyverbatim}, and hence with the \emph{myverbatim}
style.
9.4 Which class affects what
Generally, the styling of environment env is performed through
the commands
\getenvclass{env}
and \setenvclass{env}{…},
with \getenvclass{env} producing the
default value of env.
Concretely, this means that most of the environments are styled through
an homonymous style class. Here is a non-exhaustive list of such
environments
All sectioning commands (\part, \section etc.)
output H<n> block-level elements, which are styled
through style classes named part, section, etc.
List making-environment introduce extra style classes for items.
More specifically, for list-making environments
itemize and enumerate,
li elements are styled as follows:
That is, li elements are styled as environments, the key name
being li-env.
The description, trivlist and list environments
(which all get translated into DL elements) are styled in
a similar way, internal DT and DD elements being
styles through names dt-env and
dd-env respectively.
9.5 A few examples
9.5.1 The title of the document
The command \maketitle formats the document
title within a table element, with
class title, for display. The name of the title is displayed
inside block h1, with class titlemain, while all other
information (author, date) are displayed inside block h3, with class
titlerest.
will normally produce a title in dark blue, centered in a box, with
author and date in small-caps.
Title
Date
Author
9.5.2 Enclosing things in a styled div
At the moment, due to the complexity of the task, environments
tabular and array cannot be styled as others
environments can be,
by defining an appropriate class in the preamble.
However, even for such constructs,
limited styling can be performed, by using
the divstyle environment.
The opening command \begin{divstyle}{class}
takes the name of a class as
an argument, and translates to <div class="class">.
Of course the closing command \end{divstyle} translates to
</div>.
The limitation is that the enclosed part may generate more html
blocks, and that not all style attribute defined in class class
class will apply to those inner blocks.
As an example consider the style class definition below.
The intended behaviour is to add a black border around the inner block
(with some padding), and to have maroon text over
a light brown background.
If we, for instance, enclose an itemize environment, the
resulting effect is more or less what we have expected:
\begin{divstyle}{ruled}
\begin{itemize}
\item A ruled itemize
\item With two items.
\end{itemize}
\end{divstyle}
A ruled itemize
With two items.
However, enclosing a centered
tabular environment in a divstyle{ruled} one
is less satisfactory.
\begin{divstyle}{ruled}
\begin{center}\begin{tabular}{|c|c|}
\hline \bf English & \bf French\\ \hline
Good Morning & Bonjour\\ Thank You & Merci\\ Good Bye & Au Revoir\\ \hline
\end{tabular}\end{center}
\end{divstyle}
English
French
Good Morning
Bonjour
Thank You
Merci
Good Bye
Au Revoir
In the html version of this document,
one sees that the brown background extend on all the width
of the displayed page.
This problem can be solved by introducing an extra table.
We first open an extra centered table and then only open the
divstyle environment.
\begin{center}\begin{tabular}{c}
\begin{divstyle}{ruled}
\begin{tabular}{|c|c|}
\hline \bf English & \bf French\\ \hline
Good Morning & Bonjour\\ Thank You & Merci\\ Good Bye & Au Revoir\\
\hline
\end{tabular}
\end{divstyle}
\end{tabular}\end{center}
This works because of the rules that
govern the width of html table elements, which yield
minimal width. This trick is used in
numerous places by HEVEA, for instance in document titles, and looks
quite safe.
English
French
Good Morning
Bonjour
Thank You
Merci
Good Bye
Au Revoir
Another solution is to specify the display property
of the styling div block as being inline-block:
Our idea is highlight lists with a left border whose color fades
while lists are nested.
Such a design may be appropriate for tables of content, as
the one of this document.
Part A
Chapter I
Section I.1
Section I.2
Chapter II
Section II.1
Section II.2
Chapter III
Part B
Chapter IV
Section IV.1
Section IV.1.a
Section IV.1.b
Section IV.2
Chapter V
The text above is typeset from the following LATEX source.
For simplicity, we assume a limit of four over the nesting depth of
toc environment.
We first define four style classes toc1, toc2,
toc3 and toc4 in the document preamble.
Since those classes are similar, a command \newtocstyle is
designed.
HACHA now produces an additional file: a style sheet, which is
shared by all the html files produced by HACHA.
Please refer to section 7.1 for details.
9.6.2 Producing an external style sheet
By default, style declarations defined with
\newstyle go into the header of the html document
doc.html.
However, one can send those declaration into an external style file,
whose name is doc.css.
Then, HEVEA automatically relates doc.html to
its style sheet doc.css.
To achieve this behaviour, it suffices to set the value of the boolean
register externalcss to true, by issuing the command
\externalcsstrue in the preamble of the source document.
Notice that HEVEA output still can be processed by HACHA, with
correct behaviour.
9.6.3 Linking to external style sheets
The HEVEA command \loadcssfile{url} allows the
user to link to an external style sheet (like the link option for
HTML). The command takes an url of the external
sheet as argument and emits the HTML text to
link to the given external style sheet. As an example, the command
\loadcssfile{../abc.css}
produces the following html text in the head of the document.
To yield some effect, \loadcssfile must appear in the document
preamble. Several \loadcssfile commands can be issued. Then
the given external style sheets appear in the output, following source
order.
Notice that the argument to \loadcssfile is processed. Thus, if it
contains special characters such as “#” or “$”, those must be specified
as \# and \$ respectively.
A viable alternative would be to quote
the argument using the \url command from the url
package (see Section B.17.11).
9.6.4 Limitations
At the moment, style class definitions cumulate, and appear
in the style element in the order they are given in the
document source. There is no way to cancel the default class
definitions performed by HEVEA before it starts to process the
user’s document.
Additionally, external style sheets specified with \loadcssfile
appear before style classes defined with \newstyle.
As a consequence (if I am right), styles
declared by \newstyle take precedence over those contained in
external style sheets. Thus, using external style-sheets, especially
if they alter the styling of elements, may produce awkward results.
Those limitations do not apply of course to style classes whose
names are new, since there cannot be default definitions for them.
Then, linking with external style sheets can prove useful to
promote uniform styling of several documents produced by HEVEA.
10 Customising HEVEA
HEVEA can be controlled by writing LATEX code. In this section,
we examine how users can change HEVEA default behaviour or add
functionalities. In all this section we assume that a document
doc.tex is processed, using a private command file
macros.hva. That is, HEVEA is invoked as:
# hevea macros.hva doc.tex
The general idea is as follows: one redefines LATEX constructs in
macros.hva, using internal commands. This requires a good
working knowledge of both LATEX and html.
Usually, one can avoid internal commands, but then, all command
redefinitions interact, sometimes in very nasty ways.
10.1 Simple changes
Users can easily change the rendering of some constructs. For
instance, assume that all quotations in a text should be
emphasised. Then, it suffices to put the following re-declaration in
macros.hva:
In some sense, this second
solution is easier, when one already knows
how to customise LATEX. However, this is less safe, since the definition of
\em can be changed elsewhere.
There is yet another solution that takes advantage of style sheets.
One can also add this line to the macros.hva file:
\newstyle{.quote}{font-style:oblique;}
This works because the environment quote is styled through
style class quote (see Section 9.2).
Notice that this solution has very little to do with
“emphasising” in the proper sense, since here we
short-circuit the implicit path from \em to oblique fonts.
10.2 Changing defaults for type-styles
HEVEA default rendering of type style changes is described in
section B.15.1.
For instance, the following example shows the default rendering
for the font shapes:
By default, \itshape is italics, \slshape is oblique
italics, \scshape is small-caps (thanks to style sheets) and \upshape is no style at all.
All shapes are mutually exclusive, this means that each shape
declaration cancels the effect of other active shape declarations.
For instance, in the example, small caps shapes is small caps (no italics here).
italic shape slanted shape
small caps shape upright shape
If one wishes to change the rendering of some of the shapes (say slanted
caps), then one should redefine the old-style \sl declaration.
For instance, to render slanted as Helvetica (why so?), one should
redefine \sl by \renewcommand{\sl}{\@span{style="font-family:Helvetica"}} in
macros.hva.
And now, the shape example above gets rendered as follows:
italic shape slanted shape
small caps shape upright shape
Redefining the old-style \sl is compatible with the cancellation
mechanism, redefining \slshape is not.
Thus, redefining directly LATEX 2є \slshape with
\renewcommand{\slshape}{} would yield:
italic shape slanted shape
small caps shape upright shape
Hence, redefining old-style declarations using internal commands
should yield satisfactory output.
However, since cancellation is done at the html
level, a declaration belonging to one component may sometimes cancel the
effect of another that belongs to another component.
Anyway, you might have not noticed it if I had not told you.
10.3 Changing the interface of a command
Assume for instance that the base style of doc.tex is
jsc (the
Journal of Symbolic Computation style for articles).
For running HEVEA, the jsc style can be replaced by
article
style, but for a few commands whose calling interface is changed.
In particular, the \title command
takes an extra optional argument (which HEVEA should ignore
anyway).
However, HEVEA can process the document as it stands.
One solution to insert the following lines into macros.hva:
\input{article.hva}% Force document class 'article'
\let\oldtitle=\title
\renewcommand{\title}[2][]{\oldtitle{#2}}
The effect is to replace \title by a new command which
calls HEVEA \title with the appropriate argument.
10.4 Checking the optional argument within a command
HEVEA fully implements LATEX 2є \newcommand.
That is, users can define commands with an optional argument.
Such a feature permits to write a \epsfbox command that
has the same interface as the LATEX command and
echoes itself as it is invoked to the image file.
To do this, the HEVEA \epsfbox command has to check
whether it is invoked with an optional argument or not.
This can be achieved as follows:
Semi-automatic generation of included images is described in
section 6.
Links to included images are generated by the \imageflush
command, which calls the \imgsrc command:
That is, you may supply a html-style attribute to the included image,
as an optional argument to the \imageflush command.
By default, images are PNG images stored in .png files.
HEVEA provides support for the alternative GIF image file format.
It suffices to invoke hevea as:
# hevea gif.hvadoc.tex
Then imagen must be run with option -gif:
# imagen -gifdoc
A convenient alternative is to invoke hevea as:
# hevea -fix gif.hvadoc.tex
Then hevea will invoke imagen with the appropriate
option when it thinks images need to be rebuild.
10.6 Storing images in a separate directory
By redefining the \heveaimagedir command, users can specify a
directory for images.
More precisely, if the following redefinition occurs in the document
preamble.
\renewcommand{\heveaimagedir}{dir}
Then, all links to images in the produced html file will be as
“dir/…”.
Then imagen must be invoked with option -
todir:
# imagen -todirdirdoc
As usual, hevea will invoke imagen with the
appropriate option, provided it is passed the -fix option.
10.7 Controlling imagen from document source
The internal command
\@addimagenopt{option} add
the text option to imagen command-line options, when
launched automatically by hevea (i.e. when
hevea is given the -fix command-line option).
For instance, to instruct hevea/imagen to
reduce all images by a factor of √2, it suffices to state:
%HEVEA\@addimagenopt{-mag 707}
See section C.1.5 for the list of command-line options
accepted by imagen.
11 Other output formats
It is possible to translate LATEX file into other formats than
html. There are two such formats: plain text and info files.
This enables producing postscript,
html, plain text and info manuals from one (LATEX) input file.
11.1 Text
The LATEX file is processed and converted into a plain text
formatted file. It allows some pretty-printing in plain text.
To translate into text, invoke HEVEA as follow:
# hevea -text [-w <width>] myfile.tex
Then, HEVEA produces myfiles.txt a plain text translation
of myfile.tex.
Additionally, the optional argument -w <number> sets the
width of the output for text formatting. By default, The text will be
72 characters wide.
Nearly every environment has been translated, included lists and tables.
The support is nearly the same as in html, excepted in some cases
described hereafter.
Most style changes are ignored, because it is hardly
possible to render them in plain text. Thus, there are no italics,
bold fonts, underlinings, nor size change or colours…
The only exception is for the verbatim environment
that puts the text inside quotes, to distinguish it more easily.
Tables with borders are rendered in the same spirit as in LATEX.
Thus for instance, it is possible to get vertical lines between some
columns only.
Table rendering can be poor in case of line overflow.
The only way to correct this (apart from changing the tables
themselves) is to adjust the formatting width, using the
the -w command-line option.
For now, maths are not supported at all in text mode. You can get very weird
results with in-text mathematical formulas.
Of course, simple expressions such as subscripts remains readable.
For instance, x2 will be rendered as x^2, but ∫01f(x)dx will
yield something like : int01f(x)dx.
11.2 Info
The file format info is also supported.
Info files are text files with limited hypertext links, they
can be read by using emacs info mode or the
info program.
Please note that HEVEA translates plain LATEX to info, and not
TeXinfo.
You can translate your LATEX files into info file(s) as follows:
# hevea -info [-w <width>] myfile.tex
Then, HEVEA produces the file myfile.info, an info
translation of myfile.tex.
However, if the resulting file is too large, it is cut into pieces
automatically,
and myinfo.info now contains references for all
the nodes in the others files, which are named myfile.info-1,
myfile.info-2,…
The optional argument -w has the same meaning as for text output.
The text will be organised in nodes that follow
the pattern of LATEX sectioning
commands. Menus are created to navigate through the sections easily
A table of content is produced automatically.
References, indexes and footnotes are supported, as they are in
html mode.
However, the info format only allows pointers to info nodes,
i.e. in HEVEA case, to sectional units.
As a consequence all cross references lead to sectional unit headers.
Part B
Reference manual
This part follows the pattern of the LATEX reference
manual [LATEX, Appendix C].
B.1 Commands and Environments
B.1.1 Command Names and Arguments
LATEX comments that start with “%” and end at end of line are ignored and produce no output.
Usually, HEVEA ignore such comments. However, HEVEA processes
text that follows “%HEVEA” and some other comments have a specific meaning to it (see
section 5.3).
Command names follow strict LATEX syntax. That is, apart from
#, $, ~, _ and ^, they either are
“\” followed by a single non-letter character or
“\” followed by a sequence of letters.
Additionally, the letter sequence may be preceded by “@”
(and this is the case of many of HEVEA internal commands), or
terminated by “*” (starred variants are implemented as plain
commands).
Users are strongly advised to follow strict LATEX syntax for
arguments. That is, mandatory arguments are enclosed in curly braces
{… } and braces inside arguments must be properly
balanced.
Optional arguments are enclosed in square brackets […
].
However, HEVEA does its best to read arguments even when they are
not enclosed in curly braces.
Such arguments are a single, different from “\”, “{”
and “”, character or
a command name.
Thus, constructs such as \'ecole,
$a_1$ or $a_\Gamma$ are
recognized and processed as école a1 and aΓ.
By contrast, a^\mbox{...} is not recognized
and must be written a^{\mbox{...}}.
Also note that, by contrast with LATEX, comments are parsed during
argument scanning, as an important consequence brace nesting is also
checked inside comments.
With respect to previous versions,
HEVEA has been improved as regards emulation of complicated
argument passing. That is,
commands and their arguments can now appear in
different static text bodies. As a consequence,
HEVEA correctly processes the following source:
\newcommand{\boite}{\textbf}
\boite{In bold}
The definition of \boite makes it reduces as
\textbf and HEVEA succeeds in fetching the argument
“{In bold}”. We get
In bold
The above example arguably is no “legal” LATEX,
but HEVEA handles it.
Of course, there remains
numerous “clever” LATEX tricks that exploits TEX internal
behaviour, which HEVEA does not handle.
For instance consider the following source:
\newcommand{\boite}[1]{\textbf#1}
\boite{{In bold}, Not in Bold.}
LATEX typesets the text “In bold” using bold font, leaving
the rest of the text alone. While HEVEA typesets everything using
bold font. Here is HEVEA output:
In bold, Not in Bold.
Note that, in most similar situations, HEVEA will likely crash.
As a conclusion of this important section,
Users are strongly advised to use ordinary command names and
curly braces and not to think too much the TEX way.
B.1.2 Environments
Environment opening and closing is performed like in LATEX, with
\begin{env} and
\end{env}.
The *-form of an environment is a plain environment.
It is not advised to use \env and
\endenv in place of \begin{env} and
\end{env}.
B.1.3 Fragile Commands
Fragile commands are not relevant to HEVEA and \protect is
defined as a null command.
B.1.4 Declarations
Scope rules are the same as in LATEX.
B.1.5 Invisible Commands
I am a bit lost here. However spaces in the output should correspond
to users expectations. Note that, to HEVEA being
invisible commands is a static property attached to command name.
B.1.6 The \\ Command
The \\ and \\* commands are the same, they perform a
line break, except inside arrays where they end the current row.
Optional arguments to \\ and \\* are ignored.
B.2 The Structure of the Document
Document structure is a bit simplified with respect to LATEX, since
documents consist of only two parts.
The preamble starts as soon as HEVEA starts to operate and
ends with the \begin{document} construct.
Then, any input occurring before
\end{document} is translated to html.
However, the preamble is processed
and the preamble comprises the content of the files given as command-line
arguments to HEVEA, see section C.1.1.1).
As a consequence, command and environment definitions that
occur before \begin{document} are performed.
and they remain
valid during all the processing.
In particular one can define a header and a footer, by using the
\htmlhead and \htmlfoot commands in the preamble.
Those commands register their argument as the header and the footer of
the final html document. The header appears first while the footer
appears last in (visible) html output.
This is mostly useful when HEVEA output is later cut into pieces by
HACHA, since both header and footer are replicated
at the start and end of any file generated by HACHA.
For instance, to append a copyright notice at the end of all the html
pages, it suffices to invoke the \htmlfoot command as follows
in the document preamble:
\htmlfoot{\copyright to me}
The \htmlhead command cannot be used for changing anything outside of
the html document body, there are specific commands for doing this.
Those command must be used in the document preamble.
One can
change HEVEA default (empty) attribute of
the opening <body ...> tag by redefining
\@bodyargs.
For instance, you get black text on a white background, when the
following declaration occurs before \begin{document}:
Since version 1.08, a recommended alternative is to use style sheets:
\newstyle{body}{color:black; background:white;}
One can also change the default (empty) attribute of the opening
<html ...> tag by redefining
\@htmlargs. For instance you can set the language attribute
of the whole document by issuing the following redefinition in
the document preamble:
\renewcommand{\@htmlargs}{lang=en}
Similarly, some elements can be inserted into the output file
head element by redefining the \@meta command
(Such elements typically are meta, link, etc.).
As such text is pure html, it should be included in a
rawhtml environment. For instance, you can specify
author information as follows:
Note how \@meta is first bound to
\oldmeta before being redefined and how \oldmeta is
invoked in the new definition of \@meta.
Namely, simply overriding the old definition of \@meta would
imply not outputting default meta-information.
The \@charset command holds the value of the (html) document character
set. By default, this value is US-ASCII.
In previous versions of HEVEA, one could change the
value of the document character set by simply redefining
\@charset. Then, it was users responsability to provide a
(LATEX) document in the correspounding encoding.
This is no longer so, and users should not redefine
\@charset directly. Please, see Section 8.6 for details.
B.3 Sentences and Paragraphs
B.3.1 Spacing
Generally speaking, spaces (and single newline characters) in the
source are echoed in the output. Browser then manage with spaces and
line-breaks. Following LATEX behaviour, spaces after commands are
not echoed. Spaces after invisible commands with arguments are not
echoed either.
However this is no longer true in math mode, see
section B.7.7 on spaces in math mode.
B.3.2 Paragraphs
New paragraphs are introduced by one blank line or more.
Paragraphs are not indented. Thus the macros \indent and
\noindent perform no action.
Paragraph are rendered by p elements.
In some occasions, this technique may produce spurious paragraphs
(see 3.1.1).
B.3.3 Footnotes
The commands \footnote,
\footnotetext and \footnotemark (with or without
optional arguments) are supported.
The footnote counter exists and (re)setting it or redefining
\thefootnote should work properly.
When footnotes are issued by a combination of \footnotemark and
\footnotetext, a \footnotemark
command must be issued
first, otherwise some footnotes may get numbered incorrectly or disappear.
Footnotes appear at document end in the article style and
at chapters end in the book style.
See section 7.3.6 for a description of how footnotes are flushed.
B.3.4 Accents and special symbols
Thanks to Unicode character references, HEVEA can virtually output
any symbol.
It may happen that HEVEA does not known about a particular symbol,
that is, most of the time, HEVEA does not known about a particular
command. In that case a warning is issued to draw user attention.
Users can then choose a particular symbol amongst the recognized ones,
or as an explicit Unicode character reference (see
Section 4.2 for an example of this technique).
Commands for making accents used in non-English languages, such as
\', work when applied to accent-less (i.e. ascii)
letters and that the corresponding accented letters exist
in the Unicode character set.
Otherwise, the argument to the command is not modified
and a warning is issued.
For instance, consider the following source code, where, after a
legitimate use of acute accents, one attempt to put an accute accent
over the letter “h”:
``\'Ecole'' works as in \LaTeX, while ``\'h'' does not.
HEVEA output will be “École” works as in LATEX, while “h” does not.
And a warning will be issued.
./tmp.tex:3741: Warning: Application of '\'' on 'h' failed
Observe that using input encodings
is a convenient alternative to accent commands —
see Section B.17.4.
B.4 Sectioning
B.4.1 Sectioning Commands
Sectioning commands from \part down to
\subparagraph are defined in base style files.
They accept an optional argument and have starred versions.
The non-starred sectioning commands from \part down to
\subsubsection show section numbers in sectional unit headings,
provided their level is greater than or equal to the current
value of the secnumdepth counter.
Sectional unit levels and the default value of the secnumdepth counter
are the same as in LATEX.
Furthermore, given a sectional unit secname, the
counter secname exists and the appearance of sectional units
numbers can be changed by redefining \thesecname.
For instance, the following redefinition turn the numbering of
chapters into alphabetic (uppercase) style:
\renewcommand{\thechapter}{\Alph{chapter}}
When jumping to anchors, browsers put the targeted line on top
of display. As a consequence, in the following code:
\section{A section}
\label{section:section}
...
See Section~\ref{section:section}
Clicking on the link produced by
\ref{section:section} will result in not displaying the
targeted section title.
A fix is writing:
\section{\label{section:section}A section}
...
See Section~\ref{section:section}
Starting with version 2.04, HEVEA and HACHA will use the label name
(section:section above) for the table of contents they generate.
For instance, the source code for the next sectioning command just
below is:
\subsection{The \label{appendix}Appendix}
As a consequence, the link to the next section on top
of this page should read as:
That is, HEVEA used the label name given in source as
an anchor.
Notice that this behaviour applies to the \label command
that occurs first in the sectioning command argument.
B.4.2 The Appendix
The \appendix command exists and should work as in LATEX.
B.4.3 Table of Contents
HEVEA now generates a table of contents, using a procedure similar
to the one of LATEX(a .htoc file is involved).
One inserts this table of contents in the main document by issuing
the command \tableofcontents.
Table of contents is controlled by the counter tocdepth.
By default, the table of contents shows sectioning units down to the
subsubsection level in article style and down to the subsection level
in book (or report) style. To include more or less
sectioning units in the
table of contents, one should increase or decrease the tocdepth
counter.
It is important to notice that HEVEA produces such a table of
contents, only when it has total control over cross-references.
More precisely, HEVEA cannot produce the table of contents when it
reads LATEX-produced .aux files.
Instead, it should read its own .haux files.
This will naturally occur if no .aux files are present,
otherwise these .aux files should be deleted, or HEVEA
should be instructed not to read them with the command-line option
-fix
(see Sections B.11.1 and C.1.1.4).
One can also add extra entries in the table of contents by using
the command \addcontentslines, in a way similar
to LATEX homonymous command.
However, hyperlinks need to be introduced explicitly,
as in the following example, where
an anchor is defined in the section title and referred to in the
argument to \addcontentsline:
However, HEVEA has a more sophisticated way of producing
a kind of map w.r.t. the sectioning of the document.
A later run of HACHA on HEVEA output file splits it
in smaller files organized in a tree whose nodes are tables of
links.
By contrast with LATEX, starred sectioning commands generate
entries in these tables of contents.
Table of contents entries hold the optional argument to sectioning
commands or their argument when there is no optional
argument. Section 7 explains how to
control HACHA.
B.5 Classes, Packages and Page Styles
B.5.1 Document Class
Both LATEX 2є \documentclass and old LATEX
\documentstyle are accepted.
Their argument style is interpreted by attempting to load a
style.hva file.
Presently, only the style files article.hva, seminar.hva,
book.hva and report.hva exist, the latter two
being equivalent.
If one of the recognized styles has already been loaded at the time when
\documentclass or
\documentstyle is executed, then no attempt to load a style
file is made. This allows to override the document style file by
giving one of the four recognized style files of HEVEA as a command
line argument (see 2.2).
Conversely, if HEVEA attempt to load style.hva
fails, then a fatal error is flagged, since it can be sure
that the document cannot be processed.
B.5.2 Packages and Page Styles
HEVEA reacts to
\usepackage[options]{pkg} in
the following way:
The whole
\usepackage command with its arguments gets echoed to the
image file (see 6).
HEVEA attempt to load file pkg.hva,
(see section C.1.1.1 on where HEVEA searches for files).
Note that HEVEA will not fail if it cannot load
pkg.hva and that no warning is issued in that case.
The HEVEA distribution contains implementations of some packages,
such as verbatim, colors, graphics, etc.
In some situations it may not hurt at all if HEVEA does not
implement a package, for instance HEVEA does not provide an
implementation for the fullpage package.
Users needing an implementation of a package that is widely used and
available are encouraged to contact the
author.
Experienced users may find it fun to attempt to write package
implementations by themselves.
B.5.3 The Title Page and Abstract
All title related commands exist, with the following peculiarities:
The argument to the \title command appears
in the html document header. As a consequence, titles should
remain simple. Normal design (as regards HEVEA) is for
\title to occur in the document preamble, so that the title
is known at the time when the document header is emitted (while
processing \begin{document}). However, there are two subtleties.
If no \title
command occurs in document preamble and that one \title
command appears in the document, then the title is saved into the
.haux file for a next run of HEVEA to put it in the
html document header.
If \title commands are present both in preamble and after
\begin{document}, then the former takes precedence.
When not present the date is left empty. The
\today command generates will work properly
only if hevea is invoked with the -exec xxdate.exe
option. Otherwise \today generates nothing and a warning is
issued.
The abstract environment is present is all base styles,
including the book style.
The titlepage environment does nothing.
B.6 Displayed Paragraphs
Displayed-paragraph environments translate to block-level
elements.
In addition to the environments described in this section,
HEVEA implements the center, flushleft and
flushright environments.
HEVEA also implements the corespondant TEX style declaration
\centering\raggedright and \raggedleft,
but these declarations may not work as expected, when they do not
appear directly inside a displayed-paragraph environment or inside an array
element.
B.6.1 Quotation and Verse
The quote and quotation environments are the same thing: they
translate to BLOCKQUOTE elements.
The verse environment is not supported.
B.6.2 List-Making environments
The itemize, enumerate and description
environments translate to the ul, ol, and
DL elements and this is the whole story.
As a consequence, no control is allowed on the appearances of these
environments. More precisely optional arguments to \item do not
function properly inside itemize and enumerate. Moreover, item
labels inside itemize or numbering style inside enumerate
are browser dependent.
However, customized lists can be produced by using the
the list environment (see next section).
B.6.3 The list and trivlist
environments
The list environment translates to the
DL element.
Arguments to \begin{list} are handled as follows:
\begin{list}{default_label}{decls}
The first argument default_label is the label generated by an
\item command with no argument.
The second argument, decls is a sequence of declarations.
In practice, the following declarations are relevant:
\usecounter{counter}
The counter counter is incremented by \refstepcounter
by every \item command with no argument, before it does
anything else.
\renewcommand{\makelabel}[1]{…}
The command \item executes
\makelabel{label}, where label is the item
label, to print its label.
Thus, users can change label formatting by redefining
\makelabel.
The default definition of \makelabel simply echoes label.
As an example, a list with an user-defined counter can be defined as
follows:
The trivlist environment is also supported. It is equivalent to
the description environment.
B.6.4 Verbatim
The verbatim and verbatim* environments translate to
the PRE element.
Inside verbatim*, spaces are replaced by underscores (“_”).
Similarly, \verb and \verb*
translate to the CODE text element.
The alltt environment is supported.
B.7 Mathematical Formulae
B.7.1 Math Mode Environment
The three ways to use math mode ($…$,
\(…\) and
\begin{math}…\end{math}) are supported.
The three ways to use display math mode ($$…$$,
\[…\] and
\begin{displaymath}… \end{displaymath}) are also
supported.
Furthermore, \ensuremath behaves as expected.
The equation, eqnarray, eqnarray* environments
are supported.
Equation labelling and numbering is performed in the first two
environments, using the equation counter.
Additionally, numbering can be suppressed in one row of an
eqnarray, using the \nonumber command.
Math mode is not as powerful in HEVEA as in LATEX. The
limitations of math mode can often be surpassed by using math display
mode. As a matter of fact, math mode is for in-text formulas. From
the html point of view, this means that math mode does not close
the current flow of text and that formulas in math mode must be
rendered using text-level elements only. By contrast, displayed
formulas can be rendered using block-level elements. This means that
HEVEA have much more possibilities in display context than inside
normal flow of text. In particular, stacking text elements one above
the over is possible only in display context.
For instance compare how HEVEA renders
$\frac{1}{\sum_{i=1}^{\infty} i$
as: 1/∑i=1∞i, and
$$\frac{1}{\sum_{i=1}^{\infty} i$$ as:
1
∞
∑
i=1
i
B.7.2 Common Structures
HEVEA admits, subscript (_), superscripts (^) and
fractions (\frac{numer}{denom}).
The best effect is obtained in display mode, where html
table element is extensively used.
By contrast, when not in display mode, HEVEA uses only
SUB and SUP text-level elements to render superscrits
and subscript, and the result may not be very satisfying.
However,
simple subscripts and superscripts, such as x_i or x^2,
are always rendered using the SUB
and SUP text-level elements and their appearance should be correct
even in in-text formulas.
When occurring outside math mode, characters _ and ^ act as
ordinary characters and get echoed to the output. However, a warning
is issued.
An attempt is made to render all ellipsis constructs (\ldots,
\cdots, \vdots and \ddots). The effect may be
strange for the latter two.
B.7.3 Square Root
The nth root command \sqrt is supported only for n=3,4, thanks to the existence of Unicode characters for the same. For the others, we shift to fractional exponents, in which case, the \sqrt command is
defined as follows:
\newcommand{\sqrt}[3][2]{\left(#2\right)^{1/#1}}
Then, the source
fragment: $$\sqrt[5]{\frac{1}{n!}} + \sqrt[3]{\pi} + \sqrt{\pi}$$ gets rendered
as follows:
⎛
⎜
⎜
⎝
1
n!
⎞
⎟
⎟
⎠
1
5
+
∛
π
+
√
π
B.7.4 Unicode and mathematical symbols
The support for unicode symbols offered by modern browsers allows to
translate almost all math symbols correctly.
Log-like functions and variable sized-symbols are recognized and their
subscripts and superscripts are put where they should in display mode.
Subscript and superscript placement can be changed using the
\limits and \nolimits commands.
Big delimiters are also handled.
B.7.5 Putting one thing above/below/inside
The commands \stackrel, \underline and \overline
are recognized.
They produce sensible output in display mode.
In text mode, these macros call the \textstackrel,
\textunderline and \textoverline macros.
These macros perform the following default actions
\textstackrel
Performs ordinary superscripting.
\textunderline
Underlines its argument, using the
U text-level element.
\textoverline
Overlines using style-sheets (used <SPAN> with a top border).
The command \boxed works well both in display and normal math mode. Input of the form \boxed{\frac{\pi}{2}} produces π/2 in normal math, and
π
2
in display-math mode. The commands \bigl,\bigr etc. are also rendered well. Some examples can be found here.
B.7.6 Math accents
Math accents that have coresponding text accents
(\hat, \tilde, etc.) are
handled by default. They in fact act as the
corresponding text-mode accents (Section B.3.4).
As a consequence, they work properly only on ascii letters.
This may be quite cumbersome, but at least some warnings draw user’s
attention on the problem.
If accents are critical to your document and that HEVEA issues
a lot of warnings, a solution is to redefine the math accent command.
A suggested replacement is using limit superscripts.
That way accents are positioned above symbols in display mode and
after symbols in text mode.
Whereas, with the default of \hat being \^,
you get “µ = δ”, with the following warnings:
./tmp.tex:4652: Warning: Application of '\^' on '\mu' failed
./tmp.tex:4652: Warning: Application of '\^' on '\delta' failed
The \vec
command is rendered differently in display and non-display mode. In
display mode, the arrow appears in normal position, while in
non-display the arrow appears as an ordinary superscript.
\vec{u} in text mode: u→,
\vec{u} in display mode:
→
u
Most “extensible accents” (\widetilde, \widehat, etc.)
are not even defined.
There are a few exceptions: line “accents”:
abc
\underline
abc
\overline
Brace “accents”:
1 × 2 × ⋯ × n
◥
▼
◤
\underbrace
◢
▲
◣
1 × 2 × ⋯ × n
\overbrace
And arrow “accents”:
◂
1 × 2 × ⋯ × n
\overleftarrow
▸
1 × 2 × ⋯ × n
\overrightarrow
B.7.7 Spacing
By contrast with LATEX, space in the input matters in math mode.
One or more spaces are translated to one space.
Furthermore,
spaces after commands (such as \alpha) are echoed
except for invisible commands (such as \tt).
This allows users to control space in their formulas, output being
near to what can be expected.
Explicit spacing commands (\,, \!, \: and
\;) are recognized, the first two commands do nothing, while
the others two output one space.
B.7.8 Changing Style
Letters are italicized inside math mode and this cannot be
changed. The appearance of
other symbols can be changed using
LATEX 2є style changing commands (\mathbf, etc.).
The commands \boldmath and \unboldmath are not
recognized. Whether symbols belonging to the symbol font are affected
by style changes or not is browser dependent.
The \cal declaration and the \mathcal command (that
yield calligraphic letters in LATEX) exist. They yield red letters by
default.
Observe that this does not corresponds directly to how LATEX manage style
in math mode and that, in fact, style cannot really change in math mode.
Math style changing declarations \displaystyle and
\textstyle do nothing when HEVEA is already in the requested
mode,
otherwise they issue a warning.
This is so because HEVEA implements displayed maths as tables,
which require to be both opened and closed and introduce line breaks
in the output.
As a consequence, warnings on \displaystyle are to be taken seriously.
The commands \scriptstyle and \scriptscriptstyle
perform type size changes.
B.8 Definitions, Numbering
B.8.1 Defining Commands
HEVEA understands command definitions given in LATEX style. Such
definitions are made using
\newcommand, \renewcommand and \providecommand.
These three constructs accept the same arguments and have the same
meaning as in LATEX, in particular it is possible to define an user
command with one optional argument.
However, HEVEA is more tolerant: if command
name already exists, then a subsequent \newcommand{name}…is ignored. If macro name does not exists, then
\renewcommand{name}…performs a definition of name. In both cases, LATEX would crash, HEVEA just issues
warnings.
The behaviour of \newcommand allows to shadow document
definition, provided the new definitions are processed before the
document definitions.
This is easily done by grouping the shadowing definition in a
specific style file given as an argument to HEVEA (see section 5.1).
Conversely, changes of base macros (i.e. the ones that HEVEA
defines before loading any user-specified file) must be performed
using \renewcommand.
Scoping rules apply to macros, as they do in LATEX.
Environments and groups define a scope and command definition
are local to the scope they occur.
It is worth noticing that HEVEA also partly implements TEX definitions
(using \def) and bindings (using \let), see
section B.16.1 for details.
B.8.2 Defining Environments
HEVEA accepts environment definitions and redefinitions
by \newenvironment and \renewenvironment.
The support is complete and should conform
to [LATEX, Sections C.8.2].
Environments define a scope both for commands and environment
definitions.
B.8.3 Theorem-like Environments
New theorem-like environments can also be introduced and redefined,
using \newtheorem and \renewtheorem.
Note that, by contrast with plain environments definitions,
theorem-like environment definitions are global definitions.
B.8.4 Numbering
LATEX counters are (fully ?) supported.
In particular, defining a counter cmd with
\newcounter{cmd} creates a macro
\thecmd that outputs the counter value.
Then the \thecmd command can be redefined.
For instance, section numbering can be turned into alphabetic style by:
\renewcommand{\thesection}{\alph{section}}
Note that TEX style for counters is not supported at all and that using
this style will clobber the output. However, HEVEA implements
the calc package that makes using TEX style for counters
useless in most situations (see section B.17.3).
B.8.5 The ifthen Package
The ifthen package is partially supported.
The one unsupported construct is the
\lengthtest test expression, which is
undefined.
As a consequence, HEVEA accepts the following example from the
LATEX manual:
Additionally, a few boolean registers are defined by HEVEA.
Some of them are of interest to users.
hevea
Initial value is true.
The hevea.sty style file also defines this register with
initial value false.
mmode
This register value reflects HEVEA operating
mode, it is true in math-mode and false otherwise.
display
This register value reflects HEVEA operating
mode, it is true in display-mode and false otherwise.
footer
Initial value is true.
When set false, HEVEA does not insert its footer “This
document has been translated by HEVEA”.
Finally, note that HEVEA also recognised à la TEX conditional
macros (see section B.16.1.4). Such macros are fully compatible
with the boolean registers of the ifthen package, as it is
the case in LATEX.
B.9 Figures and Other Floating Bodies
Figures and tables are put where they appear in source, regardless of
their placement arguments.
They are outputted inside a BLOCKQUOTE element and they are
separated from enclosing text by two
horizontal rules.
Captions and cross referencing are handled.
However captions are not moved at end of figures: instead, they appear
where the \caption commands occur in source code.
The \suppressfloats command does nothing and the
figure related counters (such as topnumber) exist but are useless.
Marginal notes go in the right margin by default.
To get marginal notes in the left margin, use
\reversemaginpar.
Marginal notes are handled in an HEVEA specific way.
By default, all notes go in the right margin.
Issuing \reversemarginpar causes the notes to go in the left
margin. Unsurprisingly, issuing \normalmarginpar reverts to
default behaviour.
The \marginpar command has an optional argument.
\marginpar[left_text]{right_text}
If optional argument left_text is present and that notes
go in the left margin, then left_text is the text of the
note. Otherwise, right_text is the text of the note.
As a conclusion, marginal notes in HEVEA always go to a fixed side
of the page, which side being controlled by the commands
\normalmarginpar (right side) and \reversemarginpar
(left side). This departs form LATEX that selects a default side
depending on the parity of the page counter.
Marginal notes are styled by the means of two environment style
classes (see Section 9.3) :
marginpar and marginparside.
The latter marginparside takes care of margins and placement as
a float, its value is marginparright for notes in the right
margin and marginparleft for notes in the left margin.
Users are not expected to alter those.
The marginpar environment style class governs the general
aspect of all marginal notes.
Users can control the aspect of all marginal notes by defining a new
style class and assigning the marginpar environment style
class.
For instance, to get all marginal notes in red font,
and taking 10% of the page width (in place of the default
20%),
one can issue the following commands in the document preamble.
Limited support is offered.
The tabbing environment translate to a flexible tabular-like
environment.
Inside this environment, the command \kill ends a row, while
commands
\= and \> start a new column.
All other tabbing commands do not even exist.
B.10.2 The array and tabular
environments
These environments are supported, using html
table element, rendering is satisfactory in most (not too
complicated) cases.
By contrast with LATEX,
some of the array items always are typeset in display mode.
Whether an array item is typeset in display mode or not depends upon
its column specification,
the l, c and r specifications open display mode
while the remaining p and @ do not.
The l, c,r and @ specifications
disable word wrap, while the p specification enables it.
Entries in a column whose specification is l (resp. c or
r) get left-aligned (resp. centered or right-aligned)
in the horizontal direction.
They will get top-aligned in the vertical direction if there are
other column specifications in the
same array that specify vertical alignment constraints
(such as p{wd}, see below).
Otherwise, vertical alignment is unspecified.
Entries in a column whose specification is p{wd}
get left-aligned in the horizontal direction and
top-aligned in the vertical direction
and a paragraph break reduces to one line break inside them.
This is the only occasion where
HEVEA makes a distinction between LR-mode and paragraph mode.
Also observe that the length argument wd to the p
specification is ignored.
Some LATEX array features are not supported at all:
Optional arguments to \begin{array} and
\begin{tabular} are ignored.
The command \vline does not exists.
Some others are partly rendered:
Spacing between columns is different.
@ formatting specifications in \multicolumn
argument are ignored.
If a | appears somewhere in the column formatting
specification, then the array is shown with borders.
The command \hline does nothing if the array has borders
(see above). Otherwise, an horizontal rule is outputted.
The command \cline ignores its argument and is equivalent
to \hline.
Similarly the command
\extracolsep issues a warning and ignores its argument.
Additionally, the tabular* environment is
recognised and gets rendered as an html table with an advisory
width attribute.
By default, HEVEA implements the array package
(see [LATEX-bis, Section 5.3] and section B.17.2 in this
document), which significantly extends the
array and tabular environments.
B.11 Moving Information Around
B.11.1 Files
In some situations,
HEVEA uses some of the ancillary files generated by LATEX.
More precisely, while processing file doc.tex,
the following files may be read:
.aux
The file doc.aux contains
cross-referencing information, such as figure or section numbers.
If this file is present, HEVEA reads it and put such numbers (or
labels) inside
the links generated by the \ref command. If the .aux
file is not present, or if the hevea command is given the
-fix option, HEVEA will instead use .haux
files.
.haux
Such files are HEVEA equivalents of
.aux files. Indeed, they are .aux files tailored to
HEVEA needs.
Two runs of HEVEA might be needed to get cross references right.
.htoc
This file contains a formatted table of
contents. It is produced while reading the .haux file.
As consequence a table of contents is available only when the
.haux file is read.
.hbbl
The doc.hbbl file
is generated by bibhva from doc.haux.
When present, it is read by the \bibliography command.
.bbl
The doc.bbl file is
generated by BibTEX from doc.aux.
When present, and if no doc.hbbl exists,
doc.bbl is read by the \bibliography command.
.hidx and .hind
HEVEA computes its own indexes, using .hidx files for
storing index references and, using .hind files
for storing formatted indexes.
Index formatting significantly departs from the one of LATEX.
Again, several runs of HEVEA might be needed to get indexes right.
HEVEA does not fail when it cannot find an auxiliary file.
When another run of HEVEA is needed, a warning is issued,
and it is user’s responsibility to rerun HEVEA.
However, the convenient -fix command-line option instructs
HEVEA to rerun itself, until it believes it has reached stable state.
B.11.2 Cross-References
The LATEX commands \label and \ref are changed by HEVEA
into html anchors and local links, using the “a” element.
Additionally, numerical references to sectional units, figures,
tables, etc. are shown, as they would appear in the .dvi file.
Numerical references to pages (such as generated by \pageref)
are not shown; only an link is generated.
The anchor used is the label argument to
\label{label}.
More precisely, \label{label} translates to
<a id="label"></a>;
while \ref{label}
translates to <a name="#label">nnn</a>,
where nnn is the appropriate numerical reference to a section.
As a consequence spaces are better avoided in label.
Starting with HEVEA version 2.04,
the html anchors used by \label and \ref cannot
differ from the arguments to these commands anymore.
Moreover,
when \label{label} occurs
inside the argument of a sectioning command (i.e. in section title,
as recommended by section B.4.1),
then HEVEA and HACHA will use label
as the “id” attribute of the corresponding section.
For instance, the LATEX source of this very section is:
Notice that no <a id="cross-reference"></a> appears above.
Instead id="cross-reference" appears
in the enclosing h3 header element.
While processing a document doc.tex,
cross-referencing information can be computed in two different, mutually
exclusive, ways, depending
on whether LATEX has been previously run or not:
If there exists a file
doc.aux and that hevea has not been
given the command-line option -fix,
then cross-referencing information is extracted
from that file. Of course, the doc.aux file
has to be up-to-date, that is,
it should be generated by running LATEX as many times as necessary.
(For HEVEA needs, one run is probably sufficient).
If no doc.aux file exists or if hevea
has been given the -fix command-line option, then HEVEA
expect to find cross-referencing information in the file
doc.haux.
The second option is recommended.
When using its own doc.haux file,
HEVEA will output a
new doc.haux file at the end of its processing.
This new doc.haux file contains actualised
cross referencing information.
Hence, in that case, HEVEA may need to run twice to get
cross-references right.
Note that, just like LATEX,
HEVEA issues a warning then the cross-referencing information it
generates differs from what it has read at start-up, and that it does
not fail if doc.haux does not exist.
Observe that if a non-correct doc.aux file is
present, then cross-references will apparently be wrong. However the
links are correct.
B.11.3 Bibliography and Citations
The \cite macro is supported. Its optional argument is
correctly handled. Citation labels are extracted from the
.aux file if present, from the .haux file otherwise.
Note that these labels are put there by LATEX in the first case,
and by HEVEA in the second case, when they process the
\bibitem command.
Using BibTEX
All BibTEX related commands exist and echo the appropriate
information into the .haux file.
In particular, the \bibliography command exists and attempts to load the
formatted bibliography, i.e. to load the .hbbl file.
The .hbbl file is produced from the .haux file by
the companion program bibhva (see C.1.4).
To include the bibliographic references extracted from .bib
databases, it should normally suffice to do:
# hevea doc.tex
# bibhva doc
# hevea doc.tex
In case no .hbbl file exists,
the \bibliography command attempts to load
the .bbl file normally used while combining LATEX and
BibTEX. Thus, another way to extract bibliographic references from
.bib databases is:
# latex doc.tex
# bibtex doc
# hevea doc.tex
In case both files exist,
notice that loading the .hbbl file has priority over
loading the .bbl file.
B.11.4 Splitting the Input
The \input and \include commands exist and they perform
exactly the same operation of searching (and then processing) a file,
whose name is given as an argument.
See section C.1.1.1 on how HEVEA searches files.
However, in the case of the \include command, the file is
searched only when previously given as an argument to
the \includeonly command.
Note the following features:
TEX syntax for \input is not supported. That is,
one should write \input{filename}.
If filename is excluded with the -e command-line
option (see section C.1.1.4),
then HEVEA does not attempt to load filename.
Instead, it
echoes \input{filename} and
\include{filename} commands into the
image file. This sounds complicated, but this is what you want!
HEVEA does not fail when it cannot find
a file, it just issues a warning.
The \listfiles command is a null command.
B.11.5 Index and Glossary
Glossaries are not handled (who uses them ?).
While processing a document doc.tex, index
entries go into the file doc.hidx, while
the formatted index gets written into the file
doc.hind.
As with LATEX, two runs of HEVEA are normally needed to format
the index.
However, if all index producing commands (normally \index)
occur before the index formatting command (normally
\printindex), then only one run is needed.
As in LATEX, index processing is not enabled by default and
some package has to be loaded explicitly in the
document preamble.
To that aim, HEVEA provides the standard package makeidx,
and two extended packages that allow the production of several indexes
(see section B.17.7).
Formatting of indexes in HEVEA departs from LATEX behaviour.
More precisely the theindex environment does not exist.
Instead, indexes are formatted using special
indexenv environments.
Those details do not normally concern users.
However, the
number of columns in the presentation of the index can be controlled
by setting the value of the indexcols counter (default value
is two).
B.11.6 Terminal Input and Output
The \typeout command echos its argument on the
terminal, macro parameter #i are replaced by their values.
The \typein command is not supported.
B.12 Line and Page Breaking
B.12.1 Line Breaking
The advisory line breaking command \linebreak
will produce a line break if it has no argument or if its optional
argument is 4.
The \nolinebreak command is a null command.
The \\ and \\* commands output a <BR> tag,
except inside arrays where the close the current row.
Their optional argument is ignored.
The \newline command outputs a <BR> tag.
All other line breaking commands, declarations or environments are
silently ignored.
B.12.2 Page Breaking
They are no pages in the physical sense in html. Thus, all these
commands are ignored.
B.13 Lengths, Spaces and Boxes
B.13.1 Length
All length commands are ignored, things go smoothly when LATEX syntax is
used (using the \newlength, \setlength, etc. commands,
which are null macros).
Of course, if lengths are really important to the document, rendering
will be poor.
Note that TEX length syntax is not at all recognised. As a
consequence, writing things like \textwidth=10cm will clobber
the output.
Users can correct such misbehaviour by adopting LATEX syntax, here
they should write
\setlength{\textwidth}{10cm}.
B.13.2 Space
The \hspace, \vspace and \addvspace spacing
commands and their starred versions recognise positive explicit length
arguments. Such arguments get converted to a number of non-breaking
spaces or line breaks.
Basically, the value of 1em or 1ex is one space or one
line-break. For other length units, a simple conversion based upon a
10pt font is used.
HEVEA cannot interpret more complicated length arguments
or perform negative spacing.
In these situations, a warning is issued and no output is done.
Spacing commands without arguments are recognised.
The \enspace, \quad and \qquad commands output
one, two and four non-breaking spaces, while the \smallskip,
\medskip and \bigskip output one, one, and two line
breaks.
Stretchable lengths do not exist, thus the \hfill and
\vfill macros are undefined.
B.13.3 Boxes
Box contents is typeset in text mode (i.e. non-math and non-display
mode).
Both LATEX boxing commands \mbox and \makebox
commands exist.
However \makebox generates a specific warning, since HEVEA
ignore the length and positioning instructions given as optional
argument.
Similarly, the boxing with frame \fbox and \framebox
commands are recognised and
\framebox issues a warning.
When in display mode, \fbox frames its argument by
enclosing it in a
table with borders. Otherwise, \fbox calls the \textfbox
command, which issues a warning and typesets its argument
inside a \mbox (and thus no frame is drawn).
Users can alter the behaviour of \fbox in non-display mode by
redefining \textfbox.
Boxes can be saved for latter usage by storing them in bins.
New bins are defined by \newsavebox{cmd}.
Then some text can be saved into cmd by
\sbox{cmd}{text} or
\begin{lrbox}{cmd}text\end{lrbox}.
The text is translated to html, as if it was inside a \mbox
and the resulting output is stored.
It is retrieved (and outputted) by the command
\usebox{cmd}.
The \savebox command reduces to \sbox, ignoring its
optional arguments.
The \rule commands translate to a html horizontal rule
(<HR>) regardless of its arguments.
All other box-related commands do not exist.
B.14 Pictures and Colours
B.14.1 The picture environment and the graphics
Package
It is possible to have pictures and graphics processed by
imagen (see section 6.1).
In the case of the picture environment
it remains users responsibility to explicitly choose
source chunks that will get rendered as images.
In the case of the commands from the graphics package,
this choice is made by HEVEA.
Users should enclose all picture elements in a toimage
environment (or inside %BEGIN IMAGE… %END IMAGE comments) and insert an \imageflush command, where they want
the image to appear in html output:
This will result in normal processing by LATEX and image inclusion
by HEVEA:
All commands from the graphics package are implemented using the
automatic image inclusion feature.
More precisely, the outermost invocations of
the \includegraphics, \scalebox,
etc. commands are sent to the image image file and there will
be one image per outermost invocation of these commands.
For instance, consider a document doc.tex that
loads the graphics package and that includes some (scaled)
images by:
yields html that basically consists in three image links,
the images being generated by imagen.
Since the advent of pdflatex,
using \includegraphics to insert bitmap images
(e.g..gif or .jpg)
became frequent.
In that case, users are advised not to use HEVEA default
implementation of the graphics package.
Instead, they may use a simple variation of
the technique described in Section 8.2.
B.14.2 The color Package
HEVEA partly implements the color package.
Implemented commands are \definecolor, \color,
\colorbox,
\textcolor, \colorbox and \fcolorbox.
Other commands do not exist.
At startup,
colours black, white,
red, green, blue,
cyan, yellow and magenta are
pre-defined.
Colours are defined by
\definecolor{name}{model}{spec},
where name is the color name, model is the color
model used, and spec is the color specification according to
the given model.
Defined colours are used by the declaration
\color{name} and by the command
\textcolor{name}{text}, which
change text color.
Please note that, the \color declaration
accepts color specifications directly
when invoked as
\color[model]{spec}.
The \textcolor command has a similar feature.
As regards color models, HEVEA implements the rgb,
cmyk, hsv and hls color models.
In those models, color specifications are floating point numbers less
than one.
For instance, here is the definition for the red color:
\definecolor{red}{rgb}{1, 0, 0}
The named color model is also supported, in this model color
specification are just names…
Named colours are the ones of dvips.
Colours should be used carefully. Too many colours
hinders clarity and some of the colours may not be readable on the
document background color.
B.14.2.1 The bgcolor environment
With respect to the LATEX color package, HEVEA features
an additional
bgcolor environment, for changing the background color of some
subparts of the document.
The bgcolor environment is a displayed environment and it
normally starts a new line.
Simple usage is \begin{bgcolor}{color}…
\end{bgcolor}, where
color is a color defined with \definecolor.
Hence the following source yield a paragraph with a red background:
\begin{bgcolor}{red}
\color{yellow}Yellow letters on a red backgroud
\end{bgcolor}
Yellow letters on a red background
The bgcolor environment is implemented by one-cell
table element, it takes an
optional argument that is used as an attribute for the inner td
element (default value is style="padding:1em").
Advanced users may change the default, for instance as:
\begin{bgcolor}[style="padding:0"]{yellow}
\color{red}Red letters on a yellow backgroud
\end{bgcolor}
The resulting output will be red letters
on a yellow background and no padding:
Red letters on a yellow background, no padding
B.14.2.2 From High-Level Colours to Low-Level Colours
High-level colours are color names
defined with \definecolor.
Low-level colours are html-style colours.
That is, they are either one of the sixteen conventional colours black,
silver etc., or a RGB hexadecimal color specification of the form
"#XXXXXX".
One changes the high-level high-color into a low-level color by
\@getcolor{high-color}.
Low-level colours are appropriate inside html attributes and as
arguments to the \@fontcolor internal macro.
An example of \@getcolor usage can be found at the end of
section 8.5.
There is also \@getstylecolor command that acts
like\@getcolor, except that it does not output the double
quotes around RGB hexadecimal color specifications.
Such low-level colours are appropriate for style definitions in
cascading style sheets [CSS-2]. See
Section 9.3 for an example.
B.15 Font Selection
B.15.1 Changing the Type Style
All LATEX 2є declarations and environments for changing type style
are recognised. Aspect is rather like LATEX 2є output, but there is
no guarantee.
As html does not provide the same variety of type styles as
LATEX does.
However css provide a wide variety of font properties.
HEVEA uses generic properties, proper rendering will then depend
upon user agent.
For instance, it belongs to the user agent
to make a difference between
italics (rendered by the font style “italic”)
and slanted (rendered by the font style “oblique”).
Here is how HEVEA implements text-style declarations by default:
\itshape
font-style:italic
\slshape
font-style:oblique
\scshape
font-variant:small-caps
\upshape
no style
\ttfamily
font-family:monospace
\sffamily
font-family:sans-serif
\rmfamily
no style
\bfseries
font-weight:bold
\mdseries
no style
Text-style commands also exists, they are defined as
\mbox{\decl…}. For instance,
\texttt is defined as a command with one argument whose body is
\mbox{\ttfamily#1}.
Finally, the \emph command for emphasised text also exists,
it yields text-level em elements.
As in LATEX, type styles consists in three components:
shape, series and family.
HEVEA implements the three components by making one declaration to
cancel the effect of other declarations of the same kind.
For instance consider the following source, that exhibits shape changes:
Then, in the rendering below, “small caps shape” appears in small caps shape
only and not in italics:
italic shape slanted shape
small caps shape upright shape
Old style declarations are also recognised, they translate to
text-level elements. However, no elements are cancelled when using
old style declaration. Thus, the source
“{\sl\sc slanted and small caps}” yields “slanted”
small caps: “slanted and small caps”.
Users need probably not worry about this. However this has an
important practical consequence: to change the default rendering of
type styles, one should redefine old style declaration in order to
benefit from the cancellation mechanism. See
section 10.2 for a more thorough description.
B.15.2 Changing the Type Size
All declarations, from \tiny to \Huge are recognised.
Output is not satisfactory inside headers elements
generated by sectioning commands.
B.15.3 Special Symbols
The \symbol{num} outputs character number num
(decimal) from the Unicode character set.
This departs from LATEX, which output symbol number num in
the current font.
B.16 Extra Features
This section describes HEVEA functionalities that extends on plain LATEX,
as defined in [LATEX].
Most of the features described here are performed by default.
B.16.1 TEX macros
Normally, HEVEA does not recognise constructs that are specific to
TEX.
However, some of the internal commands of HEVEA are homonymous to
TEX macros, in order to enhance compatibility.
Note that full compatibility with TEX is not guaranteed.
B.16.1.1 À la TEX macros definitions
The \def construct for defining commands is supported.
It is important to
notice that HEVEA semantics for \def
follows TEX semantics.
That is, defining a command that already
exists with \def succeeds.
Delimiting characters in command definition are somehow supported.
Consider the following example from the TEX Book:
Please note that delimiting characters are supported as far as I
could, problems are likely with delimiting characters which include
spaces or command names, in particular the command name \{.
One can include \{ in a command argument by using the grouping
characters {… }:
\def\frenchquote(#1){\guillemotleft~\emph{#1}~\guillemotright{} (in French)}
he said \frenchquote(Alors cette accolade ouvrante {``\{''}~?).
Yields:
he said « Alors cette accolade ouvrante “{” ? » (in French).
Another issue regards comments: “%” in arguments may give undefined
behaviours, while comments are better avoided while defining
macros. As an example, the following code will not
be handled properly
by HEVEA:
\def\x%
#1{y}
Such TEX source should be rewritten as \def\x#1{y}.
Another source of incompatibility with TEX is that substitution of
macros parameters is not performed at the same moment by HEVEA and
TEX.
However, things should go smoothly at the first level of macro
expansion, that is when the delimiters
appear in source code at the same level as the macro that is to
parse them.
For instance, the following source will give different results in
LATEX and in HEVEA:
LATEX output is “coucou”A, while HEVEA output is “coucouA”.
Here is HEVEA output:
“coucouA”
Please note that in most situations this discrepancy will make
HEVEA crash.
B.16.1.2 The \let construct
HEVEA also processes a
limited version of \let:
\letmacro-name1 = macro-name2
The effect is to bind macro-name1 to whatever macro-name2
is bound to at the time \let is processed. This construct may
prove very useful in situations where
one wishes to slightly modify basic commands.
See sections 10.3 and B.2 for examples of using
\let in such a situation.
B.16.1.3 The \global construct
It is possible to escape scope and to make global definitions
and bindings by using the TEX construct \global.
The \global construct is significant before
\def and \let constructs.
Also note that \gdef is equivalent to \global\def.
B.16.1.4 TEX Conditional Macros
The \newif\ifname, where name is made of letters
only, creates three macros:
\ifname, \nametrue and
\namefalse.
The latter two set the name condition to true and
false, respectively.
The \ifname command tests the condition name:
\ifname
text1 \else text2 \fi
Text text1 is processed when name is
true, otherwise text2 is processed.
If text2 is empty, then the \else keyword can be
omitted.
Note that HEVEA also implements LATEX ifthen package
and that TEX simple conditional macros are fully compatible with
LATEX boolean registers. More precisely,
we have the following correspondences:
TEX
LATEX
\newif\ifname
\newboolean{name}
\nametrue
\setboolean{name}{true}
\namefalse
\setboolean{name}{false}
\ifname text1\elsetext2\fi
\ifthenelse{\boolean{name}}{text1}{text2}
B.16.1.5 Other TEX Macros
HEVEA implements the macros \unskip and \endinput.
It also supports the \csname… \endcsname
construct.
If one strictly follows the LATEX manual, only commands with no
arguments can be defined inside other commands.
Parameters (i.e.#n) occurring inside command bodies
refer to the outer definition, even when they appear in nested
command definitions.
That is, the following source:
Nevertheless, nested commands with arguments are allowed.
Standard parameters #n still refer to the outer
definition, while nested parameters ##n refer to the
inner definition.
That is, the source:
Date and time support is not enabled by default, for portability and
simplicity reasons.
However, HEVEA source distribution includes a simple (sh)
shell script
xxdate.exe that activates date and time support.
The hevea command, should be invoked as:
# hevea -exec xxdate.exe ...
This will execute the script xxdate.exe, whose output is then
read by HEVEA.
As a consequence, standard LATEX counters year,
month, day and
time are defined and
LATEX command \today works properly.
Additionally the following counters and commands are defined:
Output of the date Unix
command, (e.g. Sun Mar 8 16:43:49 CET 2015)
Note that I chose to add an extra option (and not an extra
\@exec primitive) for security reasons. You certainly do
not want to enable HEVEA to execute silently an arbitrary program
without being conscious of that fact.
Moreover, the hevea program does not execute
xxdate.exe by default since it is difficult to write such
a script in a portable manner.
Windows users should enjoy the same features with the version of
xxdate.exe included in the Win32 distribution.
B.16.4 Fancy sectioning commands
Loading the fancysection.hva file will radically change the
style of sectional units headers: they appear over a green
background, the background color saturation decreases as the sectioning
commands themselves do (this is the style of this manual).
Additionally, the document background color is white.
Note : Fancy section has been re-implemented using style-sheets. While it respects the old behaviour, users are encouraged to try out style-sheets for more flexibility. See Section 9 for details.
The fancysection.hva file is intended to be loaded after
the document base style.
Hence the easiest way to load the fancysection.hva file
is by issuing \usepackage{fancysection} in the document preamble.
To allow processing by LATEX, one may for instance create
an empty fancysection.sty file.
As an alternative, to use fancy section style in
doc.tex whose base style is article
you should issue the command:
# hevea article.hva fancysection.hva doc.tex
You can also make a doc.hva file that contains the two lines:
\input{article.hva}
\input{fancysection.hva}
And then launch hevea as:
# hevea doc.hva doc.tex
Sectioning command background colours can be changed by
redefining the corresponding colours (part, chapter,
section,…).
For instance, you get various mixes of red and orange by:
will yield sectional headers on a red-orange background.
HEVEA distribution features another style for fancy sectioning commands:
the undersection package provides underlined sectional headers.
B.16.5 Targeting Windows
At the time of this release, Windows support for symbols
through Unicode is not as complete as the one of Linux, which I am
using for testing HEVEA.
One of the most salient shortcomings is the inability to display sub-elements
for big brackets, braces and parenthesis, which HEVEA normally
outputs when it processes \left[, \right\} etc.
We (hopefully) expect Windows fonts to display more of
Unicode easily in a foreseeable future. As a temporary fix, we provide
a style file winfonts.hva.
Authors concerned by producing pages that do not look too ugly
when viewed through Windows browsers are thus advised to
load the file winfonts.hva.
For instance they can invoke HEVEA as:
# hevea winfonts.hva ...
At the moment, loading winfonts.hva
only changes the rendering
of LATEX big delimiters, avoiding the troublesome Unicode entities.
As an example, here are some examples of rendering.
delimiters
default
winfonts
\left\{ … \right\}
⎧
⎪
⎨
⎪
⎩
1
2
3
⎫
⎪
⎬
⎪
⎭
/
|
<
|
\
1
2
3
\
|
>
|
/
\left[ … \right]
⎡
⎢
⎢
⎣
1
2
3
⎤
⎥
⎥
⎦
1
2
3
\left( … \right)
⎛
⎜
⎜
⎝
1
2
3
⎞
⎟
⎟
⎠
/
|
|
\
1
2
3
\
|
|
/
\left\vert … \right\vert
⎪
⎪
⎪
⎪
1
2
3
⎪
⎪
⎪
⎪
1
2
3
\left\Vert … \right\Vert
⎪⎪
⎪⎪
⎪⎪
⎪⎪
1
2
3
⎪⎪
⎪⎪
⎪⎪
⎪⎪
1
2
3
More generally, it remains authors responsibility to be careful not to
issue too refined Unicode entities. To that aim, authors that target
a wide audience should first limit themselves to the most common
symbols (e.g. use \leq [≤]
in place of \preceq [≼]) and, above all,
they should control the rendering of their documents using several browsers.
HEVEA distribution includes .hva packages that are
implementations of LATEX packages.
Packages described in the “Blue Book” (makeidx,
ifthen, graphics —and graphicx!—,
color, alltt) are provided. Additionally, quite a
few extra packages are provided. I provide no full documentation for
these packages, users should refer to the first pages of the package
documentation, which can usually be found in the book [LATEX-bis],
in your local
LATEX installation or in a TeX CTAN-archive.
At the moment, most package options are ignored, except for the babel
package, where it is essential.
B.17.1 AMS compatibility
HEVEA amsmath package defines some of the constructs of the
amsmath package. At the moment, supported constructs are
the cases environment and matrix
environments [LATEX-bis, Section 8.4], the
environments for multi-line displayed
equations (gather,
split,…) [LATEX-bis, Section 8.5] and the
\numberwithin command [LATEX-bis, Section 8.6.2].
HEVEA provides support for the amssymb symbols using
Unicode. I found Unicode equivalent for most symbols. However, a few symbols
remain undefined (e.g.\varsubsetneqq).
B.17.2 The array and tabularx
packages
The array
package is described in
[LATEX-bis, Section 5.3] and in the local documentation of modern LATEX
installations.
It is a compatible extension of LATEX arrays (see B.10.2).
Basically, it provides new column specifications
and a \newcolumntype construct for user-defined column
specifications.
Table 1 gives a summary of the new column
specifications and of how HEVEA
implements them.
Table 1: Column specifications from the
array package
m{width}
Equivalent to the p column specification (the width
argument is ignored, entries are typeset in paragraph mode with
paragraph breaks being reduced to a single line break), except that the entries
are centered vertically.
b{width}
Equivalent to the p column specification, except that the entries
are bottom-aligned vertically.
>{decl}
Can be used before l, c, r,
p{…}, m{…} or
b{…}.
It inserts decl in front of the entries in the corresponding
column.
<{decl}
Can be used after l, c, r,
p{…}, m{…} or
b{…}.
It inserts decl after entries in the corresponding
column.
!{decl}
Equivalent to @{decl}
Note that centered, top-aligned or bottom-aligned
in the vertical direction, do not
have exactly the same meaning in LATEX and in html. However, the
aspect is the same when all columns agree w.r.t. vertical alignment.
Ordinary column types (c, l and r)
do not specify vertical alignment, which therefore becomes browser
dependent.
The >{decl} and <{decl}
constructs permit the encoding of TEX \cases macro as follows:
New column specifications are defined by the \newcolumntype
construct:
\newcolumntype{col}[narg]{body}
Where col is one letter, the optional narg is a
number (defaults to 0), and body is built up with
valid column specifications and macro-argument references
(#int).
Examples are:
\newcolumntype{C}{>{\bf}c}
\newcolumntype{E}[1]{*{#1}{c}}
\begin{tabular}{CE{3}}\hline
one & two & three & four \\
five & six & seven & eight \\ \hline
\end{tabular}
The column specification
C means that entries will be typeset centered and using bold
font, while the column specifications E{num}
stands for num centered columns. We get:
one
two
three
four
five
six
seven
eight
HEVEA implements column specifications with commands defined in the
\newcommand style. Thus, they have the same behaviour as regards
double definition, which is not performed and induces a warning
message.
Thus, a column specification that is
first defined in a macro.hva specific
file, overrides the document definition.
The tabularx
package [LATEX-bis, Section 5.3.5] provides a new tabular
environment tabularx and a new column type X. HEVEA
makes the former equivalent to tabular and the latter
equivalent to p{ignored}. By contrast with the
subtle array formatting that the tabularx package performs,
this may seem a crude implementation. However, rendering is usually
correct, although different.
More generally and from the html point of view such sophisticated
formatting is browser job in the first place.
However, the html definition allows suggested widths or heights for
table entries and table themselves.
From HEVEA point of view, drawing the border line between what can be
specified and what can be left to the browser is not obvious at all.
At the moment HEVEA choice is not to specify too much (in
particular, all length
arguments, either to column specifications or to the arrays
themselves, are ignored). As a consequence, the final, browser viewed,
aspect of arrays will usually be different from their printed
aspect.
B.17.3 The calc package
The calc
package enables using traditional, infix, notation for
arithmetic operations
inside the num argument to the
\setcounter{name}{num}
and \addtocounter{name}{num}
constructs (see [LATEX-bis, Section A.4])
The calc package provides a similar extension of the syntax
of the len argument to the \setlength and
\addtolength constructs.
HEVEA does not implement this extension, since it does not
implement length registers in the first place.
B.17.4 Specifying the document input encoding, the inputenc package
The inputenc
package enables LATEX to process a file
according to various 8 bits encodings, plus UTF-8.
The one used encoding is specified as an option while loading the package
\usepackage[encoding]{inputenc}.
At the moment, HEVEA recognises ten latin encodings
(from latin1 to latin10),
the koi8-r encoding,
the ascii encoding,
four windows encodings, the applemac encoding, and the
utf8 encoding.
It is important to notice that loading the inputenc package
alters the html document charset.
For instance if the latin9 input encoding is selected by:
\usepackage[latin9]{inputenc}
Then, the document charset is ISO-8859-15, which is an
enhanced version of ISO-8859-1 with some characters
for Œ, œ and €.
The rationale behind changing the output document charset at the same
time as changing the input encoding is to allow
non-ascii bytes in the input file to be replicated as
themselves in the output file.
However, one can change the document charset (and the output
translator) by using the internal command \@def@charset.
For instance, one can specify latin1 encoding, while
producing html pages in ascii:
See section 8.6 for a more thorough description of html
charset management.
The inputenc package also provides the
command \inputcoding{encoding} that
changes the input encoding at any time.
The argument encoding can be any of the options accepted
by \usepackage[encoding]{inputenc}.
The command \inputcoding of HEVEA
follows the behaviour of its LATEX counterpart, it the sense
that it obeys scope rules.
Notice that \inputcoding does not change the document output
encoding and charset.
B.17.5 More symbols
HEVEA implements the following packages: latexsymamssymb, textcomp (a.k.a. “Text companion”)
and eurosym (a nice € symbol in LATEX).
B.17.6 The comment package
The comment package provides two commands,
\excludecomment and \includecomment, for (re-)defining
new environments that ignore their content or that do nothing. The
comment environment is also defined as an environment of the first
kind.
B.17.7 Multiple Indexes with the index and
multind packages
HEVEA supports several simultaneous indexes, following the scheme
of the
index package,
which is present in modern LATEX distributions.
This scheme is backward compatible with the standard indexing scheme
of LATEX.
Support is not complete, but the most useful commands are available.
More precisely, HEVEA knows the following commands:
\newindex{tag}{ext}{ignored}{indexname}
Declare an index.
The first argument tag is a tag to select this index in other
commands; ext is the extension of the index information file
generated by LATEX (e.g., idx); ignored is ignored by
HEVEA; and indexname is the title of the index.
There also exists a
\renewindex commands that takes the same arguments and that can be
used to redefine previously declared indexes.
\makeindex
Perform
\newindex{default}{idx}{ind}{Index}.
\index[tag]{arg}
Act as the LATEX \index command except that the information
extracted from arg goes to the tag index.
The tag argument defaults to default, thereby yielding
standard LATEX behaviour for the \index command without an
optional argument.
There also exists a stared-variant \index* that Additionally
typesets arg.
\printindex[tag]
Compute, format and
output index whose tag is tag. The tag argument
defaults to default.
The multind package is
supported to some extend, but index is definitely to be
preferred.
B.17.8 “Natural” bibliographies, the natbib package
Implementation is quite complete and compatible
with version 8.0 of the natbib package
(with the keyval style command \setcitestyle).
Unimplemented features are the sorting and compression of references.
Automatic generation of an index of citations is handled, but
the current implementation probably is quite fragile.
B.17.9 Multiple bibliographies
The multibib package
HEVEA provides a slightly incomplete implementation of the
multibib package. The one non-implemented feature is the
simultaneous definition of more than one bibliography.
That is one cannot invoke \newcites as follows:
\newcites{suf1, suf2}{Title1, Title2}
Instead, one should perform to calls to the \newcites command:
\newcites{suf1}{Title1}\newcites{suf2}{Title2}
The chapterbib package
A basic implementation is provided. At the moment, you can
define one bibliography per included file and no toplevel
bibliography.
HEVEA implementation of this package recognises the option
sectionbib and provides the command \sectionbib
to change the sectioning command introduced by bibliographies.
B.17.10 Support for babel
B.17.10.1 Basics
HEVEA offers support for the LATEX package babel. When it reads the command
\usepackage[lang-list]{babel}
it loads babel.hva, and sends it the saved lang-list. The
file babel.hva then looks at each language (say x) in it, and loads x.hva, which offers support for the language x. As in LATEX, the last language in the list is selected as default. As an example the command
\usepackage[english,french,german]{babel}
would load babel.hva, then the files english.hva,french.hva,german.hva containing the respective definitions, and finally activate the definitions in german.hva and sets the current language to german.
B.17.10.2 Commands and languages
The following babel commands for changing and querying the language work as in LATEX :
\selectlanguage : to change the language
\iflanguage : to branch after comparing with current language
The language specific details are described in the corresponding
.hva file, just as in the .sty file for LATEX. Users
need to supply this file for their language, or modify/check the files
if they are already supplied with the distribution. The list of
languages is given below.
american
austrian
brazil
catalan
check
croatian
danish
dutch
english
esperanto
finnish
french
galician
german
italian
magyar
norsk
nynorsk
polish
portuguese
romanian
russian
slovak
slovene
spanish
swedish
turkish
B.17.10.3 Writing hva files
The languages for which .hva files are available with the
distribution are english, french, german, austrian, czech and portuguese. These
may need to be modified as not all accents and hyphenation techniques
are supported.
They can be written/modified as simple TEX files (see the section B.16.1.1 on writing TEX macros for details). As an example, one may also take a look at the file french.hva, which describes the details for french.
Note how all definitions are inside the definition for
\french@babel, which is the command that
\selectlanguage{french} would call. Similar commands need to be
provided (i.e.\x@babel in \x.hva for language
x).
Notice that it is wise to write the \x.hva in plain ascii only.
Some definitions may involve specifying Unicode characters, for doing
so, using the \@print@u is recommended (cf. Section 8.3).
The definition of Unicode characters can be found at
http://www.unicode.org/charts/.
Most language specific Unicode characters can be found in the first
few files.
This package in fact provides a enhanced \verb command that
can appear inside other command arguments.
This command is named \url,
but it can be used for any verbatim text, including DOS-like path
names.
Hence, one can insert urls in one’s document without worrying about
LATEX active characters:
This is a complicated url: \url{http://foo.com/~user#label%coucou}.
which gets typeset as: “This is a complicated url: http://foo.com/~user#label%coucou.”
The main use for the \url command is to specify urls as arguments to
HEVEA commands for hyperlinks (see section 8.1.1):
\hevea{} home page is
\ahrefurl{\url{http://hevea.inria.fr/}}
However the \url command is fragile, as a consequence it
cannot be used inside \footahref first argument (This is a
LATEX problem, not an HEVEA one).
The url package solves this problem by providing the
\urldef command
for defining commands whose body is typeset by using \url:
\urldef{\heveahome}{\url}{http://hevea.inria.fr/}
Such a source defines the robust command \heveahome as the
intended url.
Hence the following source works as expected:
Have a look at \footahref{\heveahome}{\hevea{} home page}
Using \url inside command definitions with a
#i argument is a bad idea, since
it gives “verbatim” a rather random meaning.
Unfortunately, in some situations (e.g, no %, no #),
it may work in LATEX. By
contrast, it does not work in HEVEA. In such situations,
\urldef should be used.
HEVEA implementation is somehow compatible at the “programming level”.
Thus, users can define new commands whose argument is understood
verbatim. The urlhref.hva style file
from the distribution
takes advantage of this to define the \url command, so that it both
typesets an url and inserts a link to it.
\input{urlhref.hva}
Have a look at \url{http://hevea.inria.fr/}
It yields “Have a look at http://hevea.inria.fr/”.
The urlhref.hva
style file (which is an HEVEA style file and not a LATEX
style file) can be adequate for bibliographic references,
which often use \url for its typesetting power.
Of course, loading urlhref.hva only makes sense when
all arguments to \url are urls…
B.17.12 Verbatim text: the moreverb and
verbatim packages
These two packages provide new commands and environments for
processing verbatim text.
I recommend using
moreverb
rather than verbatim,
since HEVEA implementation is more advanced for the former package.
B.17.13 Typesetting computer languages: the listings package
I strongly recommend the
listings package.
Learning the user interface requires a little effort, but it is worth
it.
HEVEA features a quite compatible implementation, please refer to
the original package documentation.
Do not hesitate to report discrepancies.
Note that HEVEA does not produce very compact
html in case you use this package.
This can be cured by
giving hevea the command-line option -O
(see C.1.1.4).
The lstlisting environment is styled through
an homonymous style class (see 9.2 and 9.3) and
most lstlisting environments get translated to div
elements with the appropriate \getenvclass{lstlisting} class,
which, by default is lstlisting.
A few points deserve mention:
The definition of default style class lstlisting includes
the important declarations
font-family:monospace; and white-space:pre;, which, more or less,
specify non-proportional font and mandatory line breaks.
In case you replace lstlisting by another style class (by
\setenvclass{lstlisting}{another one}), your
alternate definition should probably feature an identical
specification. Otherwise, rendering would be poor, as regards spacing
and line breaks.
Here is how specific listings are styled.
We first define a new environment to typeset programs written in the C
language, by using the command \lstnewenvironment:
The command
\lstnewenvironment{name}{starting
code}{ending code} is from the
listings package, with similar semantics.
In the starting code above, the fragment
\setenvclass{lstlisting}{clisting} instructs HEVEA to
use the style class clisting locally (notice that it could just
be another name). The style class clisting is defined in
the document preamble as follows:
Typesetting a C listing with a black border on the left is then as
simple as:
\begin{clisting}
/* Compute, guess what! */
int fact(int n) {
int r = 1 ;
for ( ; n > 0 ; n--) {
r *= n ;
}
return r ;
}
\end{clisting}
The final result is:
/* Compute, guess what! */int fact(int n) {
int r = 1 ;
for ( ; n > 0 ; n--) {
r *= n ;
}
return r ;
}
When listings are framed, that is, when some
frame=… or background=… keyval
specifications are active, they no longer get translated to div
elements.
Instead they get translated to one cell tables whose td
and table elements
are styled through style classes lstlisting and
lstframe, respectively. Of course, those two style classes
follow the usual \setenvclass/\getenvclass mechanism.
That way, one can for instance center all framed listings by issuing
the following declaration in the document preamble:
\newstyle{.lstframe}{margin:auto;}
Notice that the default style class lstframe is empty.
Unfortunately the white-space:pre; style declaration is still a
bit young, and some browsers implement it in rather incomplete
fashion. This is particularly true as regards text copy-pasted from
browser display. In case you want to provide your readers with easy
copy-paste of listings, you can, by issuing the command
\lstavoidwhitepre in the document preamble. Then,
white-space:pre; is not used any longer: spaces get rendered
by non-breaking space entities and line-breaks by <BR> elements,
which significantly increase output size. However, as a positive
consequence, display remains correct and text copy-pasted from browser
display indeed possesses the line-breaks shown in display.
Those two packages provide LATEX users with the
possibility to typeset tabular material over several
pages [LATEX-bis, Section 5.4]. Of course, HEVEA
does not care much about physical pages.
Thus the supertabular
and longtable environments are rendered more or less
as tabular environments inside table environments.
B.17.15 Typesetting inference rules: the
mathpartir package
The mathpartir package, authored by D. Rémy, essentially
provides two features:
An environment mathpar for typesetting a sequence of math formulas in mixed horizontal and vertical mode. The environment selects the best arrangement according to the line width, exactly as paragraph mode does for words.
A command \inferrule (and its starred variant) for
typesetting inferences rules.
We give a short description, focussing on HEVEA-related details.
Users are encouraged to refer to the
original
documentation of the package.
In the following, comments on rule typesetting apply to HEVEA output
and not to LATEX output.
B.17.15.1 The mathpar environment
In its LATEX version, the mathpar environment is a
“paragraph mode for formulas”. It allows to typeset long list of
formulas putting as many as possible on the same line:
\begin{mathpar}
A-Formula \and
Longer-Formula \and
And \and The-Last-One
\end{mathpar}
A−Formula
Longer−Formula
And
The−Last−One
In the example above, formulas are separated with \and. The
LATEX implementation also changes the meaning of paragraph breaks
(either explicit as a \par command or implicit as a blank line)
to act as \and. It also redefines the command \\ as
an explicit line-break in the flow of formulas.
The HEVEA version is simplistic:
Formulas are typeset in math display
mode,
\and separators always produce horizontal space, while
\\ always produce line-breaks.
However, when prefixed by \hva the meaning of explicit
separators is reversed: that is,
\hva\and produces a line-break, while \hva\\
produces horizontal space.
Hence, we can typeset the previous example on two lines:
\begin{mathpar}
A-Formula \and
Longer-Formula \hva\and
And \and The-Last-One
\end{mathpar}
A−Formula
Longer−Formula
And
The−Last−One
It is to be noticed that the LATEX version of the package defines
\hva as a no-op, so as to allow explicit instructions given to
HEVEA not to impact on the automatic typesetting performed by LATEX.
B.17.15.2 The inferrule macro
The \inferrule macro is designed to typeset inference rules. It
should only be used in math mode (or display math mode). It takes
three arguments, the first being optional, specifying the label,
premises, and conclusions respectively. The premises and the
conclusions are both lists of formulas, and are separated by
\\.
A simple example of its use is
\inferrule
[label]
{one \\ two \\ three \\ or \\ more \\ premises}
{and \\ any \\ number \\ of \\ conclusions \\ as \\ well}
which gives the following rendering:
label
onetwothreeormorepremises
andanynumberofconclusionsaswell
Again, HEVEA is simplistic. Where LATEX performs
actual typesetting, interpreting \\ as horizontal or
vertical breaks, HEVEA always interpret \\ as an
horizontal break. In fact HEVEA interpret all separators
(\\, \and) as horizontal breaks, when
they appear in the arguments of the \inferrule command.
Nevertheless prefixing separators with \hva yields vertical
breaks:
\inferrule
{aa \hva\\ bb}
{dd \\ ee \\ ff}
aa
bb
ddeeff
The color of the horizontal rule that separates the premises and
conclusions can be changed by redefining the command
\mpr@hhline@color. This color must be specified as a low-level
color (cf. Section B.14.2.2).
B.17.15.3 Options
By default, lines are centered in inference rules. However, this can be changed either by using \mprset{flushleft} or \mprset{center}, as shown below.
The mathpartir package provides a starred variant
\inferrule*. In LATEX, the boxes
produced by \inferrule and \inferrule* differ as regards
their baseline, the second being well adapted to derivation trees.
All this is irrelevant to HEVEA,
but \inferrule* remains of interest because of its interface:
the optional argument to the \inferrule* command is a list of
key=value pairs in the style of
keyval.
This makes the variant command much more flexible.
key
Effect for value v
before
Execute v before typesetting the rule.
Useful for instance to change the maximal width of the rule.
left
Put a label v on the left of the rule
Left
Idem.
right
As left, but on the right of the rule.
Right
As Left, but on the right of the rule.
lab
Put a label v above the inference rule, in the style
of \inferrule.
Lab
Idem.
vdots
Raise the rule by v and insert vertical dots, the length
argument is translated to a number of line-skips.
Additionally, the value-less key center centers premises and
conclusions (this is
the default), while flushleft commands left alignment of
premises and conclusions (as \mprset{flushleft} does).
Other keys defined by the LATEX package exist and are parsed, but
they perform no operation.
This package should be present in modern latex installations.
Basically, the package defines a boolean register pdf, whose
value is true for tools that produce PDF (such as
pdflatex) and false for tools that produce DVI
(such as latex).
The hevea version of the package simply defines the boolean
register pdf with initial value true. Command-line option
-pdf is also added to imagen command-line
options (by using the command \@addimagenopt, see
Section 10.7). As a result, imagen will
normally call pdflatex in place of latex.
In case standard latex processing in imagen is
wished, one can issue the command \pdffalse after loading the
ifpdf package and before \begin{document}. Then, no
command line option is added.
Hence, to achieve latex processing of the image
file, while still loading the ifpdf package, one writes:
\usepackage{ifpdf}
%HEVEA\pdffalse
B.17.17 Typesetting Thai
HEVEA features an implementation of Andrew Seagar’s technique
for Thai in LATEX,
by the means of the package thai.hva in the distribution.
As regards input encoding, Thai users of HEVEA could (perhaps) use
\usepackage[utf8]{inputenc}.
However, the typesetting of Thai is more subtle than just proper
characters. For that reason, Thai in LATEX is better performed by
another technique, which HEVEA supports. See this specific
document.
B.17.18 Hanging paragraphs
The hanging package is implemented.
HEVEA implementation consists of no-ops, except for the
hangparas environment, which is partially implemented.
Assume the following usage of hangparas:
\begin{hangparas}{wd}{n}
…\end{hangparas}
where wd is a length that makes sense both for LATEX
and CSS (typically 2ex).
Then html output will reproduce LATEX output for n=1, regardless
of the given value of argument n.
That is, in any paragraph inside the environment,
all lines except the first get indented by wd.
B.17.19 The cleveref package
The cleveref package
attempts (and mostly succeeds) typesetting references
cleverly. Its main feature is a \cref command that accepts several,
comma separated, label references and typesets them as a list
(which can be one-element long, of course) prefixed with sectional unit names.
The HEVEA implementation is quite complete, but it does not support some
of the subtleties of the LATEX implementations, especially as regards
customisation.
B.17.20 Other packages
The fancyverb and colortbl
packages are partly implemented.
The xspace package is implemented,
in simple cases, rendering is satisfactory, but beware: HEVEA
differs significantly from TEX, and discrepancies are likely.
The import package is partially implemented:
all starred commands are missing.
The booktabs package is implemented.
This package provides nicer rulers in tables as specific commands.
HEVEA defines those as no-ops.
Part C
Practical information
C.1 Usage
C.1.1 HEVEA usage
The hevea command has two operating modes, normal mode and
filter mode.
Operating mode is determined by the nature of the last command-line
argument.
C.1.1.1 Command line arguments
The hevea command interprets its arguments as names of
files and attempts to process them.
Given an argument filename there are two cases:
If filename is base.tex or
base.hva,
then a single attempt to open filename is made.
In other cases,
a first attempt to open filename.tex is made.
In case of failure, a second attempt to open filename is made.
In all attempts, implicit filenames are
searched along hevea search path, which consist in:
the current directory “.”,
user-specified directories (with the -I command-line
option),
hevea library directory.
one of the sub-directories html, text or
info from hevea library directory, depending upon
hevea output format,
The hevea library directory is fixed at compile-time
(this is where hevea library files are installed)
and typically is /usr/local/lib/hevea.
However, this compile-time value can be overridden
by setting the HEVEADIR shell environment variable.
In all cases, the value of hevea library directory can
be accessed from the processed document as the value of the command
\@hevealibdir.
C.1.1.2 Normal mode
If the last argument has an extension that is different from
.hva or has no extension,
then it is interpreted as the name of the main input file.
The main input file is the document to be translated and normally
contains the \documentclass command.
In that case two basenames are defined:
The input basename, basein,
is defined as the main input file name,
with extension removed when present.
The output basename, baseout, is basein
with leading directories omitted. However the output basename can be
changed, using the -o option (see below).
HEVEA will attempt to load the main input file.
Ancillary files from a previous run of LATEX
(i.e..aux, .bll and .idx files)
will be searched as basein.ext.
The output base name governs all files produced by HEVEA.
That is, html output of HEVEA normally goes to the file
baseout.html,
while cross-referencing information goes into
baseout.haux. Furthemore,
if an image file is generated (cf. section 6), its
name will be baseout.image.tex.
Thus, in the simple case where the hevea command is invoked
as:
# hevea file.tex
The input basename is file and the output basename also is
file. The main input file is searched once along hevea
search path as file.tex.
html output goes into file
file.html, in the current directory.
In the more complicated case where the hevea command is invoked
as:
# hevea ./dir/file
The input base name is ./dir/file and the output basename is
file. The main input file is loaded by first attempting to
open file ./dir/file.tex, then file ./dir/file.
html output goes into file file.html, in the current directory.
Finally, the output base name can be a full path,
but you have to use option -o.
For instance, we consider:
# hevea -o out/out.html file.tex
Then, html output goes into out/out.html — notice
that directory out must exist.
Furthermore, hevea output base name is out/out.
This means that hevea generates files
out/out.haux, out/out.image.tex etc.
The article.hva, seminar.hva, book.hva and
report.hva
base style files from HEVEA library are special.
Only the first base style file is loaded and the
\documentclass command has no effect when a base style file is
already loaded. This feature allows to override the document base style.
Thus, a document file.tex can be translated using the
article base style as follows:
# hevea article.hva file.tex
C.1.1.3 Filter mode
If there is no command-line argument, or if the last command-line
argument has the extension .hva, then
there is neither input base name nor output base name,
the standard input is read and
output normally goes to the standard output.
Output starts immediately, whithout waiting for \begin{document}.
In other words hevea acts as a filter.
Please note that this operating mode is just for translating
isolated LATEX constructs.
The normal way to translate a full document file.tex being
“heveafile.tex” and not
“hevea < file.tex > file.html”.
C.1.1.4 Options
The hevea command recognises the following options:
-version
Show hevea version and exit.
-v
Verbose flag, can be repeated to increase
verbosity. However, this is mostly for debug.
-dv
Add border around some of the block-level
elements issued. Specifically, all div and p are bordered,
while the structure of displayed material is also shown.
-s
Suppress warnings.
-Idirname
Add dirname to the search path.
-oname
Make name the output basename.
However, if name is base.html, then
the output basename is base.
Besides, -o - makes HEVEA output to standard output.
-efilename
Prevent hevea from loading any file
whose name is filename. Note that this option applies to all
files, including hevea.hva and base style files.
-fix
Iterate HEVEA until a fixpoint is found.
Additionally, images get generated automatically.
-O
Optimise html by calling esponja (see
section C.1.3).
-execprog
Execute file prog and read the
output. The file prog must have execution permission and is
searched by following the searching rules of hevea.
-francais
Deprecated by babel support. This
option issues a warning message.
-help
Print version number and a short help message.
The following options control the html code produced by
hevea. By default, hevea outputs a page encoded in
US-ASCII with most symbols rendered as html or numerical Unicode
entities.
-entities
Render symbols by using entities. This is the default.
-textsymbols
Render symbols by English text.
-moreenties
Enable the output of some infrequent entities. Use
this option to target browsers with wide entities support.
-mathml
Produces MathML output for equations, very
experimental.
-pedantic
Be strict in interpreting html
definition. In particular, this option disable size and color changes inside
<PRE>… </PRE>, which are otherwise performed.
The following options select and control alternative output formats
(see section 11):
-text
Output plain text. Output file
extension is .txt.
-info
Output info format. Output file extension
is .info.
-wwidth
Set the line width for text or info
output, defaults to 72.
Part A of this document is
a tutorial introduction to HEVEA,
while Part B is the reference manual of HEVEA.
C.1.2 HACHA usage
The hacha command interprets its argument
base.html as the name of
a html source file to cut into pieces.
It also recognises the following options:
-v
Be a little verbose.
-ofilename
Make HACHA output go into file
filename (defaults to index.html).
Additionally, if filename is a composite filename,
dir/base, then all files outputted by HACHA will
reside in directory dir.
-tocbis
Another style for table of contents:
sub-tables are replicated at the beginning of
every file.
-tocter
Like -tocbis above, except that
sub-tables do not appear in the main table of contents
(see Section 7.2.3).
-nolinks
Do not insert Previous/Up/Next links in
generated pages.
-hrf
Output a base.hrf file, showing
in which output files are the anchors from the input file gone.
The format of this summary is one
“anchor\tfile” line per anchor.
This information may be needed by other tools.
-help
Print version number and a short help message.
Section 7 of the user manual explains how to
alter HACHA default behaviour.
C.1.3 esponja usage
The program esponja
is part of HEVEA and is designed to optimise hevea
output.
However, esponja can also be used alone to optimise
text-level elements in html files.
Since esponja fails
to operate when it detects incorrect html, it can be used as a
partial html validator.
C.1.3.1 Operating mode
The program esponja interprets its arguments as names of
files and attempt to process them.
It is important to notice that esponja will replace files
by their optimised versions, unless instructed not to do so with
option -n.
Invoking esponja as
# esponja foo.html
will alter foo.html.
Of course, if esponja does not succeed in making foo.html any
smaller or if esponja fails, the original foo.html
is left unchanged.
Note that this feature allows to optimise all html files in a given directory
by:
# esponja *.html
C.1.3.2 Options
The command esponja recognises the following options:
-v
Be verbose, can be repeated to increase verbosity.
-n
Do not alter input files. Instead, esponja
output for file input.html goes to file
input.esp. Option -n implies option -v.
-u
Output esponja intermediate version of html.
In most occasions, this amounts to pessimize instead of to optimise.
It may yield challenging input for other html optimisers.
C.1.4 bibhva usage
The program bibhva
is a simple wrapper, which basically
forces bibtex into accepting a .haux file as input
and producing a .hbbl file as output.
Usage is
bibhva bibtex-optionsbasename.
C.1.5 imagen usage
The command imagen is a simple shell script that translates
a LATEX document into many .png images.
The imagen script relies on much software to be installed on
your computer, see Section C.4.1.
It is a companion program of HEVEA, which must have been previously run as:
# hevea… base.tex
or # hevea… -obase.html…
In both cases, base is HEVEA output basename.
When told to do so (see section 6)
HEVEA echoes part of its input into
the base.image.tex file.
The imagen script should then be run as:
# imagenbase
The imagen script produces
one basennn.png image file per page in the
base.image.tex file.
This is done by first calling latex on
base.image.tex, yielding one dvi
file.
Then, dvips translates this file into one single Postscript file that
contains all
the images, or into one Postscript file per image,
depending upon your version of dvips.
Postscript files are interpreted by ghostscript (gs) that
outputs ppm images, which are then fed into a series of
transformations that change them into .png files.
The imagen script recognises the following options:
-magnnnn
Change the enlarging ratio that is applied
while translating DVI into Postscript.
More precisely, dvips is run with -xnnnn
option.
Default value for this ration is 1414, this means
that, by default, imagen magnifies LATEX output by a factor of
1.414.
-extracommand
Insert command as an additional
stage in imagenppm to png production chain.
command is an Unix filter that expects a ppm image
in its standard input and outputs a ppm image on its standard output.
A sensible choice for command is one command from the
netpbm package, several such commands piped together, or
various invocations of the convert command from ImageMagick.
-quantnumber
Add an extra color quantisation step
in imagenppm image production chain, where
number is the maximal number of colors in the produced
images. This option may be needed as a response to a failure in the
image production chain. It can also help in limiting image files size.
-png
Output PNG images. This is the default.
-gif
Output GIF images in place of PNG images.
GIF image files have a .gif extension.
Note that hevea should have been previously run as
hevea gif.hvabase.tex (so that the proper
.gif filename
extension is given to image file references from within the html
document).
-pnm
Output PPM images. This option mostly serves
debugging purposes. Experimented users can also take advantage
of it for performing additional image transformation or
adopting exotic image formats.
-targ
Pass option “-targ” to
dvips.
For instance, using “-t a3” may help when images are
truncated on the right.
-pdf
Have imagen call pdflatex instead
of latex.
The first three options enable users to correct some misbehaviours.
For instance, when the document base style is seminar, image
orientation may
be wrong and the images are too small. This can be cured by invoking
imagen as:
# imagen -extra "pnmflip -ccw" -mag 2000base
Notice that hevea calls imagen by itself,
when given the command-line option -fix.
In that situation, the command-line options of imagen can
be controlled from source file by using the
command \@addimagenopt (see Section 10.7).
C.1.6 Invoking hevea, hacha and imagen
In this section, we give a few sequence of (Unix) commands to build
the html version of a document in various
situations. The next section gives a few
Makefile’s for similar situations.
We translate a file doc.tex
that requires a specific style file doc.hva.
The file is first translated into doc.html by hevea,
which also reads
the specific style file doc.hva.
Then, hacha cuts doc.html into several,
doc001.html, doc002.html, etc. also producing the
table of links file index.html.
# hevea -fix doc.hva doc.tex
# hacha doc.html
Thanks to the command-line option -fix, hevea runs the
appropriate number of times automatically.
In case hevea produces a non-empty doc.image.tex
file, then hevea calls imagen by itself
(because of option -fix).
Hence, the above sequence of two commands is also appropriate in
that situation.
In case some problem occurs, it is sometime convenient to
run imagen by hand.
It is time not to use the option -fix.
# rm -f doc.image.tex
# hevea doc.hva doc.tex
Now, hevea normally has shown the imagen
command line that it would have run, if it had been given
the option -fix.
For instance, if doc.hva includes \input{gif.hva}, then
hevea shows the following warning:
HeVeA Warning: images may have changed, run 'imagen -gif doc'
Now, one can run imagen as it should be.
It is sometime convenient not to clobber the source directory with
numerous target files.
It suffices to instruct
hevea and hacha to output files in a
specific directory, say doc.
Notice that hevea does not create the target directory
doc: it must exist before hevea runs.
Again, in case hevea calls imagen,
image generation should proceed smoothly and the final files
doc001.png, doc002.png, … should go into
directory doc.
In all situations, while installing files to their final destination,
it is important not to forget any relevant files.
In particular, in addition to the root file
(index.html), contents files (doc001.html,
doc002.html, etc.) and images
(doc001.png, doc002.png, etc.),
one should not forget the arrow images and the
style sheet generated by hacha
(contents_motif.gif, next_motif.gif,
previous_motif.gif and doc.css).
As a consequence, producing all files into the subdirectory
doc may be a good idea, since then one easily install all
relevant files by copying doc to a public destination.
# cp -r doc $(HOME)/public_html
However, one then also installs the auxiliary files of hevea,
and hevea output file doc.html, which is no longer
useful once hacha has run.
Hence, those should be erased beforehand.
Note that the clean rule removes all the doc001.html,
doc002.html, etc. and doc.css files produced by
hacha.
Also note that make clean also removes the
doc.haux, doc.hind and doc.htoc files, which are HEVEA
auxiliary files.
When the image file feature is used, one can use the
following, extended, Makefile:
The above Makefile directly produces html and PNG files
into the final directory $(HOME)/public_html/$(DOC).
The new partialclean entry erases files that are not
useful anymore, once imagen and hacha have
performed their tasks.
However, most often, it is more appropriate to build html and PNG files
in a specific directory, and then to copy them to their final
destination.
...
#document base name
DOC=doc
DIR=$(DOC)
BASE=$(DIR)/$(DOC)
INSTALLDIR=$(HOME)/public_html/$(DOC)
...
install: partialclean
cp $(DIR)/* $(INSTALLDIR)
...
C.2 Browser configuration
By default, HEVEA does not anymore use the FACE=symbol
attribute to the <FONT ...> tag. As a consequence, browser
configuration is no longer needed.
HEVEA now extensively outputs Unicode entities.
This first means that HEVEA targets modern browsers with
decent unicode support, and only those.
In case your browser is recent and that you nevertheless experience display
problems on HEVEA-generated pages, see the excellent
Alan Wood’s Unicode Resources.
It may help to understand display problems and even to solve them
by configuring browsers or installing some fonts.
HEVEA can be freely used and redistributed without modifications.
Modifying and redistributing HEVEA implies a few constraints.
More precisely, HEVEA is distributed under the terms of the
Q Public License, but HEVEA binaries include the Objective Caml
runtime system, which is distributed under the Gnu Library General
Public License (LGPL).
See the LICENSE file for details.
The programs hevea and hacha are written in
Objective Caml. Thus, you
really need Objective Caml (the more recent version, the better) to
compile them.
However, some binary distributions exist, which are managed by
people other than me (thanks to them).
Links to some of these distributions appear in HEVEA home page.
HEVEA users may instruct the program not to process a
part of the input (see section 6). Instead, this part is
processed into a bitmap file and HEVEA outputs a link to the image file.
LATEX source is changed into .png images by the imagen
script, which basically calls, LATEX, dvips,
ghostscript
and the convert command from the image processing package
ImageMagick.
To benefit from the full functionality of HEVEA, you need all
this software. However, HEVEA runs without them, but then you will
have to produce images by yourself.
C.4.2 Principles
The details are given in the README
file from the distribution.
Basically, HEVEA should be given a library
directory. The installation procedure stores the hevea.hva
and base style files in this directory.
There are two compilation modes, the opt mode selects the
native code OCaml compiler ocamlopt, while the byte
mode selects the bytecode OCaml compiler ocamlc.
In HEVEA case, ocamlopt produces code that is up to three
times as fast as the one produced by ocamlc.
Thus, default compilation mode is opt, however it may be the
case on some systems that only ocamlc is available.
Note that, when installing HEVEA from the source distribution, the
hevea.sty file is simply copied to HEVEA
library directory. It remains users responsibility to
make it accessible to LATEX.
C.5 Other LATEX to html translators
This short section gives pointers to a few other translators. I
performed not extensive testing and make no thorough comparison.
LaTeX2html
LaTeX2html is a full system. It is written in perl and
calls LATEX when in trouble.
As a consequence, LaTeX2html is powerful but it may fail on
large documents, for speed and memory reasons.
More information on LaTeX2html can be found at
The principle behind TTH is the same as the one of
HEVEA: write a fast translator as a lexer, use symbol fonts and
tables. However, there are differences, TTH accepts both TEX and
LATEX source,
TTH is written in C and the full source is not available
(only lex output is available).
Additionally, TTH insist on not using any kind of LATEX
generated information and will show proper cross-reference labels,
even when no .aux file is present.
TTH output is a single document,
whereas HACHA can cut the output of HEVEA into several files.
(however there exists a commercial
version of TTH that provides this extra functionality).
TTH can be found at
TeX4ht is a highly configurable TeX-based authoring system dedicated
mainly to produce hypertext.
It interacts with TeX-based applications through style files
and postprocessors, leaving the processing of the source files
to the native TeX compiler. As a result, TeX4ht may be more powerful
than HEVEA, but may also be more difficult to configure.
More information on TeX4ht can be found at:
The htmlgen translator is specialized
for producing the Caml manuals. This is HEVEA direct ancestor and I
owe much to its author, X. Leroy. See [htmlgen] for a description
of htmlgen and a (bit outdated) discussion on LATEX to
html translation.
C.6 Acknowledgements
The following people contributed to HEVEA development:
Tibault Suzanne authored the HTML 5 generator that now is
the default generator of HEVEA.
Abhishek Thakur implemented most of the new features of version
1.08, including, translations of symbols to Unicode entities,
the babel package, and style sheet support.
Christian Queinnec wrote an extra lexer to translate code
snippets produced by its tool
VideoC
for writing pedagogical documents on programming.
The very principle he introduced for interfacing the videoc
lexer with HEVEA main lexer is now used extensively throughout
HEVEA source code.
Pierre Boulet, by using HEVEA as a stage in his tool
MlDoc
for documenting Objective Caml source code, forced me into debugging
HEVEA implementation of the alltt environment.
Nicolas Tessaud implemented the -text and -info
output modes (see section 11).
Georges Mariano asked for
many feature, and argued a lot to have them implemented.
X. Leroy.
Lessons learned from the translation of documentation
from LATEX to html.
ERCIM/W4G Int. Workshop on WWW Authoring and Integration
Tools, 1995.
Available on the web at
http://cristal.inria.fr/~xleroy/w4g.html
Bert Bos,
Tantek Çelik,
Ian Hickson
and
Håkon Wium Lie.
Cascading Style Sheets, Level 2 Revision 2 Specification. Available on
the web at
http://www.w3.org/TR/REC-CSS2/, 2011.
In some situations,
HEVEA uses some of the ancillary files generated by LATEX.
More precisely, while processing file doc.tex,
the following files may be read:
.aux
The file doc.aux contains
cross-referencing information, such as figure or section numbers.
If this file is present, HEVEA reads it and put such numbers (or
labels) inside
the links generated by the \ref command. If the .aux
file is not present, or if the hevea command is given the
-fix option, HEVEA will instead use .haux
files.
.haux
Such files are HEVEA equivalents of
.aux files. Indeed, they are .aux files tailored to
HEVEA needs.
Two runs of HEVEA might be needed to get cross references right.
.htoc
This file contains a formatted table of
contents. It is produced while reading the .haux file.
As consequence a table of contents is available only when the
.haux file is read.
.hbbl
The doc.hbbl file
is generated by bibhva from doc.haux.
When present, it is read by the \bibliography command.
.bbl
The doc.bbl file is
generated by BibTEX from doc.aux.
When present, and if no doc.hbbl exists,
doc.bbl is read by the \bibliography command.
.hidx and .hind
HEVEA computes its own indexes, using .hidx files for
storing index references and, using .hind files
for storing formatted indexes.
Index formatting significantly departs from the one of LATEX.
Again, several runs of HEVEA might be needed to get indexes right.
HEVEA does not fail when it cannot find an auxiliary file.
When another run of HEVEA is needed, a warning is issued,
and it is user’s responsibility to rerun HEVEA.
However, the convenient -fix command-line option instructs
HEVEA to rerun itself, until it believes it has reached stable state.
B.11.2 Cross-References
The LATEX commands \label and \ref are changed by HEVEA
into html anchors and local links, using the “a” element.
Additionally, numerical references to sectional units, figures,
tables, etc. are shown, as they would appear in the .dvi file.
Numerical references to pages (such as generated by \pageref)
are not shown; only an link is generated.
The anchor used is the label argument to
\label{label}.
More precisely, \label{label} translates to
<a id="label"></a>;
while \ref{label}
translates to <a name="#label">nnn</a>,
where nnn is the appropriate numerical reference to a section.
As a consequence spaces are better avoided in label.
Starting with HEVEA version 2.04,
the html anchors used by \label and \ref cannot
differ from the arguments to these commands anymore.
Moreover,
when \label{label} occurs
inside the argument of a sectioning command (i.e. in section title,
as recommended by section B.4.1),
then HEVEA and HACHA will use label
as the “id” attribute of the corresponding section.
For instance, the LATEX source of this very section is:
Notice that no <a id="cross-reference"></a> appears above.
Instead id="cross-reference" appears
in the enclosing h3 header element.
While processing a document doc.tex,
cross-referencing information can be computed in two different, mutually
exclusive, ways, depending
on whether LATEX has been previously run or not:
If there exists a file
doc.aux and that hevea has not been
given the command-line option -fix,
then cross-referencing information is extracted
from that file. Of course, the doc.aux file
has to be up-to-date, that is,
it should be generated by running LATEX as many times as necessary.
(For HEVEA needs, one run is probably sufficient).
If no doc.aux file exists or if hevea
has been given the -fix command-line option, then HEVEA
expect to find cross-referencing information in the file
doc.haux.
The second option is recommended.
When using its own doc.haux file,
HEVEA will output a
new doc.haux file at the end of its processing.
This new doc.haux file contains actualised
cross referencing information.
Hence, in that case, HEVEA may need to run twice to get
cross-references right.
Note that, just like LATEX,
HEVEA issues a warning then the cross-referencing information it
generates differs from what it has read at start-up, and that it does
not fail if doc.haux does not exist.
Observe that if a non-correct doc.aux file is
present, then cross-references will apparently be wrong. However the
links are correct.
B.11.3 Bibliography and Citations
The \cite macro is supported. Its optional argument is
correctly handled. Citation labels are extracted from the
.aux file if present, from the .haux file otherwise.
Note that these labels are put there by LATEX in the first case,
and by HEVEA in the second case, when they process the
\bibitem command.
Using BibTEX
All BibTEX related commands exist and echo the appropriate
information into the .haux file.
In particular, the \bibliography command exists and attempts to load the
formatted bibliography, i.e. to load the .hbbl file.
The .hbbl file is produced from the .haux file by
the companion program bibhva (see C.1.4).
To include the bibliographic references extracted from .bib
databases, it should normally suffice to do:
# hevea doc.tex
# bibhva doc
# hevea doc.tex
In case no .hbbl file exists,
the \bibliography command attempts to load
the .bbl file normally used while combining LATEX and
BibTEX. Thus, another way to extract bibliographic references from
.bib databases is:
# latex doc.tex
# bibtex doc
# hevea doc.tex
In case both files exist,
notice that loading the .hbbl file has priority over
loading the .bbl file.
B.11.4 Splitting the Input
The \input and \include commands exist and they perform
exactly the same operation of searching (and then processing) a file,
whose name is given as an argument.
See section C.1.1.1 on how HEVEA searches files.
However, in the case of the \include command, the file is
searched only when previously given as an argument to
the \includeonly command.
Note the following features:
TEX syntax for \input is not supported. That is,
one should write \input{filename}.
If filename is excluded with the -e command-line
option (see section C.1.1.4),
then HEVEA does not attempt to load filename.
Instead, it
echoes \input{filename} and
\include{filename} commands into the
image file. This sounds complicated, but this is what you want!
HEVEA does not fail when it cannot find
a file, it just issues a warning.
The \listfiles command is a null command.
B.11.5 Index and Glossary
Glossaries are not handled (who uses them ?).
While processing a document doc.tex, index
entries go into the file doc.hidx, while
the formatted index gets written into the file
doc.hind.
As with LATEX, two runs of HEVEA are normally needed to format
the index.
However, if all index producing commands (normally \index)
occur before the index formatting command (normally
\printindex), then only one run is needed.
As in LATEX, index processing is not enabled by default and
some package has to be loaded explicitly in the
document preamble.
To that aim, HEVEA provides the standard package makeidx,
and two extended packages that allow the production of several indexes
(see section B.17.7).
Formatting of indexes in HEVEA departs from LATEX behaviour.
More precisely the theindex environment does not exist.
Instead, indexes are formatted using special
indexenv environments.
Those details do not normally concern users.
However, the
number of columns in the presentation of the index can be controlled
by setting the value of the indexcols counter (default value
is two).
B.11.6 Terminal Input and Output
The \typeout command echos its argument on the
terminal, macro parameter #i are replaced by their values.
The \typein command is not supported.
HEVEA can be controlled by writing LATEX code. In this section,
we examine how users can change HEVEA default behaviour or add
functionalities. In all this section we assume that a document
doc.tex is processed, using a private command file
macros.hva. That is, HEVEA is invoked as:
# hevea macros.hva doc.tex
The general idea is as follows: one redefines LATEX constructs in
macros.hva, using internal commands. This requires a good
working knowledge of both LATEX and html.
Usually, one can avoid internal commands, but then, all command
redefinitions interact, sometimes in very nasty ways.
10.1 Simple changes
Users can easily change the rendering of some constructs. For
instance, assume that all quotations in a text should be
emphasised. Then, it suffices to put the following re-declaration in
macros.hva:
In some sense, this second
solution is easier, when one already knows
how to customise LATEX. However, this is less safe, since the definition of
\em can be changed elsewhere.
There is yet another solution that takes advantage of style sheets.
One can also add this line to the macros.hva file:
\newstyle{.quote}{font-style:oblique;}
This works because the environment quote is styled through
style class quote (see Section 9.2).
Notice that this solution has very little to do with
“emphasising” in the proper sense, since here we
short-circuit the implicit path from \em to oblique fonts.
10.2 Changing defaults for type-styles
HEVEA default rendering of type style changes is described in
section B.15.1.
For instance, the following example shows the default rendering
for the font shapes:
By default, \itshape is italics, \slshape is oblique
italics, \scshape is small-caps (thanks to style sheets) and \upshape is no style at all.
All shapes are mutually exclusive, this means that each shape
declaration cancels the effect of other active shape declarations.
For instance, in the example, small caps shapes is small caps (no italics here).
italic shape slanted shape
small caps shape upright shape
If one wishes to change the rendering of some of the shapes (say slanted
caps), then one should redefine the old-style \sl declaration.
For instance, to render slanted as Helvetica (why so?), one should
redefine \sl by \renewcommand{\sl}{\@span{style="font-family:Helvetica"}} in
macros.hva.
And now, the shape example above gets rendered as follows:
italic shape slanted shape
small caps shape upright shape
Redefining the old-style \sl is compatible with the cancellation
mechanism, redefining \slshape is not.
Thus, redefining directly LATEX 2є \slshape with
\renewcommand{\slshape}{} would yield:
italic shape slanted shape
small caps shape upright shape
Hence, redefining old-style declarations using internal commands
should yield satisfactory output.
However, since cancellation is done at the html
level, a declaration belonging to one component may sometimes cancel the
effect of another that belongs to another component.
Anyway, you might have not noticed it if I had not told you.
10.3 Changing the interface of a command
Assume for instance that the base style of doc.tex is
jsc (the
Journal of Symbolic Computation style for articles).
For running HEVEA, the jsc style can be replaced by
article
style, but for a few commands whose calling interface is changed.
In particular, the \title command
takes an extra optional argument (which HEVEA should ignore
anyway).
However, HEVEA can process the document as it stands.
One solution to insert the following lines into macros.hva:
\input{article.hva}% Force document class 'article'
\let\oldtitle=\title
\renewcommand{\title}[2][]{\oldtitle{#2}}
The effect is to replace \title by a new command which
calls HEVEA \title with the appropriate argument.
10.4 Checking the optional argument within a command
HEVEA fully implements LATEX 2є \newcommand.
That is, users can define commands with an optional argument.
Such a feature permits to write a \epsfbox command that
has the same interface as the LATEX command and
echoes itself as it is invoked to the image file.
To do this, the HEVEA \epsfbox command has to check
whether it is invoked with an optional argument or not.
This can be achieved as follows:
Semi-automatic generation of included images is described in
section 6.
Links to included images are generated by the \imageflush
command, which calls the \imgsrc command:
That is, you may supply a html-style attribute to the included image,
as an optional argument to the \imageflush command.
By default, images are PNG images stored in .png files.
HEVEA provides support for the alternative GIF image file format.
It suffices to invoke hevea as:
# hevea gif.hvadoc.tex
Then imagen must be run with option -gif:
# imagen -gifdoc
A convenient alternative is to invoke hevea as:
# hevea -fix gif.hvadoc.tex
Then hevea will invoke imagen with the appropriate
option when it thinks images need to be rebuild.
10.6 Storing images in a separate directory
By redefining the \heveaimagedir command, users can specify a
directory for images.
More precisely, if the following redefinition occurs in the document
preamble.
\renewcommand{\heveaimagedir}{dir}
Then, all links to images in the produced html file will be as
“dir/…”.
Then imagen must be invoked with option -
todir:
# imagen -todirdirdoc
As usual, hevea will invoke imagen with the
appropriate option, provided it is passed the -fix option.
10.7 Controlling imagen from document source
The internal command
\@addimagenopt{option} add
the text option to imagen command-line options, when
launched automatically by hevea (i.e. when
hevea is given the -fix command-line option).
For instance, to instruct hevea/imagen to
reduce all images by a factor of √2, it suffices to state:
%HEVEA\@addimagenopt{-mag 707}
See section C.1.5 for the list of command-line options
accepted by imagen.
hevea-2.23-manual/manual005.html 0000644 0043171 0051216 00000064526 12477067073 016453 0 ustar maranget cristal
A note on style
Sequence of spaces normally are translated into one single space.
Newlines in the input document undergo a special treatement.
A newline triggers a special scanning mode that reads all following
spaces and newlines. In case at least one additional newline character
is read, then HEVEA executes the \par command.
Otherwise, HEVEA outputs a single newline character.
This process approximates TEX process for introducting paragraph
breaks and, as a result, empty lines produce paragraph breaks.
Space after commands with no argument is skipped (as in LATEX) —
however this is not true in math mode, as explained in
section 3.2.1.
The following two subsections describe management of paragraphs and
spaces after command sequences in greater detail.
They can be skipped in first reading.
3.1.1 Spurious Paragraphs
Paragraphs are rendered by the means of p elements.
HEVEA is a bit simplistic in breaking paragraphs and spurious paragraphs
may be present in the final html document.
Normally, as HEVEA never outputs p elements whose contents is
made of spaces only, this should not happen very often.
Unfortunately, some commands do not produce any output in LATEX,
while they do produce output in HEVEA: those commands
are \label, \index etc.
HEVEA translates
\label{name} into the anchor
<a id="name"></a>. As a result, the following
source fragment will introduce a spurious paragraph.
This a first paragraph.
\label{label}
This is another paragraph.
Indeed, whe have the following translation:
<p>This a first paragraph.</p>
<p><a id="label"></a></p>
<p>This is another paragraph.</p>
Which your browser renders as follows — with additional borders
emphasizing p elements.
This a first paragraph.
This is another paragraph.
Most of the time, such extra paragraphs remain unnoticed.
Of course, they can be supressed by erasing one of the empty
lines. For instance:
This a first paragraph.
\label{label}
This is another paragraph.
A similar situation occurs when a sectioning command is followed by
\label and a paragraph break:
\section*{A section}\label{section:label}
First paragraph.
Produced html is, after a few cosmetic simplifications:
In all cases, this amounts to avoiding a paragraph whose contents
consists in a sole \label command.
Spurious paragraphs are more easily seen by running hevea
with the command-line option -dv, which instructs
hevea to add border on some of the elements it produces,
including p elements.
3.1.2 Spaces after Commands
Space after commands with no argument is skipped.
Consider the following example:
\newcommand{\open}{(}
\newcommand{\close}{)}
\open text opened by ``\verb+\open+''
and closed by ``\verb+\close+''\close.
We get:
(text opened by “\open” and closed by
“\close”).
In the output above, the space after \open does not
find its way to the output.
More generally,
HEVEA tries to emulate LATEX behaviour in all situations, but
discrepancies probably exist.
Thus, users are invited to make explicit what they want.
This is good practice anyway, because LATEX is mysterious
here. Consider the following example, where the \tryspace
macro is first applied and then expansed by hand:
\newcommand{\bfsymbol}{\textbf{symbol}}
\newcommand{\tryspace}[1]{#1 XXX}
Some space: \tryspace{\bfsymbol}\\
No space: \bfsymbol XXX
Spacing is a bit chaotic here,
the space after symbol remains when #1 is substituted for it
by LATEX (or HEVEA).
Some space
:
symbol XXX
No space
:
symbolXXX
Note that, if a space before “XXX” is wanted, then
one should probably write:
\newcommand{\tryspace}[1]{#1{} XXX}
Finally, whether the tabulation character is a space or not
is random, so avoid tabs in your source document.
3.2 Math mode
HEVEA math mode is not very far from normal text mode, except that
all letters are shown in italics and that space after macros
is echoed.
However, typesetting math formulas in html rises two difficulties.
First, formulas contain symbols, such as Greek letters; second,
even simple formulas do not follow the simple basic typesetting model of html.
3.2.1 Spacing in math mode
By contrast with LATEX, spaces from the input are significant in
math mode, this
feature allows users to instruct HEVEA
on how to put space in their formulas.
For instance, \alpha\rightarrow\beta is typeset without spaces between
symbols, whereas \alpha \rightarrow \beta produces these spaces.
\alpha\rightarrow\beta
:
α→β
\alpha \rightarrow \beta
:
α → β
Note that LATEX ignores spaces in math mode, so that users can
freely adjust HEVEA output without changing anything to LATEX
output.
3.2.2 Symbols
Figure 1: Some symbols
\in:
∈
\notin:
∉
\int:
∫
\prod:
∏
\preceq:
≼
\prec:
≺
\leq:
≤
\geq:
≥
\cup:
∪
\cap:
∩
\supset:
⊃
\subset:
⊂
\supseteq:
⊇
\subseteq:
⊆
With respect to previous versions of HEVEA since the begining, the
treatment of symbols has significantly evolved. Outputting symbols is
now performed by using Unicode character references, an option that
much more complies whith standards than the previous option of
selecting a “symbol” font. Observe that this choice is now
possible, because more and more browsers correctly display such
references. See Figure 1 for a few such symbols.
However, this means that ancient or purposely limited browsers (such as
text-oriented browsers) cannot display maths, as translated by HEVEA.
For authors that insist on avoiding symbols that cannot be shown
by any browser, HEVEA offers a degraded mode that outputs text
in place of symbols.
HEVEA operates in this mode when given the -textsymbols
command-line option. Replacement text is in English.
For instance. the “∈” symbol is replace by “in”.
This is far from being satisfactory, but degraded mode may be
appropriate for documents than contain few symbols.
3.2.3 Displays
Apart from containing symbols, formulas specify strong typesetting
constraints: sub-elements must be combined together following patterns
that departs from normal text typesetting. For instance, fractions
numerators and denominators must be placed one above the other.
HEVEA handles such constraints in display mode only.
The main two operating modes of HEVEA are text mode and
display mode.
Text mode is the mode for typesetting normal text,
when in this mode, text items are echoed one following the other and
paragraph breaks are just blank lines, both in input and output.
The so called displayed-paragraph environments of LATEX (such as
center or quote) are rendered by html block-level
elements (such as div or blockquote).
Rendering is correct becauses both LATEX displayed environments and
html block-level elements start a new line.
Conversly, since opening a html block-level elements means starting
a new line, any text that sould appear inside a paragraph must be
translated using only html text-level elements.
HEVEA chooses to translate in-text formulas that way.
HEVEA display mode allows more control on text placement, since
entering display mode means opening
a html table element and that tables allow to control the
relative position of their sub-elements.
Displays come in two flavor, horizontal displays and vertical
displays.
An horizontal display is a one-row table, while a vertical display is
a one-column table. These tables holds display sub-elements, displays
sub-elements being centered vertically in horizontal display mode and
horizontally in vertical display mode.
Display mode is first opened by opening a displaymath environment
(e.g. by $$
or \[).
Then, sub-displays are opened by LATEX constructs which require
them.
For instance, a displayed fraction (\frac) opens a vertical display.
The distinction between text and display modes clearly appears while
typesetting math formulas.
An in-text formula such as
$\int_1^2 xdx = \frac{3}{2}$ appears as:
∫12xdx =3/2,
while the same formula has a better aspect in display mode:
∫
2
1
xdx =
3
2
As a consequence, HEVEA is more powerful in display mode and
formulas should be displayed as soon as they get a bit complicated.
This rule is also true in LATEX but it is more strict in HEVEA,
since html capabilities to typeset formulas inside text are quite
poor.
In particular, it is not possible to get in-text “real” fractions or
in-text limit-like subscripts.
Users should remember that HEVEA is not TEX or LATEX and that
HEVEA author neither is D. E. Knuth nor L. Lamport.
Thus, some formulas may be rendered poorly.
For instance, two fractions with different denominator and numerator
height look strange.
1
N
∑
i=0
Ui
=
N
∑
i=0
Ui
1
The reason is that vertical displays in an horizontal display are
html tables
that always get centered in the vertical direction.
Such a crude model cannot faithfully emulate any TEX box placement.
Users can get an idea on how HEVEA combines elements in display mode
by giving the -dv command-line option, which
instructs HEVEA to add
borders to the table elements introduced by displays.
3.2.4 Arrays and display mode
By contrast with formulas, which HEVEA attempts to render with
text-level elements only when they appear inside paragraphs, LATEX arrays
always translate to the
block-level element table, thereby introducing non-desired line
breaks before and after in-text arrays.
As a consequence, in-text arrays yield an acceptable output, only while
alone in a paragraph.
Consider the following source:
This is a small array:
\begin{tabular}{|cc|}
\hline item-1 & item-2 \\
\hline\end{tabular}. Next sentence.
We get:
This is a small array:
item-1
item-2
. Next sentence.
However, since in some sense, all html tables are displayed, the
array and tabular environments implicitly open display
mode, thus allowing a satisfactory typesetting of formulas in
arrays. More precisely, array elements whose column format
specification is l, c or r are typeset in display
mode (see section B.10.2).
3.3 Warnings
When HEVEA thinks it cannot translate a symbol or construct
properly, it issues a warning. This draws user attention onto a
potential problem. However, rendering may be correct.
In the following (silly) example, HEVEA gets nervous because of
the complicated length given as argument to \hspace:
\newlength{\mylength}\setlength{\mylength}{5pt}
\begin{tabular}{c@{\hspace{\mylength}}c}
Before & After
\end{tabular}
Note that all warnings can be suppressed with the -s (silent)
option.
When a warning reveals a real problem, it can often be cured by
writing a specific macro. The next two sections introduce HEVEA
macros, then section 4 describes how to proceed with
greater detail.
3.4 Commands
Just like LATEX, HEVEA can be seen as a macro language, macros
are rewritten until no more expansion is possible. Then, either some
characters (such as letters, integers…) are outputed or some
internal operation (such as changing font attributes, or arranging
text items in a certain manner) are performed.
This scheme favors easy extension of program capabilities
by users. However, predicting program behaviour and correcting errors
may prove difficult, since final output or errors
may occur after several levels of macro expansion.
As a consequence, users can tailor HEVEA to their needs, but it
remains a subtle task.
Nevertheless, happy LATEX users should enjoy customizing
HEVEA, since this is done by writing LATEX code.
3.5 Style choices
LATEX and html differ in many aspects. For instance, LATEX allows
fine control over text placement, whereas
html does not.
More symbols and font attributes are available in LATEX than in
html. Conversely, html has font attributes, such as color, which
standard LATEX has not.
Therefore, there are many situations where HEVEA just cannot
render the visual effect of LATEX constructions. Here some choices
have to be made. For instance, calligraphic letters (\mathcal)
are rendered in red.
If you are not satisfied with HEVEA rendering of text style
declarations, then you
can choose your own, by redefining the \cal
macros, using \renewcommand, the macro redefinition operator of
LATEX. The key point is that you need not worry about HEVEA
internals: just redefine the old-LATEX style text-style
declarations (i.e.\it, \sc, etc.) and everything should
get fine:
(See sections 4 and 5 on how to make such
changes while leaving your file processable by LATEX, and
section 10.2 for a more thorough descripton of
customizing type styles).
With such redefinitions, we get:
This is small caps and this is CALLIGRAPHIC LETTERS
Note that many of LATEX commands and environments are defined in the
hevea.hva file that HEVEA loads before processing any
input.
These constructs are written using LATEX source code, in the end they
invoke HEVEA internal commands.
Other LATEX constructs, such as
LATEX key constructs or HEVEA internal commands (see section 8.3),
that require special processing are defined
in HEVEA source code.
However, the vast majority of these definitions can be overridden by a
redefinition.
This may prove useless, since there is little point in
redefining core constructs such as \newcommand for instance.
Blob 
